Форум » Спутниковые ресиверы HD » CTech ET9000 Enigma 2 Twin Tuner » Ответить
CTech ET9000 Enigma 2 Twin Tuner
kladovchk: [copyright]CTech ET9000 Enigma 2 Twin Tuner[/copyright] Linux для всех - это девиз Clarke-Tech ET9000. Немецкий производитель Clarke-Tech представила новую модель ET 9000 на основе системы Linux операционной Enigma2 спутниковый тюнер Twin. Новое поколение Clarke-Tech ET9000 так, что она становится очень конкурентоспособным для Vu+ Duo или Dreambox. С открытым исходным кодом Linux OS (Enigma2) 400 МГц MIPS Broadcom 7405 процессор Twin DVB-S2 тюнера (Silicon тюнер) Аппаратное декодирование MPEG2 / H.264 (DVB-совместимый) 16-значный буквенно-цифровой дисплей VFD 2x Общий интерфейс слот для модуля декодирования 2 читателя (Conax Embedded) Сетевой интерфейс 10/100 Мбит / с Ethernet 3x USB 2.0 (1x передняя панель / задняя панель 2) 1 х внутренний разъем SATA для подключения HDD (жесткий диск не входит в комплект) Экстен 1x E-SATA разъем 1x последовательный интерфейс V.24/RS232 HDMI разъем 2x Scart 1 компонентный выход YPrPb 1 х оптический S / PDIF Изменение каналов быстрее чем за 1 секунду EPG (электронный программный гид) Поддержка плагинов (JPEG, MP3, DivX ...) поддержку своих списков каналов Многоязычный OSD, поддержка скинов полностью автоматический и ручной поиск каналов Videotext, телетекст DiSEqC 1,0, 1,1 и 1,2 Видео: Видео-разрешение (720 х 576 линий), 576p, 720p, 1080i Видео декодирования совместимых с MPEG-2, MPEG-4 Входная скорость потока 2-45 Мсимв / с S / N> 53 дБ Аудио: Декодирование AC 3, MPEG-4 (HE-AAC), MPEG-1 Layer 1, 2 и 332/44.1/48 кГц S / N> 65 дБ Потребление: <25 Вт (мощность приемника - горизонтальная поляризация) сбор LNB 400 мА <20 Вт (мощность приемника, без LNB) <1 Вт (спящий режим) Электропитание 100-240 Вольт / 50-60 Гц ------------------------------------------------------------------------------ Linux устройства для сравнения: --------------------------------------------------------------------------------- Форум: http://forum.italysat.it/ http://www.et-view-support.com/Portal.php/ http://forum.sifteam.eu/ http://clarketech.funfiles.cc/index.php http://www.hdfreaks.cc/index.php?page=Index http://www.pli-images.org/forum/viewforum.php?forum_id=64#post_175778 http://www.wizardfox.net/clarke-tech-433/ctech-et9000-enigma-2-twin-tuner-25983/ http://www.et-support.com/forum/forum.php http://www.xtrend-community.com/ http://www.world-of-satellite.com/forumdisplay.php?174-Clarke-Tech-Xtrend-ET9000-Images http://www.vuplus-community.net/board/ http://aaf-board.com/forum/forum.php http://www.dreamboxuk.com/forums/forum.php http://www.et-view.com/ http://www.clarke-xtrend-support.com/Forum/forumdisplay.php?152- http://www.et-view.de/forum/index.php?page=Index Предупреждение всем владельцам оборудования ( ET - 9000 ) Никогда не следует удалить батарею устройства, как устройство будет терять свою память и нужно будет перепрограммировать в этом случае заводе и этот процесс занимает от четырех недель, как вам нужно нести расходы, связанные перепрограммированием
Ответов - 110, стр:
1 2 3 4 5 6 All
kladovchk: HDF-Teamimage v1 29.12.2010 ET9000 HDF-Teamimage based on OpenPLi2.0 Unser erstes Clark-tech ET9000 Image basierend wie immer auf dem bewährten PLi. Den Ordner et9000 auf einen USB-Stick entpacken, anstecken und den Receiver am Schalter neustarten. Entweder wird das Image im Display selber angeboten oder ihr müsst beim Starten die Menü Taste gedrückt halten. Nach dem Flashen wird automatisch ein Addon Pack installiert. Solange steht auf dem Bildschirm "First Boot please wait". Je nach Leitung dauert das einige Minuten. Also nicht ungeduldig werden oder abbrechen. Wenn die Box nicht am Internet hängt wird dieser Vorgang übersprungen. Das Firstboot Paket kann auch später noch im HDF Panel nachinstalliert werden. Im Firstboot Paket sind EMU's Picon's, Plugin's, Skin's enthalten. Hinweise zur Bedienung: Rot - Timer Editor Rot Lang - Bitrate Viewer Grün - Submenü Grün Lang - frei Gelb - Timeshift Gelb Lang - Mount Infos Blau - Erweiterungen Blau Lang - Zap-History Guide - Cool Multi Guide Guide Lang - Multi EPG Info - Sender EPG Info Lang - aktuelle Sender Info Exit - Virtual Zap mit PIP Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen vkey - Zugriff auf aufgenommene Filme EMUs und Softcams: Die Configs liegen unter /var/keys bzw. unter /etc. et9000_hdfreaks.v1_PLi2.0_29122010
kladovchk: Clarke - Tech Toolbox v.1.4 Clarke - Tech Toolbox v.1.4 Как использовать ET9000 Control Center ---------------------------------- 1. Запустите приложение ET9000CC.exe. 2. Введите IP-адрес вашего приемника в поле IP-адрес, например «192.168.1.5» 3. Если вы изменили пароль на ресивер, введите пароль в поле пароля В противном случае оставьте пустым. 4. Нажмите кнопку «Подключить» ET9000 Control Center CTechEditorStudio_Setup316
kladovchk: Black Hole Clarke Tech ET-9000 v. 1.4.3 OE-BH 1.6 Specifications: - Drivers et9000 12. 1. 2011 -support 1080p24/25/30 and 3d resolutions -use deinterlacer -vfd improvements (show various symbols, use slower scroll speed) -accelerated alpha blending - skin: Army Gradient - extra plugins osd dvb-t full BlackHole support WARNING: This Image has the latest drivers and CAN NOT be installed in multiboot. The image MUST be installed in the flash. Black Hole can not support images not installed in the flash. This latest version of the Black Hole series has been entirely rewritten and improved in the code for maximum stability and performance. Please note that of all images Black Hole now has the best epg system: - Integrated OpenEpg - Rytec dedicated epg.dat - New system epg.dat outside. This last feature gives the possibility to various forums or communities to create their favorite EPG data files and load them into a web space. Community members can then download it from our servers. This feature provides other benefits such as: Increase download speed of EPG Download EPG from any channel Schedule the download of EPG decoder even during standby Users can customize the providers using Add / Remove function Main functions of the buttons on the remote OK button = Skin with simple information OK button x 2 = Extra Info Skin Blue button = Black Hole Blue Panel Blue button and then Red button = Black Hole Epg Panel Blue button and then Yellow button = System Monitor Panel Blue button long press = Extensions Yellow button = Time Shift Green button = Black Hole Green Panel Green button long press = Subservices Green button and then Red button = Fast Plugin Setup Green button x 2 = Fast Plugin Button Red = Start Record Addons Green button and then Yellow button takes you to:- Dedicated server for BlackHole addons Download and install additional packages from the Black Hole server Infobar / OSD Analog Clock Enigma2 Channel orbital location Advanced Tuner Info: Sr Freq Pol Fec Signal SNR, BER Infobar picons Characteristics of BlackHole Panels Blue Panel Extra Settings Black Hole Cron Manager (Manage schedules) OSD Settings (OSD configuration) Manager Kernel Modules (Kernel module operator) Inadyn Settings (Configure Inadyn) Swap File Settings (Configure File Swap) Hard Disk Settings (Configure Hard Drive) Black Hole Mount Wizard (Mount points) OpenVPN Panel ( OpenVPN Panel) Samba / CIFS Panel ( Samba Panel) NFS Server Panel ( NFS server Panel) Telnet Panel ( Telnet Panel) FTP Panel ( FTP Panel) Usb Tuner Panel Info Panel 1 - E2 Setting (Enigma2 configurations) 2 - Service Information (information system) 3 - About (info) Memory (Memory) Space (capacity) CPU (processor) Process (process) EPG Panel Global settings (global settings EPG) Setting Provider (ISP settings) Green Panel Fast Plugin Setup (Configure quick access to your favourite plugin) Fast Plugin (Access your favourite plugin) Addons (added) Addons Download Manager (Manager for package downloading) Installation manual packages (Manual installation of Black Hole packages) Manual Install IPK packages (Manual installation of IPK packages) Addons Uninstall Panel (Uninstalled packages) Black Hole Statistics (See connections, top downloads and more) Credits Thanks to the group of Beta Testers. Thanks to Rytec for providing us with the server with all epg.dat files. Thanks to MaxZ4 for Integrated EPG loader. Thanks to Lukkino (VDR-Italy) for the source code of OpenTV. Thanks to Reinh@rd for the file satellites.xml. DISCLAIMER THE BLACK HOLE IMAGE IS BASED ON THE OFFICIAL FIRMWARE PUBLISHED BY CT AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES. THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION. LASTLY, THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR IILEGAL PURPOSES SUCH AS CARD SHARING. LICENSE (TERM OF USE) THE BLACK HOLE IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES. ANY CHANGES OR ADDITIONS TO BLACK HOLE IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REWOKE OF THIS LICENSE BlackHole-1.4.3-et9000-20110113154337_usb
kladovchk: New drivers for et9000 of 17/01/2011 20110117 -vfd settings: control scroll properties and symbols (/proc/stb/lcd/*) -use pip for second tv only video (/proc/stb/vmpeg/1/external) -ci support fixes -cardreader fixes -fan control (enable/disable fan vcc) et9000-drivers-gcc44-20110117 et9000-dvb-modules_2.6.18-7.4+20110117-r1.1_et9000
kladovchk: HDF-Teamimage v2 23.01.2011 Clark-tech v2 based as always on the proven PLi. ET9000 folder on a USB flash drive to unpack, plug in and reboot the receiver to switch. Either the image is in the display itself will be offered or you have to think when you start the menu button. After flashing automatically installs an addon pack. As long as the on-screen "First Boot please wait ". Depending on the line takes a few minutes. So do not be impatient or cancel. When the box is not on the Internet, this process is skipped. The First Boot package can be installed separately later in the HDF-Toolbox. In the First Boot EMU's are Picon's package included plugin's, Skin's. General information: Red - Timer Editor Red Cross - Bitrate Viewer Green - submenu Green Cross - free Yellow - Timeshift Yellow Cross - Mount info Blue - Extensions Blue Cross - Zap-History Info - Cool Multi Guide Long Guide - Channel Info Info Lang - current station info Exit - Virtual Zap with PIP Channel + / - Express zap D-pad up / down - Channel Selection D-pad left / right - quick zap VKEY - Access to recorded movies EMUs and softcams: The configs are in / var / keys and in / etc. DOWNLOAD IMAGE et9000_hdfreaks.v2_PLi2.0_23022011
kladovchk: Clarke tech tool box1.3.1 BY Ghost The new version 1.3.1: -and then I updated the following programs: -CT study By editor Cecèlife version 2.13 -edit 1.6.5 -Ct Uploader 1.9.3 -STB Daemun 1.2.1 documents are put in more: -USLAS Guide -CT study editor Help Network Function-Guide all in Italian the following guides have remained the same as the previous version -tricks -inserting BISS and CW -Restore Ct2011 -ET9000CC CT_TOOLBOX
kladovchk: [copyright] Кларк-Tech ET9000 - PVR Twin HD ресивер с Linux Так вот он, долгожданный ET9000. Прежде чем ввести эту единицу, я хотел бы ответить всем, кто спросил меня, это устройство имеет несколько раз сказал: "Да, это действительно даже лучше, чем Marusys Ву + Duo .." Однако, поскольку текст не определен только специалистами с аналогичными устройствами будет начать с самого начала, даже если я не пишу отзывы нормально, но я хочу, чтобы уделять больше внимания практической возможности этого ресивера, даже в то время как мне убедить менее опытных пользователей, которые не приемник, которых требует специальных знаний, а текущий верхний HDTV спутниковый ресивер 2011 года. Производитель продукт немецкой компании Кларк Технология известна своим качеством спутниковых технологий. ET9000 смонтирован непосредственно на производителя и каждая часть идет через продажи испытаний предварительно. Простой упаковке (упаковка) устройство действительно визуально уровне. Пакет в дополнение к устройству HDMI и кабель SATA, кабель спутниковой короткий (так называемый проходной кабель) для подключения тюнера, если у вас есть только один LNB, оригинальный ручной и программируемый, солидный пульт дистанционного управления. Чешская руководство предлагаемых продавца сайте для скачивания. Даже тогда, когда устройство удаляется из упаковки, вы обнаружите, что "что-то другое", чем мы, к сожалению, привыкли ... Приемник уродливый черный ящик пластика с много ненужных знаков, таких как различные телевизионные приставки, но дизайн можно сравнить с брендом BD или DVD-плеер. Приемник, будь то или выключить, это выглядит действительно хорошо. Дисплей дает появление профессионализм, который вы ищете для подобных устройств напрасно. Приемник, даже если их работа достаточно пассивного охлаждения (Будем надеяться, что не мешает производителю), что очень важно, чтобы кто-то, это абсолютно бесшумно. Под откидной все обложки вы можете из этого класса устройств ожидается, поэтому 2xCI, 1xUSB и двух считывателей карт доступа, не хватает, возможно, только карты памяти читателя. Спереди, сбоку разъем также полностью оборудованный и есть все, чтобы получатель этого класса. Что подразумевается под "этого класса"? Я имею в виду HDTV PVR спутниковых ресиверов оснащены двумя тюнерами DVB-S/S2, работающих как в SD и HD MPEG-2 и MPEG-4, с большими, внутренний SATA HDD, использование карт доступа, оборудование для двусторонней связи два с ПК Интернет, мультимедийные средства и т.д. Эти приемники сделаны в течение длительного времени и не требует для работы на открытой платформе Linux, но это не секрет, что Linux устройств большую поддержку со стороны девелоперов и экспертов со всего мира, которые всегда означает , которые являются универсально применимой. Технические характеристики приемника ■ 400 МГц MIPS процессор ■ HDTV H.264 аппаратного ■ Двойные ТВ-тюнер ■ OSD Linux ■ 10/100 Мбит / с Ethernet LAN порта ■ Графический VFD дисплей 12 букв ■ 3 х USB 2.0 портов, в частности, внешние HDD, клавиатура, мышь, центр, DVD-диск ■ 1 х внутренних жестких дисков SATA ■ 1 х ESATA Внешние ■ 1 х HDMI выход ■ 1 х YUV выход ■ 2 х слотов Common Interface ■ 2 х Card Reader ■ Мультимедиа Видео / Аудио потоковое вещание через локальную сеть ■ S / PDIF выход Dolby Digital AC3 ■ 2 SCART (RGB, CVBS или S-Video) ■ RS232 ■ 8 Мб (загрузчик - может привести к повреждению!) ■ 128 Мб Flash / 512 Мб DDR памяти ■ USALS DiSEqC 1.0/1.1/1.2/1.3 ■ Мультимедийный проигрыватель ■ Скачать плагин ■ PIP (картинка в картинке) Приемник Сравнение Для сравнения, приемник с конкурентами, я выбрал два других аналогичных оборудованы устройствами, которые в настоящее время имеют в наличии, и Topfield 2100 и CFP-Marusys Ву + Duo. Все три машины имеют два тюнера DVB-S/S2, подключение к сети и многое другое. Topfield также имеет встроенный жесткий диск, а два других устройства в базовой комплектации отсутствует, но вы можете заказать его у поставщиков или заказать его (есть) установлены дополнительно, который, несомненно, приносят некоторую финансовую выгоду. Все три приемника может быть подключен к внешний жесткий диск через USB или ESATA. Из этой троицы, работает только на оригинальных FW Topfield производителя, который постоянно обновляется. Два других устройства работают на открытом Enigma2 Linux и зависит только от пользователя, что прошивка от различных групп развития предпочтут. Дизайн и конструкция, можно сказать, что все три приемники хорошо сделано. Topfield уже и выше, чем два других приемников. ET9000 является пассивное охлаждение, так что его операции полностью молчать, не говорить Topfield. Все три машины готовы к двух модулей CI. ET9000 и Ву + дуэт также два внутренних карт, что Topfield отсутствует. Все три приемники работают быстрый, стабильный и полностью сотрудничать с жесткого диска, внутренний или внешний. Пользовательский интерфейс, таким образом, известным валюты, ET9000 и Ву + дуэт почти идентичны, SRP-2100 использует свою собственную валюту, что является общим в приемники Topfield этой серии. ET9000 и КФП-2100 предлагают Ву + Duo PIP, картинка в картинке. Topfield имеет режим сна, называется режимом ожидания, который начинается довольно быстро. Два других устройства можно выбрать, будет ли приемник включен в режим ожидания (поверхностный сон), когда ресивер находится еще в состоянии общаться по сети потока, и которая начала устройства быстро, или отключить так называемый спящий режим, когда устройство полностью выключен, что позволяет экономить электроэнергию, но начало приемника немного дольше. Здесь следует отметить, что Кларк Технология ET9000 начала заметно быстрее, чем Duo + Ву. Даже при нормальной эксплуатации это знать, что это ET9000 случайных трио реагирует на все команды довольно быстро, что субъективно кажется более эффективным. Описание работы Кларк Технология ET9000 предоставляет аналогичные или же варианты обслуживания, как известно Marusys Ву + Duo Dreambox 8000s. Для тех, кто не знает, однако, инструменты, я стараюсь, чтобы описать ее возможности. Хотя нормальной работы не является необходимым для полного использования всех возможностей и аналогичные инструменты имеют хороший внутренний (или, по крайней мере внешний) жесткий диск и подключение к сети с доступом в Интернет. Еще лучше использовать фиксированный IP-адрес. Это хорошо для замены оригинальных прошивок для неофициальных (в моем случае HDF) и установить необходимые плагины и эмуляторов. Это звучит для посторонних, хотя и сложная, но настолько сложны, это не так, кроме того, что приемник можно заказать с предустановленной уже выбран или рекомендованные прошивки и даже установлен аксессуаров. Для пользователей, которые имеют основные навыки работы на ПК, наверняка поставили перед собой задачу совместного использования файлов между ПК и ET9000. Что, однако, пользователь получает? Если вы хотите использовать устройство только в качестве спутникового приемника, вы легко можете пропустить этот шаг. Но если компьютер использует разнообразные мультимедийные файлы, такие как музыка или видео, вам понравится эта очень интересная особенность, которая позволяет двусторонней связи через стандартный Интернет, который не просто передача данных! ET9000 В самом деле, сети сообщили, как нормальный компьютер с именем ET9000. Так у вас есть свободный доступ к записи, хранящиеся на жестком диске и приемник могут быть знакомы с программой VLC-Player, чтобы играть все мультимедийные файлы с любого сетевого компьютера дома. Вы можете играть в том же файле, таких как запись телепрограмм на разных компьютерах одновременно, приемник может одновременно записывать другую телепрограмму (S) и даже на экране подключенного телевизора для отображения фотографий, видео или музыку с вашего ПК. Представьте себе ситуацию: вы смотреть любимые передачи футбол в CT4, но новая серия начинается с экрана, и вы, несомненно, будет счастливым, чтобы выпустить его жена. Нет проблем, начать запись программы CT4 и переключиться на новые. Это не является необычным, он может даже старый добрый видеомагнитофон! Но вдруг звонок и дверь будет посетить. Их не волнует, серии, например, но хочет, чтобы посмотреть фотографии с недавнего отдыха. Нет проблем! Когда вы начнете запись сериала NOVA, а также записанные на жесткий диск. Тогда вы поймете, что не только не видеть, что игра в футбол, но и не ожидается фильм HD телевизор. Нет проблем! Перед телевизором с помощью ET9000 начала просмотра фотографий, хранящихся на домашних ПК, управлять, чтобы начать запись долгожданного фильма на HD телевизор. Поскольку у вас есть фотографии отпуск, но неоднократно видел, свою очередь, на коленях и начать запись футбольного матча с минуту, когда он выиграл серию, хотя он по-прежнему записи конца! Объявления после первого тайма, и быстро назад вы снова на текущее время. Когда футбольный матч заканчивается в ноутбуке можно смотреть в прямом эфире телевидения, таких как отчеты о CT24 и т.д. На следующий день на работе, вы понимаете, что вы не пропустите начало финального матча хоккейного турнира. Нет проблем, из офиса через Интернет, чтобы связаться с приемником ET9000 и простой в программе запись хоккейного матча. Конечно, вы понимаете, что возможности практически безграничны. Это является необходимым, но приемник подключается к Twin LNB или так называемые multifokusní спутниковой антенны, если вы хотите принимать телевизионные программы от двух или более спутников. Поэтому лучше рассмотреть фиксированной спутниковой антенны с нескольких преобразователей, преобразователей сами нуждаются в правильном выборе. Если у вас только один спутниковый ресивер с двумя тюнера, просто меблированные с двумя конвертера спутниковой антенны, которая является относительно доступной цене. Это проверяется, ET9000 умеет аппаратно декодировать и записывать 6 программ одновременно, во время игры DVD с компьютера или USB-памяти по-прежнему посылает телевизора кадры для ПК. Эта ситуация, конечно, крайний, но он говорит совершенно ясно о его варианты. Для ET9000 не является проблемой для воспроизведения мультимедийных файлов в форматах JPG, AVI, MP3, MP4, MPEG, MKV, разными форматами субтитров, и т.д. файлов на веб-сайте www.youtube.com, любой интернет-радио, прогноз погоды и многое другое. Установка параметров Функции для пользовательских настроек можно сказать, возможно, это действительно полным. Я не буду расширения на телетекста и аналогичных исторических обычного. Я хочу отметить, что Linux Enigma 2 позволяет пользователям устанавливать почти все, что вы можете думать о. Если вы эксперт по компьютерам и Linux, и, конечно, время, чтобы установить и настроить, что не ... Но как обычный пользователь, вы говорите, полное превосходство над приемником. Все настроены и отдельных программ (любимой) списки, а также все другие настройки могут быть сохранены в приемнике, даже компьютер. Чтобы описать все эти варианты и коммунальные услуги не хотите прибегать, но принцип ясен, если у вас нет приемника на дому и постепенно научиться использовать эти дополнительные опции. Все приемники в этом классе, работающих на программное обеспечение Linux Enigma 2, может быть прекрасно адаптирована к условиям и потребностям пользователей. Я осмелюсь сказать, что так же, как нет двух компьютерных программ, которые все же, Есть нет двух Linux спутниковых приемников, которые той же операционной системы и добавлять те же настройки. Только то, что часть является уникальной, в точном соответствии с требованиями заказчика. Это красиво. Телевидение производится в больших партий, все же, есть же контроль, те же функции, как производятся и используются и расширения или модернизации очень ограниченное! Для Кларка Технология ET9000 ситуация совершенно иная, что делает устройство интересным. Ее пределами только воображение своих пользователей. Linux Enigma 2 использует яркие умы из разных стран мира на протяжении многих лет и функции операционной системы постоянно расширяется и совершенствуется. Конец После первоначального скептицизма (в другом DM8000-клон) в общей численности учащихся в течение трех недель строгого испытания энтузиазм, который я еще не ушел. Хороший дизайн, легкий и быстрый монтаж, очень высокого качества HDTV видео, скорость реакции на команды пульта дистанционного управления: это техническая ET9000 Кларк уверен, что спутниковые приемники этого класса являются далеко не обычным. По осуществление и выполнение данного ресивера, я твердо верю, что она будет пользоваться поддержкой разработчиков Linux, а также классические Dreambox 8000s. Текущая цена единицы составляет около 11,000, - CZK и он соответствует его возможностям. Цена отнюдь не преувеличение, хотя на первый взгляд несколько выше, чем в аналогичных, но несколько менее эффективные продукты. Наконец, я хотел бы поблагодарить Чешскую дистрибьютор компании WWW.SWOOPO.CZ , любезно интересное устройство. Петр Дудек 8 февраля 2011[/copyright] Перевод с чешского: [hideguest]http://www.parabola.cz/clanky/4212/clarke-tech-et9000-pvr-twin-hd-prijimac-s-os-linux/[/hideguest]
kladovchk: ViX Team ET9000 Image v2.1 - 05/03/2011 Enigma: 04-03-2011. Enigma Plugins: 04-03-2011. GCC Version: 4.4.4. Drivers: 20110214. Team ViX Enchancements ViX Bootlogos, Radio Logos. ViX Team Spinner. ViX Team Vu_HD Skin. ViX Team softcam manager (softcams will need to be installed manually). ViX Team Cron Manager - Allows you to create cron jobs from scrips in /usr/script/ and set them to run at pre-defined times by you. For more info, look at the screen shots below. ViX Team Power Manager - This allows you to enable standby at a specific time, enable deep standby at specific times, do a GUI restart at specific times, or do a full reboot at specific times. For more info, look at the screenshots below. ViX Team Device Manager - This enables you to choose where you want to mount USB Sticks, USB HDDs, etc. This can be found in Menu -> Setup -> VIX -> Device Manager. Please also note that USB / ESATA devices NEED there mount points setup in Device Manager (green button whilst in Device Manager) in order for them to work correctly. ViX Team Image Manager - This enables you to backup and restore your image (nb, we are talking the whole image, not just settings). This can be found in Menu -> Setup -> ViX -> Image Manager. You can choose where to store your backups to, either HDD or USB. /media/hdd/imagebackups or /media/usb/imagebackups folder (setup by pressing menu, whilst your in Image Manager). ViX Team Overscan fix - This is the fix to remedy any overscan people had in the previous release. To use this, go to Menu -> Setup -> VIX -> Skin Settings and alter the "Menu Overscan amount" to suit your display. ViX Team Swap Manager - Allows you to create/use swap files on usb/hdd, and also allows you to use swap partitions. ViX-EPG - This is a simpler, faster version of CoolTVGuide, modified for the image. ViX QuickEPG - This is VIXs' version of QuickZap. You can see the full epg data for the channel, not just now and next. Picons work within QuickEPG. Also includes channel preview. ViX Quick Event Info - This is the new way to receive the event info on the ViX image. Press OK button once to get the info bar up, press it once more (i.e. a second time) to receive the information about what is currently showing... ViX Single EPG (with channel preview) - The is new and unique to vix, after you open the ViX single EPG (short RED) you can view the 7 day epg for that channel, now to see another channels epg, either use the Channel up/down buttons on your remote or just key in the channel number. if you want to preview the channel your currently viewing the EPG for (ie you want to see what the current program is like) just press 'OK' on your remote, this will change to that channel showing you the program in the small video window. if you don't like it, go find another channel to preview by keying in new channel number (or up/down buttons). or if you do like it and want to go fullscreen on it, just press 'OK' again. but if you feel you want to return to the original channel you where watching (whilst still in ViX Single EPG) just press 'EXIT" button, this will return to where you where before you entered ViX Single EPG) ViX Network Manager added to VIX Menu - This allows you to stop and start certain network features. The features you can stop/start are: FTP, NFS, VPN, Samba and Telnet. USB DTT - To install dvb-t, you just need to go to the plugins downloads, and select the stick you have. This will then install the drivers for your stick. You will then need to restart your receiver. Once restarted, go to Menu -> Setup -> Service Starting -> Tuner Config, and you should notice Tuner C as your USB DTT... IPK Installer - Just copy your .ipk fle into '/tmp' and go to the menu option. AutoTimer plugin integrated into image - Create an AutoTimer (Series Link), using Blue button in Current Channel EPG info. XMLTV EPG Importer - Thanks to Rytec for his support on this Importer. This has been updated so that the Import automatically updates itself from the servers, so there is no need to download and install new source files. Thanks to Rytec for the idea and andyblac for coding it. CrossEPG included in image as default - Settings for this can be found in Menu -> Setup -> VIX -> CrossEPG. EPG Download from transponders - This incorporates the EIT, MHW, FREESAT, NetMed & VIASAT downloads. To enable/disable, change your settings in the Menu -> Setup -> System -> Customise. EPG load patch - Image patched to allow EPG data to be loaded without the need for a restart. WebInterface and Help Screens - The Web Interface Remote Control correctly shows the ET9000 remote control, with all buttons mapped correctly. As well as this, in all Help screens, the remote control has been updated to the ET9000, and all references of Dreambox removed. Added option to disable the spinner (egg timer) - Change the setting of "Show Animation while busy" in Menu -> Setup -> System -> Customise. Added option to disable the channel numbers in Channel List - BMCC bouquet's have Channel Numbers in their channel name, so you get them twice in channel list. Panic Button - Added option to enable/disable panic button (goes direct to channel 1). Subserivice Option - This option allows you to assign the Subservice shortcut to a long green press. To change this option, go to VIX Menu -> VIX Setup. Option to disable ViX coloured buttons - This should ensure that if users want to use MultiQuick button plugin, it should work without issue Added Wireless Lan Support - This is automatically enabled in the image. To set up, use the Network manager on first boot, or from the Menu -> Setup -> System -> Network. NFS Server added to image and set to run automatically - To edit the folders you wish to share, you will need to edit file /etc/exports. Network Browser - Added Network Browser to help you setup share mounts. OpenVPN Support - This will need to be configured to your need first then use the manager to setup to autostart. Added Smargo Support - This is automatically enabled in image. Recorded Items - Recorded Items list modified to move item, browse directories, etc. Works similarly to suomipoeka plugin. Can be selected to load via the recorded items button, or from the tv button. Permanent Timeshift Plugin integrated (Disabled by default, turn on via Timeshift settings). Integrated AutoTimer Integrated EPG Search Integrated IMDb Search Button Mappings Short Red** & *** - Show current channel EPG info (ViX Single EPG). Long Red*** - Show current event. Short Green** & *** - Timers. Long Green*** - AutoTimer Timers. Short Yellow*** - EPG Search. Long Yellow*** - IMDB Database. Short Blue - Extensions. Long Blue*** - Plugins Menu. EPG - Opens ViX EPG. Left/Right** - Opens ViX QuickEPG. ** Can be changed in ViX Menu *** Can be turned off in ViX Menu Known Bugs None that we know of Special thanks to the following members: vu+nl for skinning his magic skins for ViX Team image rytec - for his continued support. PLi Team for their great base image and allowing us to use it. zoka.cc for his Picon sets Coolman and all other developers for their plugins used in the feeds of this image. All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working [hideguest]ViX-2.1-et9000_usb[/hideguest]
kladovchk: Нашёл первые высказывания о CTech ET9000: Сообщение от volk2003: попробовал СlarkTech ET9000 в исполнении Xtrend. Впечатления самые лучшие. Скорость отработки нажатия на пульт - просто супер. Со скином Infiniti, смотрится супер. Такого я еще не видел. Дрим 800 рядом не стоял, Дрим 8000 отдыхает, VU + дуэт наврядли когдато догонит. Короче - оценка 4 + из пяти. (Недостаток - не пишет кириллицей на морде) Сообщение от krycek: Гоняю аппарат третьи сутки, впечатления исключительно восторженные! Как говорится, полный фарш, и это при цене на 40 евро меньше DM800SE. Навязшие в зубах разговоры про "убийц дрима" наконец материализовались ;)
kladovchk: ET9000_MultiMediathek-v1.0 the following libraries are available: 1. ARD media library 2. ZDF media library 3. Apple Movie Trailer 4. NASA.xv 5. Bild.xe 6. Trailer MovieMaze.xe 7. 4Players.xe 8. Clipfish.xe 9. Youp * rn * * (press the menu button remote on / in the plugin) must be back in the plugin settings are enabled Show Adult Content = Yes (or hold out / hidden) are Installation: -unzip the file "multi-media library v1.0.rar" -delete the folder "multimedia library"with your fav program, for example, DCC, ET9000CC, etc. via FTP for ET9000 in the directory below and paste it there, navigate to the folder multimedia library / copy: / usr/lib/enigma2/python/Plugins/Extensions then the ET9000 restart / boot .... Now is the multi-media library plugin V1.0 in the browser plugin for selection ... [hideguest]MultiMediathek-v1.0[/hideguest] Myvideo plugin - Then the enigma2-plugin-extensions-myvideo_0.1 r3_mipsel.ipk copy-on, for example, USB flash drive - USB flash drive into the ET9000 (please only in TV mode / no menu, etc.) and just wait until you become the "ipkginstaller" asked what will be installed to choose from ..... with the "ok" button and select the Install button green - then reboot / restart enigma [hideguest]Myvideo plugin[/hideguest] SatAngels KeyUpdater E2 v1.4 Ver. 1.4 06.02.2011 - Исправления для ET9000, DM800SE [hideguest]SatAngels KeyUpdater E2 v1.4[/hideguest] http://www.youtube.com/watch?v=C68aK9Sr2FA&feature=player_embedded
kladovchk: ET9000_MultiMediathek-v1.3_ (auto_online_update_funktion) Enigma2-плагинов-расширений-multimediathek_1.3_mipsel.ipk с автоматического обновления (последней версии) в начале плагины flvstreamer_2.1a-r0_mipsel.ipk Последнюю версию *. FLV стримера _____________________________________________ 1 ARD медиа-библиотеку 2 BBC библиотеки 3 Apple Movie Trailer 4 НАСА .* V 5 Picture .* E 6 Трейлер 7 4Players .* E 8 клипов Рыба .* E 9 YouTube * 10 YouPxrn ** Версия 1.8 [03.12.2011] Изменения: Улучшена обработка ошибок и сообщения об ошибках для кэшированных воспроизведения. Изменения: Показать название фильма, а не файла в информации бар при использовании кэшированных воспроизведения. Исправление: Исправлена временные файлы получении хранится в /home/root instead /mediathek/tmp папку иногда при использовании кэшированных воспроизведения. ** = настройках плагина включена, взрослый контент (пресс-клавишу меню плагинов) [hideguest]enigma2-plugin-extensions-multimediathek_1.3_mipsel.rar [/hideguest] ----------------------------------------------------------------- INFO: -SHOUTcast genre fix [hideguest]enigma2-plugin-extensions-shoutcast_r.2.2_mipsel.rar [/hideguest]
kladovchk: Drivers Update 2011-03-14 Список изменений: ЦИК поддержки отправки команд, когда телевизор находится в режиме ожидания Отключить-LNB мощность в режиме ожидания -Исправлена LNB loopthrough в режиме ожидания Увеличение напряжения поддержки LNB Исправлена замораживания пип-пункт при переключении / главный экран -Исправлено переключение с 24p в режиме 25p Linuxtv DVR-поддержка устройства (/ Dev / разное / PVR-прежнему доступен для обратной совместимости) Mp3-фиксированной EndOfFile обнаружения Hd-IFRAME 'пункт' (скриншоты будет показан) Changelog: -support sending CEC commands when the tv is in standby -disable lnb power in standby -fixed lnb loopthrough in standby -support increased lnb voltage -fixed pip freeze when switching pip/main screen -fixed switching from 24p to 25p mode -support linuxtv dvr device (/dev/misc/pvr is still available for backward compatibility) -fixed mp3 endoffile detection -hd iframe 'pip' (Screenshots will be shown) et9000-drivers-gcc44-20110314.zip заменить и просвоить права (755) : /lib/modules/2.6.18-7.4/extra вы можете с помощью Telnet, введя: [edit]opkg install et9000-dvb-modules[/edit]
kladovchk: Clarke-Tech official Support Image ET9000 Enigma: 17-03-2011 Enigma Plugins: 17-03-2011 GCC Version: 4.4.4 Drivers: 20110214 Clarke-Tech Enhancements for the completely modular Image - Clarke-Tech HD Lava Skin - Clarke-Tech Bootlogos and Radio Logo - Clarke-Tech Panel (available with Multilanguagesupport - English / German) Please see attached Screenshoots for a short overview of all Parameters - Best Sysinfopanel (Complete Overview of Systemparameters) - HDMI-CEC Support via Plugin (you have to upload drivers from 20110314 to switch your TV on, if its CEC-capable) - Sundtek USB-DVB/C/T/S2 Support - WLAN fixes and Support for 80211b/g/n Ralink based USB-Dongles (RT73 and RT3070) RT3070 support needs first to be switched on in CTPanel -> Systemtools -> Kernelmodules - Running "broken" Shellscript (as Cronjobs) will work - Acousticpatch (needs a HDD that supports acoustic parameter consult HDD manufacturer for this) Plugins added - AutoResolution (disabled by Default) - CrossEPG (disabled by Default) - CoolTVGuide - DVDPlayer Specialized version of Multiquickbutton for Clarke-Tech ET9000 To make use of all extra buttons on Remotecontrol and several new World-exclusive Features like the 3D-Mode Button. You can also (re)-assign the buttons mentioned completely by yourself. See Button Mappings for further details. Button Mappings: Red Short: Instant record Long: Record Selection Green Short: Subservice Selection Long: Open Plugin Browser Yellow (Wold exclusive) Short: 3D Mode Selection (Side-by-side) Long: Choicebox for 3D-Mode Top and Bottom and Switch 4:3 (Pillarbox) (Pan and Scan) Blue Short: Open Clarke-Tech CTPanel Long: Open InfoBar Extension Selection Channel up/Down Button: Assigned to work as labeled on Remote Control Cross left: Bouqetlist Cross right: Open servicelist Cross up: Listchannelzap + Cross down: Listchannelzap - Timer Button: Short Timer Long Timereditor Playlist Button Short: Mediaplayer Long: DVDPlayer Filelist Open Recorded Movielist Search Button Short: CoolTVGuide Mark Button Short: Dolby Digital Downmix on/off Guide Button Short: InfoBar EventView Long: Graphical Multi EPG ########################## Known Bugs: RAW Audio-CD Playback DVD-Playback DTS-Downmix Special thanks to the following people: Andreas Nobel aka scope34 (Main Developer) clarkemaster (Skin & Graphics) For all further credits see About Screen in CTPanel -> Systeminfo ############### ClarkeSupport изображения должны быть установлены в Flash. ClarkeSupport изображения не будут поддерживаться, если не установлен флэш-память. Нет Мультизагрузочный поддержки. Не поддерживается, не хотел. DISCLAIMER: Это официальный Кларк-Tech Изображение опубликовано ClarkeSupport И В СООТВЕТСТВИИ С ЗАКОНОДАТЕЛЬСТВОМ он содержит только СИСТЕМЫ ДОПОЛНЕНИЯ И ИЗМЕНЕНИЯ ГРАФИКА. CLARKESUPPORT изображение не содержит любой эмулятор, ключи, SOFTCAMS или другой системы ДЛЯ ПРОСМОТРА платного ТВ с или без платной подписки. Наконец,CLARKESUPPORT изображение не содержит ни одного канала СКАЧАТЬ плагинов или эмуляторов с внешних серверов или программного обеспечения, может быть использован для незаконных целей, ТАКИЕ КАК КАРТЫ ОБМЕН. ЛИЦЕНЗИИ (срок ЕГЭ)CLARKESUPPORT IMAGE выдается бесплатно использовать для всех пользователям, при условии, что оно не будет изменено КАКИМ-ЛИБО ОБРАЗОМ и что он будет использоваться только в законных целях. Любые изменения и дополнения К CLARKESUPPORT IMAGE, которые включают незаконное использование изображения, такие как карта-шеринговых и эмуляторы не допускаются и Причина REVOKE ЛИЦЕНЗИИ [hideguest]ClarkeSupport-20110317_usb.zip [/hideguest]
kladovchk: SifTeam Enigma2 Gecko Edition (Azbox-Cteck et9000-Dreambox-Vuduo) New Settings Loader Plugin With this plugin you can download Settings Directly from major settings creators,like Morpheus,Cyrus without lost your Dtt channel list Added possibility to install manual settings directly from zip/tar.gz/ipk file Many thanks to Morpheus883 and Cyrussettings.com for joined the project. Other settings makers are welcome New Lcn Scanner Plugin Totally Rewritten Reorder channels with national lcn list Use it after a standard dtt scan on enigma2 service searching If you enable "Italy" option lcn scanner will order your channel better with categories divisor,(if you want this option for other country just send a correct lcn xml file ) New SifPanel System Now you can personalize your panel like you want.Just add or remove the parameters that you use often. New Software Manager Now before installing plugin or skin,you can see a preview with some screenshoots New Default Black Skin (see screenshoots) Autodetect usb dtt Drivers (see forum for the list) Autodetect usb wifi drivers (see forum for the list) Fixed rt2870 \ rt3070 \ rtl8187l \ Added Sm*rgo Support Many Thanks To : Skaman (Developer & Coder ) Bobsilvio (Coder) Ipbox2008 (Coder) Margy82 (Skinner) Cus2k (Betatester) Barrett (Betatester) Katapip (Betatester) Morpheus883 (Settings Master Chief & Betatester) Raskino (Betaster) Ukiller_Bestia (Web Master and Server Manteiner) Theseven (Betaster) Tideglo (Cuberevo Drivers e2 Developer) Ngc1927 (Dgs Firmwares Developer) Genge (Manager) Biondo79 (Betatester) and all people that everyday support sifteam forum [hideguest]openee-gecko-image-et9000-20110319003802.zip [/hideguest]
kladovchk: Clarke-Tech official Support Image V 1.1 ClarkeSupport Image Bugfix Minor-Release v1.1 Enigma2.7 from 27.03.2011 Enigma Plugins: 27-03-2011 GCC Version: 4.4.4 Drivers are updated to 22.03.2011 Bugfixes: - WLAN Fix for rt3070 - Bugfix for WinTV Nova Panel (don't crash anymore when using WinTV Nova USBTuner Panel) Also supports complete removal of all dependencies (used Drivers etc.) when turn off additional (third) USB DVB-T Tuner. New Features: - PiP Key is now enabled to support the following actions: - Short Activate/Deactivate PiP - Long press action: Choice between PiP Toggle Zap or PiP Setup, all others PiP-Actions can also be assigned to RC-Keys. Use Linux API DVR-Device, please do not Upgrade Enigma2.7 until we give you an offical annoucement. - Prepared for NFS-Server and OpenVPN Support - Supports NTP-Client/Servermode turn off using Enigma2 Transpondertime for exclusive use - Further shrink down Imagesize about 0,3 MB to speed up things. Known Bugs: RAW Audio-CD Playback DVD-Playback DTS-Downmix Clarke-Tech Enhancements for the completely modular Image - Clarke-Tech HD Lava Skin - Clarke-Tech Bootlogos and Radio Logo - Clarke-Tech Panel (available with Multilanguagesupport - English / German) Please see attached Screenshoots for a short overview of all Parameters - Best Sysinfopanel (Complete Overview of Systemparameters) - HDMI-CEC Support via Plugin (you have to upload drivers from 20110314 to switch your TV on, if its CEC-capable) - Sundtek USB-DVB/C/T/S2 Support - WLAN fixes and Support for 80211b/g/n Ralink based USB-Dongles (RT73 and RT3070) RT3070 support needs first to be switched on in CTPanel -> Systemtools -> Kernelmodules - Running "broken" Shellscript (as Cronjobs) will work - Acousticpatch (needs a HDD that supports acoustic parameter consult HDD manufacturer for this) Plugins added - AutoResolution (disabled by Default) - CrossEPG (disabled by Default) - CoolTVGuide - DVDPlayer Specialized version of Multiquickbutton for Clarke-Tech ET9000 To make use of all extra buttons on Remotecontrol and several new World-exclusive Features like the 3D-Mode Button. You can also (re)-assign the buttons mentioned completely by yourself. See Button Mappings for further details. Button Mappings: Red Short: Instant record Long: Record Selection Green Short: Subservice Selection Long: Open Plugin Browser Yellow (Wold exclusive) Short: 3D Mode Selection (Side-by-side) Long: Choicebox for 3D-Mode Top and Bottom and Switch 4:3 (Pillarbox) (Pan and Scan) Blue Short: Open Clarke-Tech CTPanel Long: Open InfoBar Extension Selection Channel up/Down Button: Assigned to work as labeled on Remote Control Cross left: Bouqetlist Cross right: Open servicelist Cross up: Listchannelzap + Cross down: Listchannelzap - Timer Button: Short Timer Long Timereditor Playlist Button Short: Mediaplayer Long: DVDPlayer Filelist Open Recorded Movielist Search Button Short: CoolTVGuide Mark Button Short: Dolby Digital Downmix on/off Guide Button Short: InfoBar EventView Long: Graphical Multi EPG ########################## Known Bugs: RAW Audio-CD Playback DVD-Playback DTS-Downmix Special thanks to the following people: Andreas Nobel aka scope34 (Main Developer) clarkemaster (Skin & Graphics) For all further credits see About Screen in CTPanel -> Systeminfo ################################################## ####### Using CT Image components on other STBs not being Clarke-Tech is not permitted. If you do so you break copyright terms and you are getting in conflict with law. The ClarkeSupport Image have to be installed in flash. ClarkeSupport Image won't be supported if not being installed in flash memory. No Multiboot Support. Not supported, not wanted. DISCLAIMER: This is the official Clarke-Tech Image published by ClarkeSupport AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES. THE CLARKESUPPORT IMAGE DOES NOT CONTAIN ANY EMULATOR, K**s, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY-TV WITH OR WITHOUT A PAID SUBSCRIPTION. LASTLY, THE CLARKESUPPORT IMAGE DOES NOT CONTAIN ANY FEEDS TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING. LICENSE (TERM OF USE) THE CLARKESUPPORT IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES. ANY CHANGES OR ADDITIONS TO CLARKESUPPORT IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REVOKE OF THIS LICENSE [hideguest]Clarke-Tech-Support-v1.1-20110327_usb.zip Новые драйвера обновления: Исправлена ошибка записи. распаковать ,заменить: lib/modules/2.6.18-7.4/extra / , затем перезагрузить het9000-drivers-gcc44-20110322.zip [/hideguest]
kladovchk: SifTeam Enigma2 cteck et9000 Gecko Edition - 29\03\2011 Описание: Enigma 2 версии: Gecko-git20110603-R28 Списков изменений: Enigma2: Нет изменений -------------------------------------------------- -------------------------------------- Enigma2 плагины: Нет изменений -------------------------------------------------- -------------------------------------- Ваши добавления: 2011-01-26 Fraxinas <andreas.frisch@multimedia-labs.de> * [Автоопределения-нг] CVS обновления SRC даты (исправляет ошибку # 399) . 224a 2011-01-28 Fraxinas <andreas.frisch@multimedia-labs.de> * [Libdreamdvd] srcdate обновления, обеспечивает прямой аудио-и поток субтитров Выбор (требуется # # 440, 441) . 199a 2011-02-05 призрак <andreas.monzner@multimedia-labs.de> * Перейти на Git, обновление srcdate / srcref исправить dm7020hd поддержки . 194a 2011-02-06 Андреас Oberritter <obi@opendreambox.org> * OpenSSL-native_0.9.8j: построить исправление для x86_64 2011-02-06 skaman <skaman@users.sourceforge.net> . 191А 2011-02-05 Андреас Oberritter <obi@opendreambox.org> * Позволяют devfsd на DM7025 2011-02-06 Андреас Oberritter <obi@opendreambox.org> * Linux-DM7025: построить исправления для Ubuntu 11,04 / x86_64 . 186a 2011-02-08 Андреас Oberritter <obi@opendreambox.org> * Opkg: не трогайте / USR / Lib / opkg / альтернатив по установке * Minicom: построить исправления для Ubuntu 11,04 / x86_64 * MC-4.6.2: создание исправления для Ubuntu 11,04 / x86_64 2011-02-07 Андреас Oberritter <obi@opendreambox.org> * Удалить из cp437 задачу загрузки * Linux: включить кодировку 437, чтобы иметь возможность загружаться с FAT * DM7025: вопрос HDPARM-D1 после установки DMA Mode * Zeroconf: набор резервных = да * Opkg: исправить перехвата звонков depmod . 184А 2011-02-08 Андреас Oberritter <obi@opendreambox.org> * Update-альтернатив: не трогайте / USR / Lib / opkg / альтернатив по установке 2011-02-08 skaman <skaman@users.sourceforge.net> . 176a 2011-02-10 призрак <andreas.monzner@multimedia-labs.de> * Gstreamer_0.10.32.bb: добавить GST-плагин-селектор в RREPLACES и RCONFLICTS .. потому что он был перенесен из GST-плагины-плохо GStreamer основных теперь * Enigma2.bb: обновление 20110210 и определить Git srcref удалены не более существующих GST-плагин-селектор * Checksums.ini: добавить сумм для GStreamer / GST-плагины-базы 0.10.32, GST-плагины-плохо 0.10.21, GST-плагины-уродливые 0.10.17 и GST-плагины-хорошие 0.10.27 * GST-плагины-good_0.10.27.bb: исправить PR, очистки * GST-плагины-bad_0.10.21.bb: исправить PR * GST-plugins.inc: множество INC_PR до 0 из-за GStreamer и плагины обновления * GST-плагин-dvbmediasink: обновление 20110210 * Enigma2-плагинов: обновление 20110210 и определить Git srcref * Enigma2-skins.bb: обновление шкуры 20110128 и определить srcref для Git 2011-02-10 Fraxinas <andreas.frisch@multimedia-labs.de> * [GStreamer] перейти на последние релизы 2011-02-10 призрак <andreas.monzner@multimedia-labs.de> * Linux-DM8000: добавить драйвер NAND Flash исправить (это фиксирует mtd/jffs2 ошибка ECC сообщений в ядро журнала) . 173a 2011-02-11 призрак <andreas.monzner@multimedia-labs.de> * Enigma2.bb: исправить опечатку (SRCREF -> SRCREV) 2011-02-11 skaman <skaman@users.sourceforge.net> . 125A 2011-02-16 призрак <andreas.monzner@multimedia-labs.de> * Dreambox-DVB-modules.bb: обновление аппаратного dm800/dm8000/dm500hd/dm800se Драйверы все --- - добавить поддержку двух vtuners - использование API linuxtv устройства DVR вместо проприетарных устройств PVR (ы) .. Это позже необходимые для лучшего TS Поддержка потокового - небольшие исправления ПЦР - Исправлена ошибка демультиплексированием предотвращения пакетов от предыдущих запущенный сервис в записанных TS потоки dm800se/dm500hd: - Обновлено аудио / видео декодер, видео выход, демультиплексоры и выход HDMI код DM8000: - Обновлен декодер видео, видео-выход, демультиплексоры и выход HDMI код заботиться Этот драйвер обновления требуется по меньшей мере 2-й этап погрузчик # 81 . 118a 2011-02-16 призрак <andreas.monzner@multimedia-labs.de> * Recipes/udev/udev-124: добавить vtuner1 устройства к 41-ОД-Linux-2.6.18-misc.rules и удалить PVR устройство * Checksums.ini: обновление secondstage-DM7025-81.bin контрольной * Dreambox-DVB-modules.bb: добавить недостающие драйвера изменения даты * Enigma2.bb: Push srcrev для последних версий драйверов Dreambox, добавить 7025 совместимость изменений, удаления неиспользуемых сравнении * Enigma2-plugins.bb: Push srcrev (необходимы новые драйверы HW Dreambox) 2011-02-15 призрак <andreas.monzner@multimedia-labs.de> * Dreambox-DVB-Сервис-v3.bb: средство обновления showiframe (перейти к неблоковых режиме) необходимые Dreambox-DVB-модулей> = 20110215 2011-02-16 призрак <andreas.monzner@multimedia-labs.de> * Dreambox-secondstage.bb: обновление dm7025/dm800/dm8000/dm800se/dm500hd второй перегружателя на # 81 - Некоторые USB стека исправления и улучшения - Изменено Mem макет для dm800se/dm8000/dm500hd драйверами> = 20110215 - некоторые HTML решения необходимы для современных веб-браузерах (например, фиксированная неэффективными "Flash" кнопка) - Исправлена часто dm500hd PowerOn проблемы - Исправлены возможные Ethernet проблемы обновления writenfi инструмент для исправления secondstage на лету обновления на DM8000 . 114А 2011-02-17 призрак <andreas.monzner@multimedia-labs.de> * Удалено ядро-модулей-NLS-iso8859-1 от MACHINE_ESSENTIAL_EXTRA_RDEPENDS .. его теперь непосредственно включены в ядро * Enigma2: фиксированная воспроизведения TS 7025 * Лучшей управляемости для Dreambox-транзитной пересылки .. * Двигаться libebml и libmatroska контрольные суммы для checksums.ini * Удалить старый (не работает) libmatroska и libebml 2010-10-01 Андреас Oberritter <obi@opendreambox.org> * Lib {EBML, Matroska} -1.0.0: intitial рецепты 2011-02-17 Андреас Oberritter <obi@opendreambox.org> * Linux-дм *: построить ISO8859-1 в ядро и выбрать его по умолчанию для NLS наконец, исправить FAT устанавливается на загрузку 2011-02-16 призрак <andreas.monzner@multimedia-labs.de> * Recipes/enigma2: удалить более не используется enigma2.sh, нажмите srcrev * Enigma2: использование libpassthrough при наличии, нажмите srcrev исправить radiomode * Добавить Dreambox-libpassthrough для поддержки DTS-HD -> DTS преобразования для сквозного (для TS/M2TS) . 106а 2011-02-26 Андреас Oberritter <obi@opendreambox.org> * Secondstage: исправить do_stage за 7025, консолидации функций 2011-02-25 Андреас Oberritter <obi@opendreambox.org> * Обновление secondstage на # 82, обновления bootlogo.elf до # 7 . 101а 2011-02-28 Андреас Oberritter <obi@opendreambox.org> * Secondstage: Используйте PV вместо PV_mipsel, потому что ОБЩИХ следует обратное Логика в этом OE версия * Secondstage-DM7025: исправить заморозить до загрузки ядра (# 83) . 96а 2011-03-02 призрак <andreas.monzner@multimedia-labs.de> * Dreambox-DVB-modules.bb: обновление аппаратного dm800/dm800se/dm500hd/dm8000 Драйверы - реентерабельности исправления в демультиплексированием и видео / аудио режиме клипа (фиксированная Часто ядро ой) - исправлена не видно вариантов ПКП на DM8000 - вернуться к предыдущий видеовыход, HDMI и видео декодер кода (DM500HD/DM800SE/DM8000) Это должно исправить некоторые проблемы, созданные с 20110215 драйверов - добавил ПЦР / HDMI отладки ядра выводить сообщения для отладки HDMI проблемы (DM800) 2011-03-02 Андреас Oberritter <obi@opendreambox.org> * Bootlogo: обновление # 8 2011-03-01 Андреас Oberritter <obi@opendreambox.org> * Secondstage-dm500hd: отображение IP-адреса на светодиодном (# 83) . 90А 2011-03-04 Андреас Oberritter <obi@opendreambox.org> * Добавить драйвер для Realtek 802.11n USB-контроллеры беспроводной локальной сети . 68а 2011-03-08 Андреас Oberritter <obi@opendreambox.org> * AutoFS: увеличение тайм-аута от 1 до 5 секунд (работах # 694) . 58а 2011-03-08 Андреас Oberritter <obi@opendreambox.org> * Задача-opendreambox-WLAN: построить и предложить USB модули WLAN на DM8000 * BusyBox: Включить mkfs.vfat * Задача-opendreambox-*: исправить ЗАВИСИТ . 53а 2011-03-09 призрак <andreas.monzner@multimedia-labs.de> * Dreambox-DVB-modules.bb: обновление аппаратного dm800/dm800se/dm500hd/dm8000 водителей 20110309 - работал на DM800 HDMI соединение потеряно проблема - исправлена средняя нагрузка расчет еще раз (закрыта с 20110302 драйверов) - работал на h264 буфера сгущенного проблемы на некоторых H264 услуги 2011-03-09 Андреас Oberritter <obi@opendreambox.org> * AutoFS-4.1.4: удар PR (исправляет 607126c04ef908f0f7bfb1c46cd72d6a2ad7a277) 2011-03-09 skaman <skaman@users.sourceforge.net> . 22а 2011-03-15 призрак <andreas.monzner@multimedia-labs.de> * Dreambox-DVB-modules.bb: обновление DM8000 драйверы оборудования - фиксированные ЛЕФ / вправо Переключение звуковых каналов через HDMI (закрыта с 20110302 драйверов) . 5а 2011-03-18 Младен <acid-burn@opendreambox.org> Хорват * NetBase: исправить нерабочий обнаружения wpa_supplicant в сети перезагрузки. Толчок PR. работах # 724 . 0a 2011-03-27 skaman <skaman@users.sourceforge.net> * Исправлена СНОВА libdvdcss2 зависит 2011-03-26 skaman <skaman@users.sourceforge.net> * Добавлена libdvdcss2 зависит 2011-03-24 <bobsilvio@users.sourceforge.net> Bobsilvio * Обновление usbloader новые опции dib0700 2011-03-23 skaman <skaman@users.sourceforge.net> * Обновлено et9000 драйверов (20110322) 2011-03-22 skaman <skaman@users.sourceforge.net> * Убрано последнее opkg патчи от DMM * Убрана svdownloader * Увеличение Enigma2 PR (пропущенные в последнего слияния) * Исправлен сломанной v4l-DVB-compat.patch 2011-03-21 skaman <skaman@users.sourceforge.net> * Обновлено v4l-DVB SRCREV * Увеличение PR в Enigma2 задачи * Добавлена et9000, bm750 и vuplus контрольных сумм * Добавлена libdvdcss2 как зависимость в DVDPlayer задачи * Обновлено bm750 и vusolo драйверов (20110321) * Увеличение bootlogo PR (требуется от последнего слияния с DMM) * Обновлено et9000 драйверов (20110319) * Исправлена ядро-модуль-NLS-iso8859-1 зависимости от последнего слияния -------------------------------------------------- -------------------------------------- Libsif: Нет изменений -------------------------------------------------- -------------------------------------- Opkg: Нет изменений -------------------------------------------------- -------------------------------------- Extuner: Нет изменений -------------------------------------------------- -------------------------------------- Usbloader: 2011-03-24 <bobsilvio@users.sourceforge.net> Bobsilvio * Добавлена опция force_lna_activation = 1 для водителя dib0700 -------------------------------------------------- -------------------------------------- Lcnscanner: Нет изменений -------------------------------------------------- -------------------------------------- [hideguest]openee-gecko-image-et9000-20110329102702.zip [/hideguest]
kladovchk: Drivers 2011-04-09 Changelog: -smartcard interface improvements -media playback improvements -AC3+/DDP support (use AUDIO_SET_BYPASS_MODE 0x22) -vtuner: DVB-S2 support -increased default alsa volume (pcm playback) [hideguest]et9000-drivers-gcc44-20110409.zip [/hideguest]
kladovchk: VIX Team ET-9000 v2.1 Backup Image First, a new image to the usb install the latest version of cihazımıza: ET 9000 Software Installation (with USB) After installation to be done after the installation settings:: ET 9000 Initial Installation Settings Seзilidi HDMI. 1080i is selected. Turkish language was chosen. DHCP on the network. At the point where you can search the channel or canal Stock List can install this. If you want to call before you'll need to channel tuner settings. ET 9000 Tuner configuration For this review the following topic: ET 9000 Channel Search Works We check the setting network. Menu> Setup> System> Network in the "Network hardware settings" kumandamızın point to the "OK" button. Under the section for the current settings by getting the IP address of shout. (Channel settings when you install will have to get back the value of the rope.) Now you can install Channel Settingimizi. ET 9000 Channel & favorite Regulatory Operations, Ready-Channel List Load Twin VU + Duo & Solo & Xtrend ET-9000 HDTV Channel Setting 07-04-2011 (@ galaxy2002) Channel setting is loaded. Do not forget to reboot after installing the device channel settings. Menu> Setup> Satellite configuration> Tuner Tuner settings: Settings section to come. Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 ° Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 ° Note: Notice that after you install the tuner ayarlamızı have made our list before the channel. Thus, due to the possible setting names of different satellites have prevented errors in the satellite broadcasting can be taken. Menu => Add-ons => Green Button (Download Extension) a pressed. Extension information indiriliyor.Lьtfen wait ... Plug-ins will be seen after a period of warning in case of Categories. The downloadable add-ons => systemplugins autoresolution established under The downloadable add-ons => systemplugins established under the setpasswd. The downloadable add-ons => under extensions permanentclock The downloadable add-ons => simplerss established under extensions The downloadable add-ons => virtualzap established under extensions The downloadable add-ons => vlcplayer established under extensions The downloadable add-ons => weatherplugin established under extensions Emu are doing the installation: wixcam.rar file included in the download folder "enigma2-plugin-cams-cccam.2.2.1_mipsel.ipk" file via ftp device, / tmp folder are sending below. Menu> Setup> VIX> IPK installer to come and "enigma2-plugin-cams-cccam.2.2.1_mipsel.ipk" We see the file. Kumandamızın the OK button (or pressing the green button kumandamızdaki) by pressing the yes on the question while we do the installation by pressing the OK button kumandamızın. Re-confirm başlatmayıda. Enigma2-plugin-cams in the same way that we do-mgcamd.1.35a_1.0-r3_mipsel.ipk installation. mg_cfg file: / usr / send keys under. Cccam.cfg file / etc folder is located. This file server uses the inside of our knowledge is required. CCcam 2.2.1 Established | Established 1.3.5a Mgcamd | Bulsat Patch For File loaded. Patch File for Bulsat Load: Patched by pinkyto0o Bulsatcom mgcamd_1.35a would remove enigma2 download and unzip. Unzip the folder in the extracted mgcamd_1.35a file via ftp / usr / softcams taking the bottom. making the value of chmod 755. Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do. To set up Hacksat telnette Export MALLOC_CHECK_ = 0 opkg install-force-overwrite / tmp / Hacksat * give the command. When you want to install plugins as external. Ipk file via ftp to / tmp after kicking Menu> Setup> VIX> IPK installer to come and we want to set up even though the file was selected Kumandamızın after seeing the OK button (or pressing the green button kumandamızdaki) by pressing the yes on the question while we do the installation by pressing the OK button kumandamızın. tunisiasat manager_3.0 download-addons-founded. WebMedia plugin was downloaded. (@ Niendorfer) Time Zone: (GMT +02:00) Athens, Istanbul, Minsk set-up service is started: Kanal D [hideguest] isayuksel_backup_vix_2_1_et_9000.zip [/hideguest]
kladovchk: new drivers 14-5-2011 There is a preannouncement about new drivers for the ET9000 Be carefull: Because the memory structure is changed the drivers will not work good in older build images. You have to wait till the drivers are available with the new build. The first test I made with the new drivers are very great. All media issues in driver seems to be fixed and it looks like through the AC3+ support it's one of the best E2 media box available. Blindscan is activated in the box and the scans seems very fast compare with other boxes. I don't know to much about feedhunting but so far I see it has very high potention!! Recording 7 different HD channels + PIP/Iframe HD + Timeshift is working without problems. [hideguest]et9000-drivers-gcc44-20110514.zip[/hideguest]
kladovchk: Sifteam E2 gecko r42 ET9000-2011.05.28 Description: Image version: gecko-20110528160307 Enigma2 version: gecko-git20110603-r42 Machine: et9000 File name: openee-gecko-image-et9000-20110528160307.zip MD5: 6af39e59859b51c084fc2c6da8c7154b update: default skin ; bootlogo ; driver Driver 15-05-2011 - Media playback improved - Xvid Fix - Rotor fine tune Fix [hideguest]openee-gecko-image-et9000-20110528[/hideguest] New Bootloader for ET9000 19.05.11 [hideguest]Bootloader et9000.rar[/hideguest]
kladovchk: Power of Dream HD+ Image for ET9000 [hideguest]podhd-et9000.zip[/hideguest]
kladovchk: HDF-Teamimage v3 05.06.2011 ET9000 HDF-Teamimage based on OpenPLi2.0 vom 05.06.2011 Clark-tech ET9000 Image v2 basierend wie immer auf dem bewährten PLi. Den Ordner et9000 auf einen USB-Stick entpacken, anstecken und den Receiver am Schalter neustarten. Entweder wird das Image im Display selber angeboten oder ihr müsst beim Starten die Menü Taste gedrückt halten. Nach dem Flashen wird automatisch ein Addon Pack installiert. Solange steht auf dem Bildschirm "First Boot please wait". Je nach Leitung dauert das einige Minuten. Also nicht ungeduldig werden oder abbrechen. Wenn die Box nicht am Internet hängt wird dieser Vorgang übersprungen. Das Firstboot Paket kann auch später noch in der HDF-Toolbox nachinstalliert werden. Im Firstboot Paket sind EMU's Picon's, Plugin's, Skin's enthalten. Hinweise zur Bedienung: Rot - Timer Editor Rot Lang - Bitrate Viewer Grün - Submenü Grün Lang - frei Gelb - Timeshift Gelb Lang - Mount Infos Blau - Erweiterungen Blau Lang - Zap-History Info - aktuelles Sender EPG Guide - Cool Multi Guide Info Lang - Zap History Exit - Virtual Zap mit PIP Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen vkey - Zugriff auf aufgenommene Filme EMUs und Softcams: Die Configs liegen unter /var/keys bzw. unter /etc. Changelog: - Treiber vom 16.05.2011 http://www.et-view.com/download/drivers/ - Änderungen OpenPLi 2.0 - Enigma2: http://openpli.git.sourceforge.net/git/gitweb.cgi?p=openpli/enigma2;a=shortlog - openembedded: http://openpli.git.sourceforge.net/git/gitweb.cgi?p=openpli/openembedded;a=shortlog - Plugins: http://openpli.git.sourceforge.net/git/gitweb.cgi?p=openpli/enigma2-plugins;a=shortlog [hideguest]et9000 hdfreaks.v3 PLi2.0 05062011.rar[/hideguest]
prekon: Так и не запустил этот имидж,HDF ! Бутлого стоит и всё. Если у кого пошло ,отпишитесь пож. А у BH - 1.43 кнопка Стэнбая не работает,надо keymap.xml добивать её.
kladovchk: HDF-Teamimage v3.1 11.06.2011 ET9000 HDF-Teamimage based on OpenPLi2.0 vom 11.06.2011 Clark-tech ET9000 Image v3 basierend wie immer auf dem bewährten PLi. Den Ordner et9000 auf einen USB-Stick entpacken, anstecken und den Receiver am Schalter neustarten. Entweder wird das Image im Display selber angeboten oder ihr müsst beim Starten die Menü Taste gedrückt halten. Wichtig!!! Aktueller Bootloader muss installiert sein. Bootloader im Anhang herunterladen und per USB-Stick wie ein Image installieren. Danke an janosch. Der Bootloader im Anhang ist der aktuelle Loader welche bis zu 100MB Flash unterstützt. Nach dem Flashen wird automatisch ein Addon Pack installiert. Solange steht auf dem Bildschirm "First Boot please wait". Je nach Leitung dauert das einige Minuten. Also nicht ungeduldig werden oder abbrechen. Wenn die Box nicht am Internet hängt wird dieser Vorgang übersprungen. Das Firstboot Paket kann auch später noch in der HDF-Toolbox nachinstalliert werden. Im Firstboot Paket sind EMU's Picon's, Plugin's, Skin's enthalten. Hinweise zur Bedienung: Rot - Timer Editor Rot Lang - Bitrate Viewer Grün - Submenü Grün Lang - frei Gelb - Timeshift Gelb Lang - Mount Infos Blau - Erweiterungen Blau Lang - Zap-History Info - aktuelles Sender EPG Guide - Cool Multi Guide Info Lang - Zap History Exit - Virtual Zap mit PIP Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen vkey - Zugriff auf aufgenommene Filme EMUs und Softcams: Die Configs liegen unter /var/keys bzw. unter /etc. Changelog: - Treiber vom 16.05.2011 http://www.et-view.com/download/drivers/ - Änderungen OpenPLi 2.0 - Enigma2: http://openpli.git.sourceforge.net/git/gitweb.cgi?p=openpli/enigma2;a=shortlog - openembedded: http://openpli.git.sourceforge.net/git/gitweb.cgi?p=openpli/openembedded;a=shortlog - Plugins: http://openpli.git.sourceforge.net/git/gitweb.cgi?p=openpli/enigma2-plugins;a=shortlog Update V3.1: - komplett aktualisiert Stand 11.06.2011 (Plugins, Enigma, Picons, Senderliste) - Cool TV Guide 4.0.0 - Im MultiQuickbutton können jetzt alle Tasten verwendet werden (soweit sinnvoll) - Fullimage mit ~85MB (neuer Bootloader ist Pflicht) - für Backup auf USB Stick vorher eine Datei "backupstick" auf dem Stick erstellen (Textdatei und umbenennen). [hideguest]et9000 hdfreaks.v3.1 PLi2.0 11062011[/hideguest]
kladovchk: ViX Team ET9000 Image v2.2 - 11/06/2011 New VIX Image ET9000 - v2.2 11/06/2011 - Open ViX 2.2 Based on Open PLi 2.0 Enigma: 11-06-2011. Enigma Plugins: 11-06-2011. GCC Version: 4.4.4. Drivers: 20110516. ViX is now embedded within the image even more. A lot of settings have been moved out of the ViX menus, and incorporated within the image. Settings from previous images may not be 100% compatible, and it might be best to re-setup your image without restoring system settings for 100% reliability. If you have previously used NetworkBrowser to mount network mounts, please remove '/etc/enigma2/automounts.xml' BEFORE tying to setup news ones. Team ViX Enchancements ViX Bootlogos, Radio Logo. ViX Team Spinner. ViX Team ViX_HD Skin. ViX Team softcam manager - Lots of changes have been made here. You can now choose whether you want to check whether your cams are running by pressing menu in the softcam screen. You can also check the status of your cam checks by pressing the info button. Also, lots of behind the scenes checks to ensure no restarts of cams when it is actually running. ViX Image Manager Update - This has been overhauled, and now has the option of creating a schedule to do daily, weekly or every 30 days backups for you. ViX Cron Manager Update - This has been updated to allow more detailed and specific cron jobs to be created. ViX Single EPG (with channel preview) - This has been updated to now support picons. ViX Release notes - This is just a little screen within the Menu -> Information -> About, that appears when you press EPG/Info button, to tell you the latest updates for the image. ViX Update Checker - This is a feature that lets you know of any available online updates by a little globe symbol in the infobar. This is set to check every 12 hours whether there are any updates for the image (can be changed in settings). If so, the icon will change from inactive to active... ViX Logs Manager - This allows you to manager your crashlogs and system logs (if enabled). If you have a crash, you can email your bugs to us directly from the image. Go to Menu -> Setup -> System -> Logs. When in the Logs Manager, you can edit the configuration to show your forum username, and your email address by pressing the Menu button. Please ensure you do this before submitting logs! ViX Settings - These are now found in the main System Menu. ViX Simple TV List - This is a simple selection to show your bouquet lists, just showing the channels and current event (if in EPG). To access the Simple TV List, do a long up/down arrow button press. You can customised it to be the default option instead of Full Screen Channel List, in which case, Up/Down buttons are reversed. It can also be set in the ViX Settings for the TV button. AutoTimer plugin integrated into image - Create an AutoTimer (Series Link), using Blue button in Current Channel EPG info. This has been updated to use threading, so that it will work in the background. No more spinning when checking for lots of timers. Default behaviour has been changed so that it does not check in standby only, and will check every 30 minutes. CCcamInfo - CCcamInfo plugin built directly in to image. OscamInfo - OscamInfo plugin built directly in to image. Blindscan Support Added - This allows you to access blindscan within the Service Scanning menu. CrossEPG - Updated to latest release to allow better EPG importing. Movie Player - Now, when playing a recorded item, you can search EPG and add Auto Timers for the particular recording. When watching your recording, press yellow to search the EPG, then press blue to add an AutoTimer. Button Mappings Short Red** & *** - Show current channel EPG info (ViX Single EPG). Long Red*** - Show current event. Short Green** & *** - Timers. Long Green*** - AutoTimer Timers. Short Yellow*** - EPG Search. Long Yellow*** - IMDB Database. Short Blue - Extensions. Long Blue*** - Plugins Menu. EPG - Opens ViX EPG. Left/Right** - Opens ViX QuickEPG. Up/Down** - Open Full Screen Channel List. Long Up/Down** - Open Simple TV List. TV Button** - Open Full Screen Channel List. Long TV Button - Open Bouquets List. ** Can be changed in ViX Menu *** Can be turned off in ViX Menu Known Bugs "Link-Icon" in network doesn't show up (= grey instead of green). Radio mp3 stream crashes after some time (sometimes only > 1 hour). Once that occurs, TV is also without sound. A reboot is then required. There might be a relation with Shoutcast (in use or just installed). A second subtitle in AVI, MP4 etc doesn't show up. Debugging in E2 just stops. In Partnerbox (remote TV-Player) the audiobutton causes a crash.6 Special Thanks rytec - for his continued support. PLi Team for their great base image and allowing us to use it. zoka.cc for his Picon sets Coolman and all other developers for their plugins used in the feeds of this image. All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working [hideguest]VIX 2 1.2.0 et9000 usb.zip[/hideguest]
kladovchk: EGAMI 1.0 ET-9000 Overview: - Image based on Oe 1.6 - Kernel 2.6.18-7.4 - Drivers 16.05.2011 - Most of USB Wifi Dongles should works - Most of USB Tuners - DVB-C / DVB-T / DVB-S2 should works - UP to 2 dongles ! Installed Plugins: - HDMI-CEC Support - BLIND SCAN Support - Web Interface - MyTube Player - FAN Setup - OSD 3D Setup - OSD Position setup - Cross EPG SVN 300 Buttons Mapping: OK button = LITE SKIN ( need to be turned on on GREEN PANEL -> EXTRAS -> OSD SETTINGS ) OK button x 2 = Extra Info Skin Blue button = EGAMI Blue Panel Blue button and then Yellow button = INFO Panel Blue button and then Blue button = EGAMI Settings Blue button long press = Extensions Yellow button = Time Shift Green button = EGAMI Green Panel Green button long press = Subservices Green button and then Red button = ADDONS Green button x 2 = EGAMI Settings Green button and then Yellow button = FILE MANAGER Green button and Blue button = SCRIPTS Button Red = EPG List Button PIP = Turn ON / OFF PIP Button PIP long press = PiP Menu - Move/Switch Windows Infobar: - CAM Name - ECM INFO - NETCARD INFO - CA INFO - TUNER INFO - CHANNEL INFO - NEXT EVENT INFO ( in channel list !! ) - AnalogicClock renderrer - Lite and Full infobar skin much, much and more... Egami Panel include: - Green button and then Red button takes You to EGAMI ADDONS MANAGER --> Download Egami Addons - Download extensions from Egami Server --> Manual Egami Addons Install - Install packages from /tmp --> Remove Egami Addons - Remove installed packages --> Download GUI Addons - Download CVS Extensions --> User Addons - Here You can install extensions from Your own server ( put in /etc/user_addon.txt url to catalog: example: http://your-feed-url.com/catalog_enigma2.xml ) - 2x Green button takes You to EGAMI Extras --> Kernel Modules Manager - start/stop kernel modules --> Devices Manager - here You can easily mount/map/format/settings Your extra memory storages like HDD, USB. REMEMBER TO MOUNT HDD BEFORE RECORDING !!! --> Services Panel - here You can Start/Stop/Check Status/Setting up: + NFS Server + HTTPD + Inadyn + Cron + DjMount ( UpNp Client ) + uShare ( UpNp Server ) + Syslog + Samba + OpenVPN + FTP + Telnet + Pcscd --> Mount manager - here You can mount Your networks share - CIFS/NFS --> Decoding Setup - You can disable some messages like eg. "Show Tune failed info?" --> Swap File settings - make Your swap file --> OSD Settings - Here You are able to Turn ON / OFF options like: Lite Skin, Orbital position, cam name, provider, crypt info in Infobar, Pernamental Clock, Picons and much much more... --> Stream Information - Get PAT/CAT/NIT/EIT/ECM Info --> USB Wifi & Tuner Dongles Setup - in this panel You can easily see what kind of Wifi or Tuner ( DVB-c/t/s2 ) you have connected to box and load drivers. The most complete info ever: Manfacturer, Vendor ID, ProID - Green button and then Yellow button run EGAMI FILE MANAGER --> You can Move/Copy/Remove/Rename Your files inside Your Box ! --> You can Create New Directory/New Text File/New Symlink ! --> You can change Permission of the files ! --> You can play all movies and music directly from Egami File Manager ! --> You can watch Your pictures from holiday directly from Your USB dongles by Egami File Manager ! --> You can start SHELL scripts --> You can start PYTHON scripts --> You can view most type of files by pressing OK --> 1st EVER - You can download Subtitles to Your movies stored inside your HDD - it finds subtitles exacly to version of the movie You have ! - available languages - ENGLISH, POLISH - more will come SOON... - Green button and then Blue button run EGAMI Scripts Panel --> You can run all scripts from /usr/scripts/ --> You can easily add new scripts to /usr/scripts/NAME_smartscript.sh and it will be visible in Scripts Panel Credits Thanks to the group of Beta Testers. Thanks to Rytec for providing us with the server with all epg.dat files. Thanks to SiF Team for the nicest EPG plugin ever - CrossEPG Thanks to Skaman from SiF Team for extuner and usbloader DISCLAIMER THE EGAMI IMAGE IS BASED ON THE OFFICIAL FIRMWARE PULBISHED BY XTrend AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES. THE EGAMI IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION. LASTLY, THE EGAMI IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING. LICENSE (TERM OF USE) THE EGAMI IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES. ANY CHANGES OR ADDITIONS TO EGAMI IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REWOKE OF THIS LICENSE. [hideguest]egami-image-1.0-et9000-20110616075710.zip egami-1.2-image-et9000-20110726102807.zip [/hideguest]
kladovchk: Cam upgrade for Egami Image CAM3 3908 cam3 3908 cccam 2.2.1 cccam 2.2.1 & oscam 4642 gbox 2.25 hypercam 2.1.1 mgcamd 1.35 mgcamd 1.35a scam 3.60 Только для изображения Эгами! [hideguest]Egami_Cam_Pack.zip[/hideguest]
kladovchk: If You want to use some "extras" which will appear in BLUE PANEL You can install them by putting addon tar.gz in 1) /tmp then GREEN->ADDONS->Manual installation or GREEN->FILE MANAGER -> Go to /tmp location and press OK 2) Put on USB stick, plug it in box Go to GREEN-->EXTRAS->DEVICES PANEL -> MOUNTPOINT and map your usb stick where You want Then Go to File Manaher and go to location where You have mounted your USB stick, then You will se file and press OK to install it. Если Вы хотите использовать некоторые "дополнительные услуги", который появится в Blue Panel Вы можете установить их, поставив аддон tar.gz в 1) / TMP затем GREEN-> Дополнения-> Ручная установка или GREEN-> Диспетчер файлов -> К / TMP местоположение и нажмите ОК 2) Поставить на палочке USB, подключите его в коробке К GREEN -> Дополнительно-> ПАНЕЛЬ ПРИБОРОВ -> MOUNTPOINT и карты флэшки, где Вы хотите Затем Переход к файлу Manaher и перейти на месте, где Вы смонтировали флэшки, то Вы себе файл и нажмите кнопку ОК, чтобы установить его.
kladovchk: Full Backup Image Based on the PLI with CT-panel (CT-Mod) By csm Here is my full backup image based on the current PLI image with CT panel. Contained in the image: - Latest driver - All the time unterstüsten WLAN Driver - Dmm-Skin (adapted) - Tuning (Astra 23, Astra 19, Hotbirt 13, Eutelsat 9) - Pli update can be executed Image updated: 20/06/2011 Thank you to everyone who helped. Special thanks to "babsy98" and "mogli123" [hideguest] Backup Image Based et9000 [/hideguest]
kladovchk: MultiQuickButton 2.7.9 für ET9000 Wenn ihr diese Version in unserem Image nutzen wollt dann zuerst den vorhanden MultiQuickButton löschen. Per FTP auf die Box verbinden und folgende Verzeichnisse löschen: Jetzt Enigma neustarten. Danach könnt ihr diese Version installieren. Entweder per USB Stick oder per FTP auf die Hauptebene kopieren. Dann über die Softwareverwaltung - Lokale Erweiterungen installieren. Zitat: MultiQuickButton: 2.7.9 2.7.9 info: Fernbedienungstasten: -Mark -Playlist (standard belegt mit dem MediaPlayer) -search + *Fix* eure MQB/Tasten( settings sichern/LocationBox ) wird nun richtig angezeigt und gesichert unter "/etc/MultiQuickButton/MultiQuickButton_et9000_settings.tar.gz" sind nun verwend/belegbar (thx: tam2010, manyone ) angepasst für et9000 Tasten die leider nicht/oder auch noch nicht funktionieren (zwecks fehlender Key ID zuweisung) sind: - I> slowmotion play taste - help taste (habe ich weider heraus genommen ... denn das klappte mal und mal nicht bzw eher weniger) alle anderen tasten ausser (MENU, und den obersten STB,DVD,AUX) sind nun frei belegbar ACHTUNG: wer das MultiQuickbutton hier benutzen möchte muss seine installierte MQB Version (falls vorhanden) bitte erst deinstallieren p.s alle veränderten tasten/belegung/zuweisungen haben keinerlei einfluss auf das verhalten/steuerung der plugins/programme selbst ... das heisst wenn ich als bsp. auf die taste "Stop" mir den "teletext" lege und dann bspw. im "Mediaplayer" bin bliebt die taste als "Stop" funktion erhalten mein dank für die vorhandene MQB source geht an "emanuel", "ReneW" und "plnick" [hideguest]enigma2-plugin-extensions-et9000-multiquickbutton_r2.7.9_mipsel.ipk[/hideguest]
kladovchk: ET-Toolbox v0.11 [hideguest]ET-Toolbox v0.11_upload_by_elgeneral_credits_to_Gabriella.rar[/hideguest]
kladovchk: EGAMI 1.1 ET-9000 Overview: - Image based on OE 1.6 - Kernel 2.6.18-7.4 - Drivers 27.06.2011 - Most of USB Wifi Dongles should works - Most of USB Tuners - DVB-C / DVB-T / DVB-S2 should works - UP to 2 dongles ! What's new ??? - Image include latest Front Processor - image include latest Bootloader - Latest Drivers -increase framebuffer acceleration memory size -always downmix audio on analog outputs -support /proc/stb/fp/was_timer_wakeup (needs frontpanel update) -vcr scart detection fix -vfd improvements -vfd: support greek and cyrillic charsets -vfd: support additional symbols (see /proc/stb/lcd/*) -pcm playback improvements -sci improvements -DVD Menu works OK - from ISO files also - Latest GUI - Latest GUI-Plugins - Added AC3+ / Dolby Digital + Support - Added zapUp /zapDown -> LEFT / RIGHT arrow - Added default cable.xml - thx pr2 - Added in FileManager option to play file by file -> most types of mulimedia files ( e.x 001.mts, 002.mts, 003.mts - You don't need to play one by one, it will be play from 1-3 ) - Added in File Manager < Root Directory > to make fast jump to / direcotry in Flash - Added in Mount Manager option to mount by UDP and TCP - Added animated pixmaps when We press RED to start CAM - Added in Decoding Setup -> Option to disable CI messages - Added Subtitles Menu on Subtitiles Button - Added Sleep Timer Menu on Timer Button - Added *.MTS extensions in MediaPlayer - Added Videoenhacement Plugin - Added EGAMI BackUp Manager -> You can backup/ restore EGAMI - You can install new egami, run this plugin and it will install things like emu, configs, plugins, etc... This tool allows You to flash by latest EGAMI Image but Keep Your favorite things inside !!! - Updated skin by Mimi - Updated French language by Mimi - Updated French language CrossEPG by Mimi - Fixed removing files from FLASH by EGAMI File Manager - Fixed Software Manager -> Install Local IPK - Fixed Marker - Fixed Button SAVE in FileManager Settings - Fixed Uninstaller SoftCams fixes ( killing before removing, if running softcam is removed, fall back to Common interface mode, if user remove other softcam, running softcam is still running ) - Fixed SoftCams change- it is 2 times faster now Installed Plugins: - HDMI-CEC Support - BLIND SCAN Support - Videoenhacement Plugin - Web Interface - MyTube Player - FAN Setup - OSD 3D Setup - OSD Position setup - Cross EPG SVN 300 Buttons Mapping: OK button = LITE SKIN ( need to be turned on on GREEN PANEL -> EXTRAS -> OSD SETTINGS ) OK button x 2 = Extra Info Skin Blue button = EGAMI Blue Panel Blue button and then Yellow button = INFO Panel Blue button and then Blue button = EGAMI Settings Blue button long press = Extensions Yellow button = Time Shift Green button = EGAMI Green Panel Green button long press = Subservices Green button and then Red button = ADDONS Green button x 2 = EGAMI Settings Green button and then Yellow button = FILE MANAGER Green button and Blue button = SCRIPTS Button Red = EPG List Button PIP = Turn ON / OFF PIP Button PIP long press = PiP Menu - Move/Switch Windows Infobar: - CAM Name - ECM INFO - NETCARD INFO - CA INFO - TUNER INFO - CHANNEL INFO - NEXT EVENT INFO ( in channel list !! ) - AnalogicClock renderrer - Lite and Full infobar skin much, much and more... Egami Panel include: - Green button and then Red button takes You to EGAMI ADDONS MANAGER --> Download Egami Addons - Download extensions from Egami Server --> Manual Egami Addons Install - Install packages from /tmp --> Remove Egami Addons - Remove installed packages --> Download GUI Addons - Download CVS Extensions --> User Addons - Here You can install extensions from Your own server ( put in /etc/user_addon.txt url to catalog: example: http://your-feed-url.com/catalog_enigma2.xml ) - 2x Green button takes You to EGAMI Extras --> Kernel Modules Manager - start/stop kernel modules --> Devices Manager - here You can easily mount/map/format/settings Your extra memory storages like HDD, USB. REMEMBER TO MOUNT HDD BEFORE RECORDING !!! --> Services Panel - here You can Start/Stop/Check Status/Setting up: + NFS Server + HTTPD + Inadyn + Cron + DjMount ( UpNp Client ) + uShare ( UpNp Server ) + Syslog + Samba + OpenVPN + FTP + Telnet + Pcscd --> Mount manager - here You can mount Your networks share - CIFS/NFS --> Decoding Setup - You can disable some messages like eg. "Show Tune failed info?" --> Swap File settings - make Your swap file --> OSD Settings - Here You are able to Turn ON / OFF options like: Lite Skin, Orbital position, cam name, provider, crypt info in Infobar, Pernamental Clock, Picons and much much more... --> Stream Information - Get PAT/CAT/NIT/EIT/ECM Info --> USB Wifi & Tuner Dongles Setup - in this panel You can easily see what kind of Wifi or Tuner ( DVB-c/t/s2 ) you have connected to box and load drivers. The most complete info ever: Manfacturer, Vendor ID, ProID - Green button and then Yellow button run EGAMI FILE MANAGER --> You can Move/Copy/Remove/Rename Your files inside Your Box ! --> You can Create New Directory/New Text File/New Symlink ! --> You can change Permission of the files ! --> You can play all movies and music directly from Egami File Manager ! --> You can watch Your pictures from holiday directly from Your USB dongles by Egami File Manager ! --> You can start SHELL scripts --> You can start PYTHON scripts --> You can view most type of files by pressing OK --> 1st EVER - You can download Subtitles to Your movies stored inside your HDD - it finds subtitles exacly to version of the movie You have ! - available languages - ENGLISH, POLISH - more will come SOON... - Green button and then Blue button run EGAMI Scripts Panel --> You can run all scripts from /usr/scripts/ --> You can easily add new scripts to /usr/scripts/NAME_smartscript.sh and it will be visible in Scripts Panel Credits Thanks to the group of Beta Testers. Thanks to Rytec for providing us with the server with all epg.dat files. Thanks to SiF Team for the nicest EPG plugin ever - CrossEPG Thanks to Skaman from SiF Team for extuner and usbloader DISCLAIMER THE EGAMI IMAGE IS BASED ON THE OFFICIAL FIRMWARE PULBISHED BY XTrend AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES. THE EGAMI IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION. LASTLY, THE EGAMI IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING. LICENSE (TERM OF USE) THE EGAMI IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES. ANY CHANGES OR ADDITIONS TO EGAMI IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REWOKE OF THIS LICENSE. [hideguest] egami-image-1.1-et9000.zip[/hideguest]
kladovchk: New Drivers 7.7.2011 Changelog: I do not know. [hideguest]et9000-drivers-gcc44-20110707.zip[/hideguest]
kladovchk: Clarke Tech ET-9000 Control Centre Version 1.1 Version 1.1 Released 11-7-2011 Added IPK Installer. Fixed Telnet paste issue. You can now use CTRL V or Right Mouse Button to paste code from clipboard to Telnet Window. [hideguest]ET9000CC_V1.1.zip[/hideguest] Как установить вентилятор для Clarke-Tech ET9000: http://uploading.com/files/bd7c8d78/FAN%2BControl-english.rar/
kladovchk: EgamiBoot 1.0 - MultiBoot Plugin EgamiBoot BETA 1.0 - ТОЛЬКО ДЛЯ ТЕХ У КОГО УСТАНОВЛЕН ЖЁСТКИЙ ДИСК (не будет работать на USB STICKS) !!!! -. Очень легкий и простой MultiBoot плагин командой EGAMI TEAM for ET-серии recivers Для использования EgamiBoot, необходимо установить жесткий диск - HDD устройства, и отформатировать его в EXT3 формат файла и смонтировать его . Вы можете отформатировать и смонтировать устройство, Egami Devices Panel. После установки устройства, вы должны разрешить EgamiBoot, открыв его с помощью MENU->EgamiBoot->Install. через FTP программное обеспечение, вы должны загрузить один или несколько NFI или *bin (rootfs.bin) изображение image into /media/egamiboot/EgamiBootUpload, а затем в панели EgamiBoot вы должны выбрать установочного образа (зеленая кнопка). Поэтому , новая панель будет открыта, и вы сможете выбрать, какой образ вы хотите установить, перемещая стрелки влево и вправо на пульте дистанционного управления в файл опций Источник изображения. После выбора изображения для установки, путем перемещения удаленного управления стрелками вниз, вам будет предложено выбрать опцию «Название изображения», и Вы сможете писать имя образа, вы устанавливаете (она будет такой же, вы увидите в меню панели EgamiBoot после установки). Наконец, путем перемещения дистанционного управления нажатыми , вы найдете возможность выбора, если копировать настройки для нового изображения или не делать этого. EgamiBoot поддерживает установку * NFI изображений из VU + / DM recivers и rootfs.bin файлы с ET9000 Протестировано изображений: VU + : - BlackHole 1.6.3 - VTi 2,2 DMM : - EDG-Nemesis 2,1 - Newnigma 3.2.2 - Питер Пэн Никогда Земля 2,2 ET : -! поддержки для всех изображений Для его использования EGAMI должны быть установлен в FLASH! EgamiBoot BETA 1.0 - ONLY FOR PEOPLE WHO HAS GOT HARD-RIVE INSTALLED - IT WON'T WORK ON USB STICKS !!! - Very light and simple MultiBoot Plugin by EGAMI TEAM for ET-Series recivers. To use EgamiBoot, you need to install a Hard Drive - HDD device, and format it in EXT3 file format and mount it. You can format and mount the device by Egami Devices Panel. After installing your device, you have to enable EgamiBoot by opening it by MENU->EgamiBoot->Install Now, via an FTP software, you have to upload one or more nfi or *bin ( rootfs.bin )image into /media/egamiboot/EgamiBootUpload and then into EgamiBoot panel you have to select Install Image (green button). Therefore, a new panel will be open and you will be able to select which image you want to install by moving left and right arrows on your remote control into Source Image file option. Once you select an image to install, by moving the remote control arrow down, you will select the Image Name option and you will be able to write the name of the image you are installing (it will be the same you will see in EgamiBoot menu panel after installing). Finally, by moving remote control down arrow again, you will find the option to choice if to Copy setting to new Image or not to do it. EgamiBoot support installing *NFI images from VU+ / DM recivers and rootfs.bin files from ET9000 Tested images: VU+: - BlackHole 1.6.3 - VTi 2.2 DMM: - EDG-Nemesis 2.1 - Newnigma 3.2.2 - Peter Pan Never Land 2.2 ET: - support for all images !! To use it EGAMI must be in FLASH! Stay Tuned... it will arrive SOON Источник PS Нужна регистрация.
kladovchk: New VIX Image ET9000 - v2.2.100 21/07/2011 - Open ViX 2.2.100 Based on Open PLi 2.0 From VIX Team Enigma: 21-07-2011. Enigma Plugins: 21-07-2011. GCC Version: 4.4.4. Kernel Version: 2.6.18. Drivers: 2011-06-25. If you wish to perform an online update, then you will be able to upgrade your v2.2 image to v2.2.1 via the online functions. This full image is available for those who do not have online functionality on their box, or wish to perform a full reflash... Team ViX Enchancements New Features BackupManager - Lets you create scheduled backups of your system files (not full Image like Image Manager). RestoreWizard - This a wizard that detects and restores you backup (created with BackupManager), with option to restore your extra plugins. ImageManager - Major code rewrite, now handled by Job task, view progress of image creation in extension list (blue button) ViX Menu - Added PackageManagement & Software Update, so SoftwareManager is now not needed. It is also now translatable into different languages. NetworkInadyn - Add new network setup screen Inadyn. OScam/CCam Info - Added options to show in Extension List. (the Menu item will now only show IF the softcam is installed). OnlineVersionCheck - Added option to disable online check by setting check value to '0' and set a maximun timer to 48 hours. Recording List - Added a new option in MovieList Settings to use a "Slim" list like the "Slim" Channel slection screen. EPG Graphical - This is now in core, no longer a plugin (was ViXEPG), added the option to show Bouquets on launch. EPG Menu - Add Load/Save item, this allow you reload/save the EPG cache. E2-Plugin's - Updated all to plugin's to the latest GIT from PLi. ZAP Timer - This will create a zap timer (rather than a recording timer) for the selected event in the EPG/Single EPG etc. To activate this, select the event from the EPG, and do a long button press on the record button. This is a non-configurable timer, so will use all defaults, and just set the record to a zap, rather than a record. When adding a zap timer, the clock icon will show on the previous event. This is to do with the pre-start timer. Fixes SwapManager - Code cleanup, for better activation/detecion. About Screen - Updated infomation screen, better layout, more information. VFD now shows image version. EPG Search - Fix a bug where the yellow button just opened a blank EPGSearch screen instead of actually perfoming a search on the current event. Also, added 'Show History' to long yellow button press whilst in EPGSearch. EPG Cache - Updated so now it does not require 2 reboots in order to use new location. EventView - Fix GS on opening Similar List. PluginBrowser - fix it not installing picons. ShoutCast - Fixed plugin. SoftcamManager - Add Timercheck for OScam to support no username or password in Webif, fix GS when pressing coloured buttons, if no softcams installed, also code clean up. Translation - Updated NL language files. Permantent TimeShift fix and embed PTS. Updated KeyMap - Fixes a few MoviePlayer remote control issues. ViX HD skin - PNG fix for selected items in lists, Tweaked the Jobview screen, 'New Online Version' icon now flashes to remind you of an update. VIXEPG fix - The < > keys for jumping +/- 1 day. NetworkBrowser - fix GS when creating CIFS mounts. RemoteSetup fix GS when showCoolTVGuide is selected. Button Mappings Short Red** & *** - Show current channel EPG info (ViX Single EPG). Long Red*** - Show current event. Short Green** & *** - Timers. Long Green*** - AutoTimer Timers. Short Yellow*** - EPG Search. Long Yellow*** - IMDB Database. Short Blue - Extensions. Long Blue*** - Plugins Menu. EPG - Opens ViX EPG. Left/Right** - Opens ViX QuickEPG. Left/Right** - Opens ViX QuickEPG. Up/Down** - Open Full Screen Channel List. Long Up/Down** - Open Simple TV List. TV Button** - Open Full Screen Channel List. Long TV Button - Open Bouquets List. ** Can be changed in ViX Menu *** Can be turned off in ViX Menu Known Bugs Second subtitles in AVI, MP4 etc often need a stepskip to enable them to show up. Shoutcast has no genrelists and menu is not working. Special Thanks rytec - for his continued support. PLi Team for their great base image and allowing us to use it. zoka.cc for his Picon sets Coolman and all other developers for their plugins used in the feeds of this image. All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working [hideguest]ViX 2.2.100 et9000 usb.zip[/hideguest]
kladovchk: EGAMI 1.2 ET-9000 / ET-5000 Overview: - Image based on OE 1.6 - Kernel 2.6.18-7.4 - Drivers 27.06.2011 - Most of USB Wifi Dongles should works - Most of USB Tuners - DVB-C / DVB-T / DVB-S2 should works - UP to 2 dongles ! What's new ??? in v 1.2 - EGAMI Backup Panel - now you can have severals backup of the EGAMI Image on severals connected devices to your STB - all backups are dated - so when you will make backup it will have new format: 20110712_EGAMI_Backup.egi - Egami Backup Panel -> When user makes backup - it is named like: DATE_Egami_BACKUP.egi - Egami Backup Panel -> Support for more than one backup on connected devices - user can choose which Backup he wants to restore - Egami Backup Panel -> Fixed Restore/Backup MultiQuickButton and CrossEPG ( About CoolEPG Restore - not done, because it install converters, it is not suitable to make for each plugin special backup logic ) - Also you can choose which backup you want to restore by moving UP/DOWN and after choose pressing BLUE button - Added text to inform user to press OK to reboot after Restore - Added default picon turned on as Reference read from /media/hdd/picon - Fixed user Add-on - Some Blue Panel skin improvements ( now it is listbox, not any more config ) - Some Blue Panel emu list changes - Samba conf workgroup changed to "workgroup" as a default OLD CHANGELOG What's new ??? in v 1.1 - Image include latest Front Processor - image include latest Bootloader - Latest Drivers -increase framebuffer acceleration memory size -always downmix audio on analog outputs -support /proc/stb/fp/was_timer_wakeup (needs frontpanel update) -vcr scart detection fix -vfd improvements -vfd: support greek and cyrillic charsets -vfd: support additional symbols (see /proc/stb/lcd/*) -pcm playback improvements -sci improvements -DVD Menu works OK - from ISO files also - Latest GUI - Latest GUI-Plugins - Added AC3+ / Dolby Digital + Support - Added zapUp /zapDown -> LEFT / RIGHT arrow - Added default cable.xml - thx pr2 - Added in FileManager option to play file by file -> most types of mulimedia files ( e.x 001.mts, 002.mts, 003.mts - You don't need to play one by one, it will be play from 1-3 ) - Added in File Manager < Root Directory > to make fast jump to / direcotry in Flash - Added in Mount Manager option to mount by UDP and TCP - Added animated pixmaps when We press RED to start CAM - Added in Decoding Setup -> Option to disable CI messages - Added Subtitles Menu on Subtitiles Button - Added Sleep Timer Menu on Timer Button - Added *.MTS extensions in MediaPlayer - Added Videoenhacement Plugin - Added EGAMI BackUp Manager -> You can backup/ restore EGAMI - You can install new egami, run this plugin and it will install things like emu, configs, plugins, etc... This tool allows You to flash by latest EGAMI Image but Keep Your favorite things inside !!! - Updated skin by Mimi - Updated French language by Mimi - Updated French language CrossEPG by Mimi - Fixed removing files from FLASH by EGAMI File Manager - Fixed Software Manager -> Install Local IPK - Fixed Marker - Fixed Button SAVE in FileManager Settings - Fixed Uninstaller SoftCams fixes ( killing before removing, if running softcam is removed, fall back to Common interface mode, if user remove other softcam, running softcam is still running ) - Fixed SoftCams change- it is 2 times faster now Installed Plugins: - HDMI-CEC Support - BLIND SCAN Support - Videoenhacement Plugin - Web Interface - MyTube Player - FAN Setup - OSD 3D Setup - OSD Position setup - Cross EPG SVN 300 Buttons Mapping: OK button = LITE SKIN ( need to be turned on on GREEN PANEL -> EXTRAS -> OSD SETTINGS ) OK button x 2 = Extra Info Skin Blue button = EGAMI Blue Panel Blue button and then Yellow button = INFO Panel Blue button and then Blue button = EGAMI Settings Blue button long press = Extensions Yellow button = Time Shift Green button = EGAMI Green Panel Green button long press = Subservices Green button and then Red button = ADDONS Green button x 2 = EGAMI Settings Green button and then Yellow button = FILE MANAGER Green button and Blue button = SCRIPTS Button Red = EPG List Button PIP = Turn ON / OFF PIP Button PIP long press = PiP Menu - Move/Switch Windows Infobar: - CAM Name - ECM INFO - NETCARD INFO - CA INFO - TUNER INFO - CHANNEL INFO - NEXT EVENT INFO ( in channel list !! ) - AnalogicClock renderrer - Lite and Full infobar skin much, much and more... Egami Panel include: - Green button and then Red button takes You to EGAMI ADDONS MANAGER --> Download Egami Addons - Download extensions from Egami Server --> Manual Egami Addons Install - Install packages from /tmp --> Remove Egami Addons - Remove installed packages --> Download GUI Addons - Download CVS Extensions --> User Addons - Here You can install extensions from Your own server ( put in /etc/user_addon.txt url to catalog: example: http://your-feed-url.com/catalog_enigma2.xml ) - 2x Green button takes You to EGAMI Extras --> Kernel Modules Manager - start/stop kernel modules --> Devices Manager - here You can easily mount/map/format/settings Your extra memory storages like HDD, USB. REMEMBER TO MOUNT HDD BEFORE RECORDING !!! --> Services Panel - here You can Start/Stop/Check Status/Setting up: + NFS Server + HTTPD + Inadyn + Cron + DjMount ( UpNp Client ) + uShare ( UpNp Server ) + Syslog + Samba + OpenVPN + FTP + Telnet + Pcscd --> Mount manager - here You can mount Your networks share - CIFS/NFS --> Decoding Setup - You can disable some messages like eg. "Show Tune failed info?" --> Swap File settings - make Your swap file --> OSD Settings - Here You are able to Turn ON / OFF options like: Lite Skin, Orbital position, cam name, provider, crypt info in Infobar, Pernamental Clock, Picons and much much more... --> Stream Information - Get PAT/CAT/NIT/EIT/ECM Info --> USB Wifi & Tuner Dongles Setup - in this panel You can easily see what kind of Wifi or Tuner ( DVB-c/t/s2 ) you have connected to box and load drivers. The most complete info ever: Manfacturer, Vendor ID, ProID - Green button and then Yellow button run EGAMI FILE MANAGER --> You can Move/Copy/Remove/Rename Your files inside Your Box ! --> You can Create New Directory/New Text File/New Symlink ! --> You can change Permission of the files ! --> You can play all movies and music directly from Egami File Manager ! --> You can watch Your pictures from holiday directly from Your USB dongles by Egami File Manager ! --> You can start SHELL scripts --> You can start PYTHON scripts --> You can view most type of files by pressing OK --> 1st EVER - You can download Subtitles to Your movies stored inside your HDD - it finds subtitles exacly to version of the movie You have ! - available languages - ENGLISH, POLISH - more will come SOON... - Green button and then Blue button run EGAMI Scripts Panel --> You can run all scripts from /usr/scripts/ --> You can easily add new scripts to /usr/scripts/NAME_smartscript.sh and it will be visible in Scripts Panel Credits Thanks to the group of Beta Testers. Thanks to Rytec for providing us with the server with all epg.dat files. Thanks to SiF Team for the nicest EPG plugin ever - CrossEPG Thanks to Skaman from SiF Team for extuner and usbloader DISCLAIMER THE EGAMI IMAGE IS BASED ON THE OFFICIAL FIRMWARE PUBLISHED BY XTrend AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES. THE EGAMI IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION. LASTLY, THE EGAMI IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING. LICENSE (TERM OF USE) THE EGAMI IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES. ANY CHANGES OR ADDITIONS TO EGAMI IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REVOKE OF THIS LICENSE. gracias a xtrend-community [hideguest]egami-1.2-image-et9000-20110726102807.zip[/hideguest]
kladovchk: ET9000 HDF-Teamimage v4 based on OpenPLi2.1 vom 30.07.2011 Clark-tech ET9000 HDF Teamimage v4 basierend wie immer auf dem bewährten PLi nur diesmal OpenPLi 2.1. Den Ordner et9000 auf einen USB-Stick entpacken, anstecken und den Receiver am Schalter neustarten. Entweder wird das Image im Display selber angeboten oder ihr müsst beim Starten die Menü Taste gedrückt halten. Hinweise zur Bedienung: Rot - Timer Editor Rot Lang - frei (Änderung über MultiQuickButton) Grün - Submenü Unterkanäle Grün Lang - frei (Änderung über MultiQuickButton) Gelb - frei (Änderung über MultiQuickButton) Gelb Lang - frei (Änderung über MultiQuickButton) Blau - Erweiterungen Blau Lang - Plugins Info - aktuelles Sender EPG Info Lang - Cool Single Guide Guide - Cool Multi Guide Guide lang - Cool Easy Guide Exit - Virtual Zap mit PIP Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen < > - Zap-History Filelist - Movie List Playlist - Media Player Timeshift - startet sofort Timeshift Vkey - Zugriff auf diverse installierte Plugins Vkey lang - TV Charts Plugin Mark - Timer Editor Search - EPG aktueller Sender Pip - Auswahl Pip und Pip Zap Modus Changelog: - Treiber vom 07.07.2011 http://www.et-view.com/download/drivers/ - Änderungen OpenPLi 2.1 - Enigma2: [url=http://openpli.git.sourceforge.net/g...ma2;a=shortlog]http://openpli.git.sourceforge.net/g...ma2;a=shortlog[/url] - openembedded: http://openpli.git.sourceforge.net/g...refs/heads/2.1 - Plugins: [url=http://openpli.git.sourceforge.net/g...ins;a=shortlog]http://openpli.git.sourceforge.net/g...ins;a=shortlog[/url] enthaltene Plugins / Addons: - SHOUTcast mit funktionierender Aufnahme - MultiQuickbutton aktuelle Version - YTTrailer (TV, TEXT, RADIO Taste im EPG Overview um Trailer zum aktuellen EPG Eintrag zu sehen) - Youtube Player (auch als Grundlage für YTTrailer) - Sport Portal (Formel 1und Fussball) - TV Charts (aktuelle Quoten der TV Charts Benutzer) - Wetter Informationen - Bitrate Viewer (lang rot und Vkey) - Cool Multi Guide 4.0.0 Wichtig!!! Aktueller Bootloader muss installiert sein. Bootloader im Anhang herunterladen und per USB-Stick wie ein Image installieren. Der Bootloader im Anhang ist der aktuelle Loader welcher bis zu 100MB Flash unterstützt und den Splash Screen hat. [hideguest]et9000 hdfreaks.v4 PLi2.1 30072011.rar[/hideguest]
kladovchk: HDF-Teamimage v4.1 01.08.2011 ET9000 HDF-Teamimage v4.1 based on OpenPLi2.1 vom 01.08.2011 Clark-tech ET9000 HDF Teamimage v4 basierend wie immer auf dem bewährten PLi nur diesmal OpenPLi 2.1. Den Ordner et9000 auf einen USB-Stick entpacken, anstecken und den Receiver am Schalter neustarten. Entweder wird das Image im Display selber angeboten oder ihr müsst beim Starten die Menü Taste gedrückt halten. Hinweise zur Bedienung: Rot - Timer Editor Rot Lang - frei (Änderung über MultiQuickButton) Grün - Submenü Unterkanäle Grün Lang - frei (Änderung über MultiQuickButton) Gelb - frei (Änderung über MultiQuickButton) Gelb Lang - frei (Änderung über MultiQuickButton) Blau - Erweiterungen Blau Lang - Plugins Info - aktuelles Sender EPG Info Lang - Cool Single Guide Guide - Cool Multi Guide Guide lang - Cool Easy Guide Exit - Virtual Zap mit PIP Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen < > - Zap-History Filelist - Movie List Playlist - Media Player Timeshift - startet sofort Timeshift Vkey - Zugriff auf diverse installierte Plugins Vkey lang - TV Charts Plugin Mark - Timer Editor Search - EPG aktueller Sender Pip - Auswahl Pip und Pip Zap Modus Changelog: - Treiber vom 07.07.2011 http://www.et-view.com/download/drivers/ - Änderungen OpenPLi 2.1 - Enigma2: [url=http://openpli.git.sourceforge.net/g...ma2;a=shortlog]http://openpli.git.sourceforge.net/g...ma2;a=shortlog[/url] - openembedded: http://openpli.git.sourceforge.net/g...refs/heads/2.1 - Plugins: [url=http://openpli.git.sourceforge.net/g...ins;a=shortlog]http://openpli.git.sourceforge.net/g...ins;a=shortlog[/url] enthaltene Plugins / Addons: - SHOUTcast mit funktionierender Aufnahme - MultiQuickbutton aktuelle Version - YTTrailer (TV, TEXT, RADIO Taste im EPG Overview um Trailer zum aktuellen EPG Eintrag zu sehen) - Youtube Player (auch als Grundlage für YTTrailer) - Sport Portal (Formel 1und Fussball) - TV Charts (aktuelle Quoten der TV Charts Benutzer) - Wetter Informationen - Bitrate Viewer (lang rot und Vkey) - Cool Multi Guide 4.0.0 Wichtig!!! Aktueller Bootloader muss installiert sein. Bootloader im Anhang herunterladen und per USB-Stick wie ein Image installieren. Der Bootloader im Anhang ist der aktuelle Loader welcher bis zu 100MB Flash unterstützt und den Splash Screen hat. [hideguest]et9000 hdfreaks.v4.1 PLi2.1 01082011.rar[/hideguest]
kladovchk: Clarke-Tech Support Image V2 Wichtig: Installation: Bevor du das Image erstmalig installierst (flasht), solltest du den Bootloader aktualisieren. Wenn du dies nicht machen würdest, startet das Image nicht (außer du hast bereits vorher einen aktuellen Bootloader installiert.) Der Bootloader muss nur einmalig geflasht werden, danach kannst du das CT-Image jederzeit und ohne Bootloader Aktualisierung neu flashen. Das Image wird dann ohne Fehler starten. Bootloader Download http://www.clarke-support.com/Forum/...9&d=1312638796 Basierend auf dem OPENPLI Nightly Build vom 02.08.2011 Clarke-Tech Image-Verbesserungen: - Clarke-Tech HD Lava Skin mit PIG (Ein aktuelles Bild vom ausgewählten Sender - in vielen Menüs) - Clarke-Tech Bootlogos und Radio Logo - Clarke-Tech Panel Bitte betrachte die Bilder am Ende dieses Beitrags, um bereits jetzt einen kurzen Überblick über die Neuerungen zu bekommen. - Sysinfopanel (Darstellung von Systemeigenschaften) - HDMI-CEC Support mittels Plugin - Sundtek USB-DVB/C/T/S2 Unterstützung - WLAN fixes und Unterstützung für 80211b/g/n Ralink basierende USB-Sticks (rt871x) - Running "broken" Shellscript (as Cronjobs) will work - Akustikpatch (benötigt eine HDD die akustik-management unterstützt, bitte nötigenfalls den Festplatten-Hersteller kontaktieren.) Bekannte Bugs - WLAN mit dem Chipsatz rt3070,rtl8187 Highlights: -Daemon Manager. Was ist das? Ein Daemon ist ein im Hintergrund laufender Prozess. Dieser Daemon erfordert ein Start-/Stopscript - dieses Script muss ausführbar sein (chmod 755) und sich im Ordner /etc/init.d befinden, der Name muss immer mit "dmon." beginnen. - Blindscan Support - CT Nachrichten-Feed (Erfahre alles Wichtige rund um deinen Boxen-Hersteller CT.) Integrierte Plugins CT-Panel AudioSync CutListEditor EPGImport GlassSysUtil GraphMultiEPG MediaPlayer MediaScanner PicturePlayer Tuxtxt WebMedia Eine optimierte Clarke-Tech ET9000-Version des Plugins Multiquickbutton. Code: 1. Zurück <: Zap History - 2. Vor >: Zap History + 3. Farbtasten •Rot: •Rot (lang): •Grün: Auswahl Optionskanäle •Grün (lang): •Gelb: Audio Einstellungen •Gelb (lang): •Blau: Erweiterungsmenü •Blau (lang): 4. GUIDE: Programmübersicht GUIDE (lang): 5. INFO (i): Programmübersicht INFO (i) (lang): 6. MENU (Lang): 7. EXIT: Infobar 8. OK: Infobar 9. Steuerkreuz •Runter: Kanalliste •Links: Sender zurück - •Rechts: Sender vor + •Auf: Kanalliste 10. VOL. +/-: ** 11. P+: Kanalliste P-: Kanalliste 12. Filelist: Aufnahmen Filelist (lang): 13. Playlist: Playlist (lang): 14. zurückspulen << : 15. vorspulen ****: 16. Play/Pause >II: Starte Timeshift 17. REC: Aufnahmemenü REC (lang): 18. Slowmotion I>: *** 19. Stop: Stoppe Timeshift 20. Timeshift: Starte Timeshift Timeshift (lang): Stoppe Timeshift 21. search: serach (lang): 22. Mark: Mark (lang): 23. Timer: Timer (lang): 24. Vkey: Aufnahmen Vkey (lang): 25. PIP: Bild in Bild PIP (lang): Tausche Bild in Bild 26. TEXT: Teletext TEXT (lang): 27. subtitle: Untertitel subtitle (lang): Untertitel Einstellungen 28. AUDIO: Audio Einstellungen AUDIO (lang): 29. TV: TV TV (lang): 30. Help (lang): 31. RADIO: Radio RADIO (lang): Volle Updatefähigkeit über den neuen Clarke-Tech Server (bequem per Feed). Inklusive Frontpanel update (fix 1.1 R3) Inklusive Treiber vom 27.06.2011 Neuer Kernel 2.6.31 Achtung! Um eure gesichteren System-Einstellungen (u. A. Programmlisten, Satelliten) wieder nutzen zu können, bitte nicht den Assistenten nach dem Neuflash verwenden, sondern macht dies anschließend über das CT Panel -> Tools -> System Einstellungen -> Sicherung/Wiederherstellung. So könnt ihr eure gewünschten Einstellungen "zurückspielen", und auch neue Sicherungen anlegen. Vielen Dank! Besonderer Dank: pcd (Hauptentwickler) wallie2000 (unterstützender Entwickler) Clarkemaster(Skins,Bootlogos) All Betatesters (Coolman, CoolST, csm, dispatcher, tam2010, z-pg-3) mogli123 (optimierte MultiQuickButton-Version) Ein Große dankeschön an ClarkeBoss http://depositfiles.com/files/sv23qoict Bootloader for ET9000 (UBIFS) from the Support Team for CT image 2 (Загрузчик для ET9000 (UBIFS) из группы поддержки для CT изображение 2) http://depositfiles.com/files/0usb721cy
kladovchk: Power of Dream HD+ Image for ET-9000 17-08-2011 Changes: - Updated drivers - Vfd: cyrillic / greek charactermap Improvements - Scart: fix slowblanking - Alsa: fix pcm playback of high bit rate data - Fix mute status of ac3 passthrough mode in - Add 'use_advanced_remote - Add ioctl HDMI-CEC [hideguest]podhd-et9000.zip[/hideguest]
kladovchk: Power of Dream HD+ Image for ET-9000 New Image by SandBox Team based on Openpli 2.1 ATTENTION: - It is not possible to go from 2.0 to 2.1 by an updated online, it is mandatory to flash a 2.1 full - This new image requires an update of the bootloader before it can be installed [hideguest]podhd-2.1-et9000.zip[/hideguest]
kladovchk: EGAMI BACKUP 2011 08 20 .: MONSTER::. - Gotowiec, - ET5000 & ET9000 Hi, I'm a fan of software EGAMI, why? - Works 90% of the DVB-t - Works 90% of Wi-Fi card - Has NapiProjekt - Have a nice file manager - Fast and stabliny I decided to use the new version came with v1.2 namely Backup EGAMI Panel This is a panel where we can create fast backup settings / plugins / camów and other things. So when Egami v 1.3 comes out so we can upload the backup and we are in a minute we set + New Image! I decided to spend my Egami Backup panel. - Charter of C +, Polsat operates in slot - TNK HD module works - Channel list - HB - latest EgamiBackup is designed for people who want to upload, and no work - no combining. Egami Backup include: - CCcam 2.2.1 - OSCam - latest - FEED to CAMów - ASPECTRATIO Switch - CCcam Info - CCcamPrio Maker - DMNapi - Pernamental Timeshift - DreamExpoler - Free Memory - GlassSystem Utils - Live Football - MyTube - OSCam Status - Sundtek Control Center Requirements: - Egami v1.2 (DOWNLOAD) - File Egami_Backup to USB or HDD Installation: 1st Egami normal image uploading to the tuner v1.2 2nd Omjijamy configurator 3rd After installation, you must mount the device on which you have previously downloaded file 4th Press 2xZIELONY -> Devices Manager We'll see our connected devices we have in our ET [hideguest]20110820_EGAMI_Backup.egi[/hideguest]
kladovchk: EGAMI 1.3 ET-9000 Overview: - Image based on OE 1.6 - Kernel 2.6.18-7.4 - Drivers 27.06.2011 - Most of USB Wifi Dongles should works - Most of USB Tuners - DVB-C / DVB-T / DVB-S2 should works - UP to 2 dongles ! What's new ??? in v 1.3 - Improved OSD info in Infobar for OSCam - Improved HDMI-CEC driver ( thx to openstb git owner ) - now it is fully working HDMI CEC - Improved EGAMI File Manager - now it corretly PLAY .VOB files, some of them need to be PAUSED and then RESUMED to get playing... - Fixed WebInterface ( movie list ) - Fixed some "greenscreens" in File Manager - Fixed MyTube - Added EgamiBoot 1.0 - multiboot plugin - Added Image version info in Menu->Informations->About - Added Image version info on Bootlogos EgamiBoot 1.0 FAQ - READ HERE [hideguest]EgamiBoot v1.0 FAQ[/hideguest] Installed Plugins: - HDMI-CEC Support - BLIND SCAN Support - Videoenhacement Plugin - Web Interface - MyTube Player - FAN Setup - OSD 3D Setup - OSD Position setup - Cross EPG SVN 300 Buttons Mapping: OK button = LITE SKIN ( need to be turned on on GREEN PANEL -> EXTRAS -> OSD SETTINGS ) OK button x 2 = Extra Info Skin Blue button = EGAMI Blue Panel Blue button and then Yellow button = INFO Panel Blue button and then Blue button = EGAMI Settings Blue button long press = Extensions Yellow button = Time Shift Green button = EGAMI Green Panel Green button long press = Subservices Green button and then Red button = ADDONS Green button x 2 = EGAMI Settings Green button and then Yellow button = FILE MANAGER Green button and Blue button = SCRIPTS Button Red = EPG List Button PIP = Turn ON / OFF PIP Button PIP long press = PiP Menu - Move/Switch Windows Infobar: - CAM Name - ECM INFO - NETCARD INFO - CA INFO - TUNER INFO - CHANNEL INFO - NEXT EVENT INFO ( in channel list !! ) - AnalogicClock renderrer - Lite and Full infobar skin much, much and more... Egami Panel include: - Green button and then Red button takes You to EGAMI ADDONS MANAGER --> Download Egami Addons - Download extensions from Egami Server --> Manual Egami Addons Install - Install packages from /tmp --> Remove Egami Addons - Remove installed packages --> Download GUI Addons - Download CVS Extensions --> User Addons - Here You can install extensions from Your own server ( put in /etc/user_addon.txt url to catalog: example: http://your-feed-url...log_enigma2.xml ) - 2x Green button takes You to EGAMI Extras --> Kernel Modules Manager - start/stop kernel modules --> Devices Manager - here You can easily mount/map/format/settings Your extra memory storages like HDD, USB. REMEMBER TO MOUNT HDD BEFORE RECORDING !!! --> Services Panel - here You can Start/Stop/Check Status/Setting up: + NFS Server + HTTPD + Inadyn + Cron + DjMount ( UpNp Client ) + uShare ( UpNp Server ) + Syslog + Samba + OpenVPN + FTP + Telnet + Pcscd --> Mount manager - here You can mount Your networks share - CIFS/NFS --> Decoding Setup - You can disable some messages like eg. "Show Tune failed info?" --> Swap File settings - make Your swap file --> OSD Settings - Here You are able to Turn ON / OFF options like: Lite Skin, Orbital position, cam name, provider, crypt info in Infobar, Pernamental Clock, Picons and much much more... --> Stream Information - Get PAT/CAT/NIT/EIT/ECM Info --> USB Wifi & Tuner Dongles Setup - in this panel You can easily see what kind of Wifi or Tuner ( DVB-c/t/s2 ) you have connected to box and load drivers. The most complete info ever: Manfacturer, Vendor ID, ProID - Green button and then Yellow button run EGAMI FILE MANAGER --> You can Move/Copy/Remove/Rename Your files inside Your Box ! --> You can Create New Directory/New Text File/New Symlink ! --> You can change Permission of the files ! --> You can play all movies and music directly from Egami File Manager ! --> You can watch Your pictures from holiday directly from Your USB dongles by Egami File Manager ! --> You can start SHELL scripts --> You can start PYTHON scripts --> You can view most type of files by pressing OK --> 1st EVER - You can download Subtitles to Your movies stored inside your HDD - it finds subtitles exacly to version of the movie You have ! - available languages - ENGLISH, POLISH - more will come SOON... - Green button and then Blue button run EGAMI Scripts Panel --> You can run all scripts from /usr/scripts/ --> You can easily add new scripts to /usr/scripts/NAME_smartscript.sh and it will be visible in Scripts Panel OLD CHANGELOG What's new ??? in v 1.2 - EGAMI Backup Panel - now you can have severals backup of the EGAMI Image on severals connected devices to your STB - all backups are dated - so when you will make backup it will have new format: 20110712_EGAMI_Backup.egi - Egami Backup Panel -> When user makes backup - it is named like: DATE_Egami_BACKUP.egi - Egami Backup Panel -> Support for more than one backup on connected devices - user can choose which Backup he wants to restore - Egami Backup Panel -> Fixed Restore/Backup MultiQuickButton and CrossEPG ( About CoolEPG Restore - not done, because it install converters, it is not suitable to make for each plugin special backup logic ) - Also you can choose which backup you want to restore by moving UP/DOWN and after choose pressing BLUE button - Added text to inform user to press OK to reboot after Restore - Added default picon turned on as Reference read from /media/hdd/picon - Fixed user Add-on - Some Blue Panel skin improvements ( now it is listbox, not any more config ) - Some Blue Panel emu list changes - Samba conf workgroup changed to "workgroup" as a default What's new ??? in v 1.1 - Image include latest Front Processor - image include latest Bootloader - Latest Drivers -increase framebuffer acceleration memory size -always downmix audio on analog outputs -support /proc/stb/fp/was_timer_wakeup (needs frontpanel update) -vcr scart detection fix -vfd improvements -vfd: support greek and cyrillic charsets -vfd: support additional symbols (see /proc/stb/lcd/*) -pcm playback improvements -sci improvements -DVD Menu works OK - from ISO files also - Latest GUI - Latest GUI-Plugins - Added AC3+ / Dolby Digital + Support - Added zapUp /zapDown -> LEFT / RIGHT arrow - Added default cable.xml - thx pr2 - Added in FileManager option to play file by file -> most types of mulimedia files ( e.x 001.mts, 002.mts, 003.mts - You don't need to play one by one, it will be play from 1-3 ) - Added in File Manager < Root Directory > to make fast jump to / direcotry in Flash - Added in Mount Manager option to mount by UDP and TCP - Added animated pixmaps when We press RED to start CAM - Added in Decoding Setup -> Option to disable CI messages - Added Subtitles Menu on Subtitiles Button - Added Sleep Timer Menu on Timer Button - Added *.MTS extensions in MediaPlayer - Added Videoenhacement Plugin - Added EGAMI BackUp Manager -> You can backup/ restore EGAMI - You can install new egami, run this plugin and it will install things like emu, configs, plugins, etc... This tool allows You to flash by latest EGAMI Image but Keep Your favorite things inside !!! - Updated skin by Mimi - Updated French language by Mimi - Updated French language CrossEPG by Mimi - Fixed removing files from FLASH by EGAMI File Manager - Fixed Software Manager -> Install Local IPK - Fixed Marker - Fixed Button SAVE in FileManager Settings - Fixed Uninstaller SoftCams fixes ( killing before removing, if running softcam is removed, fall back to Common interface mode, if user remove other softcam, running softcam is still running ) - Fixed SoftCams change- it is 2 times faster now Credits Thanks to the group of Beta Testers. Thanks to Rytec for providing us with the server with all epg.dat files. Thanks to SiF Team for the nicest EPG plugin ever - CrossEPG Thanks to Skaman from SiF Team for extuner and usbloader DISCLAIMER THE EGAMI IMAGE IS BASED ON THE OFFICIAL FIRMWARE PUBLISHED BY XTrend AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES. THE EGAMI IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION. LASTLY, THE EGAMI IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING. LICENSE (TERM OF USE) THE EGAMI IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES. ANY CHANGES OR ADDITIONS TO EGAMI IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REVOKE OF THIS LICENSE. www.xtrend-community.com [hideguest]egami-1.3-image-et9000-20110823.zip[/hideguest]
kladovchk: Black Hole 1.6.4a Full Hdmi-Cec - XTREND ET9000 and ET5000 YOU MUST TO HAVE LATEST BOOTLOADER !!! What is new in 1.6.4a? - Fixed GreenScreen on CrossEPG - Initial relase for ET9000 - VFD ALSO WORKS OK !!! What is new ? The new Black Hole Hdmi-Cec driver allow you to command two devices (Tv and Vu+ box) with only ONE Remote control (Tv remote control) Not all television are compatibile with this funcion, as for example Panasonic seems to be not yet compatible with Bh Hdmi-Cec. But Bh Hdmi-Cec is tested and report working on all latest Samsung(Anynet+), Philips and and other Tv models like Sony Bravia KDL40EX402 series. But we cannot test all tv recent models, so please help us reporting your tests too with your television model. Instructions to connect the box to your Hdmi-Cec compatible Tv: 1) Enter in your Tv Menu Options and enable all the Hdmi-Cec options. 2) Enter in your Vu+ box Black Hole Hdmi-Cec Panel Setup (blue->blue->Black Hole Hdmi Cec: Configure in this screen the right Hdmi connection port and enable Bh Hdmi-Cec. 3) Click Save (red) button and your box will try to connect with your Tv. All Done. If your Tv is compatible you can now control Tv and Box with Tv rc. Warning: You have to select the specific port option if your box is connected to an ampli. WARNING: This Image has the latest drivers and CAN NOT be installed in multiboot. The image MUST be installed in the flash. Black Hole can not support images not installed in the flash. This latest version of the Black Hole series has been entirely rewritten and improved in the code for maximum stability and performance. Please note that of all images Black Hole now has the best epg system: - Integrated OpenEpg - Rytec dedicated epg.dat - New system epg.dat outside. This last feature gives the possibility to various forums or communities to create their favorite EPG data files and load them into a web space. Community members can then download it from our servers. This feature provides other benefits such as: Increase download speed of EPG Download EPG from any channel Schedule the download of EPG decoder even during standby Users can customize the providers using Add / Remove function Main functions of the buttons on the remote OK button = Skin with simple information OK button x 2 = Extra Info Skin Blue button = Black Hole Blue Panel Blue button and then Red button = Black Hole Epg Panel Blue button and then Yellow button = System Monitor Panel Blue button long press = Extensions Yellow button = Time Shift Green button = Black Hole Green Panel Green button long press = Subservices Green button and then Red button = Fast Plugin Setup Green button x 2 = Fast Plugin Button Red = Start Record Credits DISCLAIMER LASTLY, THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR IILEGAL PURPOSES SUCH AS CARD SHARING. LICENSE (TERM OF USE) THE BLACK HOLE IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES. ANY CHANGES OR ADDITIONS TO BLACK HOLE IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REWOKE OF THIS LICENSE. [hideguest]blackhole 1 6 4a et9000 image 20110907.rar blackhole_1_6_4a_et5000_image_20110907.rar[/hideguest]
kladovchk: Black Hole 1.6.5 Full Hdmi-Cec - XTREND ET9000 and ET5000 YOU MUST TO HAVE LATEST BOOTLOADER !!! What is new in 1.6.5? New Skin Beyounce 14 by Matrix 10 - Fixed GreenScreen on CrossEPG - Initial relase for ET9000 - VFD ALSO WORKS OK !!! - MEDIATOMB updated to ver. 0.12.1 - NTFS-3G updated to ver. 2011.4.12. - OpenVPN updated to ver. 2.2.1 - VsFTPd updated to ver. 2.3.4 - Dropbear updated to ver. 0.53.1 What is new ? The new Black Hole Hdmi-Cec driver allow you to command two devices (Tv and Vu+ box) with only ONE Remote control (Tv remote control) Not all television are compatibile with this funcion, as for example Panasonic seems to be not yet compatible with Bh Hdmi-Cec. But Bh Hdmi-Cec is tested and report working on all latest Samsung(Anynet+), Philips and and other Tv models like Sony Bravia KDL40EX402 series. But we cannot test all tv recent models, so please help us reporting your tests too with your television model. Instructions to connect the box to your Hdmi-Cec compatible Tv: 1) Enter in your Tv Menu Options and enable all the Hdmi-Cec options. 2) Enter in your Vu+ box Black Hole Hdmi-Cec Panel Setup (blue->blue->Black Hole Hdmi Cec: Configure in this screen the right Hdmi connection port and enable Bh Hdmi-Cec. 3) Click Save (red) button and your box will try to connect with your Tv. All Done. If your Tv is compatible you can now control Tv and Box with Tv rc. Warning: You have to select the specific port option if your box is connected to an ampli. WARNING: This Image has the latest drivers and CAN NOT be installed in multiboot. The image MUST be installed in the flash. Black Hole can not support images not installed in the flash. This latest version of the Black Hole series has been entirely rewritten and improved in the code for maximum stability and performance. Please note that of all images Black Hole now has the best epg system: - Integrated OpenEpg - Rytec dedicated epg.dat - New system epg.dat outside. This last feature gives the possibility to various forums or communities to create their favorite EPG data files and load them into a web space. Community members can then download it from our servers. This feature provides other benefits such as: Increase download speed of EPG Download EPG from any channel Schedule the download of EPG decoder even during standby Users can customize the providers using Add / Remove function Main functions of the buttons on the remote OK button = Skin with simple information OK button x 2 = Extra Info Skin Blue button = Black Hole Blue Panel Blue button and then Red button = Black Hole Epg Panel Blue button and then Yellow button = System Monitor Panel Blue button long press = Extensions Yellow button = Time Shift Green button = Black Hole Green Panel Green button long press = Subservices Green button and then Red button = Fast Plugin Setup Green button x 2 = Fast Plugin Button Red = Start Record Addons Green button and then Yellow button takes you to:- Dedicated server for BlackHole addons Download and install additional packages from the Black Hole server Infobar / OSD Analog Clock Gui Channel orbital location Advanced Tuner Info: Sr Freq Pol Fec Signal SNR, BER Infobar picons Characteristics of BlackHole Panels Blue Panel Extra Settings Black Hole Cron Manager (Manage schedules) OSD Settings (OSD configuration) Devices Manager Black Hole HDMI Cec Manager Kernel Modules (Kernel module web browsertor) Inadyn Settings (Configure Inadyn) Swap File Settings (Configure File Swap) Hard Disk Settings (Configure Hard Drive) Black Hole Mount Wizard (Mount points) OpenVPN Panel ( OpenVPN Panel) Samba / CIFS Panel ( Samba Panel) NFS Server Panel ( NFS server Panel) Telnet Panel ( Telnet Panel) FTP Panel ( FTP Panel) Usb Tuner Panel UPnP Client Djmount UPnP Server Mediatomb Info Panel 1 - Gui Setting (Gui configurations) 2 - Service Information (information system) 3 - About (info) Memory (Memory) Space (capacity) CPU (processor) Process (process) EPG Panel Global settings (global settings EPG) Setting Provider (ISP settings) Green Panel Fast Plugin Setup (Configure quick access to your favourite plugin) Fast Plugin (Access your favourite plugin) Addons (added) Addons Download Manager (Manager for package downloading) Installation manual packages (Manual installation of Black Hole packages) Manual Install IPK packages (Manual installation of IPK packages) Addons Uninstall Panel (Uninstalled packages) Black Hole Statistics (See connections, top downloads and more) Credits Thanks to the group of Beta Testers. Thanks to Rytec for providing us with the server with all epg.dat files. Thanks to MaxZ4 for Integrated EPG loader. Thanks to Sandro Cavazzoni for Cross EPG Thanks to Lukkino (VDR-Italy) for the source code of OpenTV. Thanks to Reinh@rd for the file satellites.xml. Thanks to bigroma (vuplus-community board) for rt3070 patches. [hideguest]BlackHole-1.6.5-et9000-20110920.rar click here[/hideguest]
kladovchk: Online update Power of Dream HD+ Image for ET9000 05/10/2011 - Modification of hypercam manager: the launch of enigmatic, verify that at least one local card is detected. If this is not the case, recovery hypercam. This should overcome the desire to hypercam etx000 on the launch. - Changes introduced by OpenPlant etxx00 linux -update routine Enigma2 To take the lastest update of POD Image just go to: Menu - Settings - Software Manager - Software update
kladovchk: ET-Toolbox v0.40 - EnigmEdit 1.38 hinzugefügt - Filezilla 3.5.1 -> neue Version hinzugefügt - Driver (Test) 20-08-2011 hinzugefügt - Driver 26-09-2011 hinzugefügt - Driver 30-09-2011 hinzugefügt - Bootloader 30-09-2011 hinzugefügt - Frontpanel Update 17-09-2011 hinzugefügt - Deutsche Bedienungsanleitung hinzugefügt [hideguest]ET-Toolbox_v0.40.zip[/hideguest]
kladovchk: HDF-Teamimage v4.2 16.10.2011 ET9x00 HDF-Teamimage v4.2 based on OpenPLi2.1 vom 16.10.2011 Clark-tech ET9x00 HDF Teamimage v4.2 basierend wie immer auf dem bewährten PLi 2.1. Den Ordner et9x00 auf einen USB-Stick entpacken, anstecken und den Receiver neustarten. Wer Probleme beim Flashen hat sollte versuchen den Ordner auf dem USB Stick in "ET9X00" (großes X) umzubennen. Das Plugin "Autoinstall" sollte im alten Image deaktiviert sein und es sollten keine alten Backups auf Platte oder Stick vorhanden sein. Sonst wird automatisch wiederhergestellt. Für das Image wird der aktuelle Bootloader benötigt. Der original Bootloader ist von hier: http://www.clarke-xtrend-support.com/Forum/showthread.php?3625-Bootloader Im Prinzip ist es ein HDF 4.1 auf die neue Struktur aktualisiert mit aktuellen Updates und Treibern. Wenn beim Setup kein Sendersuchlauf gemacht wird ist eine vorbereitete Senderliste enthalten. Hinweise zur Bedienung: Rot - Timer Editor Rot Lang - frei (Änderung über MultiQuickButton) Grün - Submenü Unterkanäle Grün Lang - frei (Änderung über MultiQuickButton) Gelb - frei (Änderung über MultiQuickButton) Gelb Lang - frei (Änderung über MultiQuickButton) Blau - Erweiterungen Blau Lang - Plugins Info - aktuelles Sender EPG Info Lang - Cool Single Guide Guide - Cool Multi Guide Guide lang - Cool Easy Guide Exit - Virtual Zap mit PIP Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen < > - Zap-History Filelist - Movie List Playlist - Media Player Timeshift - startet sofort Timeshift Vkey - Zugriff auf diverse installierte Plugins Vkey lang - TV Charts Plugin Mark - Timer Editor Search - EPG aktueller Sender Pip - Auswahl Pip und Pip Zap Modus Changelog: - Änderungen OpenPLi 2.1: http://twitter.com/#%21/openpli - Enigma2: http://openpli.git.sourceforge.net/git/gitweb.cgi?p=openpli/enigma2;a=shortlog - openembedded: http://openpli.git.sourceforge.net/git/gitweb.cgi?p=openpli/openembedded;a=shortlog - Plugins: http://openpli.git.sourceforge.net/git/gitweb.cgi?p=openpli/enigma2-plugins;a=shortlog enthaltene Plugins / Addons: - SHOUTcast mit funktionierender Aufnahme - MultiQuickbutton aktuelle Version, leicht angepasst - YTTrailer (TV, TEXT, RADIO Taste im EPG Overview -> Info Taste um Trailer zum aktuellen EPG Eintrag zu sehen) - Youtube Player (auch als Grundlage für YTTrailer) - Sport Portal (Formel 1und Fussball) - LiveFootBall - Dreamexplorer - InfoBarTunerState - Menusort - DTS Downmix Plugin - TV Charts (aktuelle Quoten der TV Charts Benutzer) - Wetter Plugins (Foreca, Wetter Informationen) - Bitrate Viewer (lang rot und Vkey) - Cool Multi Guide 5.0.0 - Oscam-Experimental mit vorbereiteten Configs für die Cardreader Wichtig!!! Aktueller Bootloader muss installiert sein. Der Bootloader ist von hier: http://www.clarke-xtrend-support.com/Forum/showthread.php?3625-Bootloader Bootloader im Anhang herunterladen und per USB-Stick wie ein Image installieren. Der Bootloader im Anhang ist der aktuelle Loader mit et9x00 Unterstützung. [hideguest]et9x00 hdfreaks.v4.2 PLi2.1 16102011.zip[/hideguest]
kladovchk: [center]ClarkeTech-Xtrend-Team proudly presents World Exclusive OpenPli2.1 beta Image based on Linux3.0.3 for ET9x00 little overview: - Improved dvb-usb like Vtuner, webcam - - Improved wifi usb devices - - Improved file system: UBIFS and EXT4 - - Improved streaming - - Improved picture quality and sound - - Improved overall preformance by about 10% - - and much more !!! - And again, ClarkeTech-XTrend-Team has done before all others! Others only talking, WE DO IT !!! Attention !!! - Plz du not Update yet - Updateserver are online in 2-3 Days !!! Attention !!! !!! Achtung !!! Bitte noch keine Onlineupdates ausführen! Die Server werden in 2-3 Tagen angepasst. !!! Achtung !!! --- This is only a Beta Version plz report all bugs what you found here --- --- Es handelt sich noch um eine Betaversion, daher bitte jegliche Fehler wo ihr findet hier Posten danke --- !!! Needs the latest Bootloader (30.09.2011) from here LINK !!! !!! Benötigt den aktuellen Bootloader (30.09.2011) von hier LINK !!! Special Thx to: wallie2000, tam2010, dispatcher, Biki3, z-pg-3, janosch, Pcd, CoolST, clarkemaster, memo and all other devs! viel spass damit grüße ice... *ein thx wäre schön*[/center] [hideguest]openpli-2.1-et9x00-20111016151229_usb.zip[/hideguest]
kladovchk: Clarke-Xtrend Support Image V3 Этот образ основан на Linux 3.03. Поэтому необходима последняя загрузчик 30.09.2011! и сначала установить процедуры, необходимые для Linux основанный 3,03 openpli et9x00 изображения. Также важно - пожалуйста, прочтите Readme в КТ панель для изображения используйте инструкции Important This image is based on Linux 3.03. Therefore it requires the latest bootloader 30.09.2011! and first install procedure necessary for the Linux 3.03 based openpli et9x00 image. Also important - please read the Readme in CT Panel for image use instructions Clarke-Tech Enhancements for the completely modular Image - Clarke-Xtrend HD Lava Skin with pig (picture in graphic) in many menus - Clarke-Xtrend Bootlogos and Radio Logo - Clarke-Xtrend Panel Please see attached Screenshots for a short overview of all Parameters - Best Sysinfopanel (complete overview of systemparameters) - HDMI-CEC Support via Plugin - WLAN fixes and support for 80211b/g/n Ralink, Realtek, Carl based USB-Dongles (rt2800USB, rtl871x, AR9170) - Running "broken" Shellscript (as Cronjobs) will work - Acousticpatch (needs a HDD that supports acoustic parameter consult HDD manufacturer for this) Highlights: -Clarke-Xtrend Webbrowser HbbTV. This image fully supports the unique Webbrowser HbbTV for more info see the readme or visit our forum. -Daemon Manager. For information - a daemon is a computer program that runs in the background. The daemon requires a start/stop script - the script must be executable (chmod 755), placed in /etc/init.d and the name must start with "dmon." Switch Mode You can choose the way you want the Main Menu to be displayed choose between "text, icon or scroll". Please change it in Settings / System / Customize / mainmenu list option - CT News Feed Clarke-Xtrend FEED Contents : - Driver - Games - picons - Plugins - Setting - Skins - systemPlugins - Update Plugins added CT-Panel AudioSync CutListEditor EPGImport GlassSysUtil GraphMultiEPG MediaPlayer MediaScanner PicturePlayer Tuxtxt WebMedia Backup-Suite Specialised version of MultiQuickbutton for Clarke-Tech ET9000 can be downloaded from CT feed. Code: 1. Zurück <: Zap History - 2. Vor >: Zap History + 3. Farbtasten Rot: Rot (lang): Grün: Auswahl Optionskanäle Grün (lang): Gelb: Audio-Einstellungen Gelb (lang): Blau: Erweiterungsmenü Blau (lang): 4. GUIDE: Programmübersicht GUIDE (lang): 5. INFO (i): Programmübersicht INFO (i) (lang): 6. MENU (Lang): 7. EXIT: Infobar 8. OK: Infobar 9. Steuerkreuz Runter: Kanalliste Links: Sender zur\'fcck - Rechts: Sender vor + Auf: Kanalliste 10. VOL. +/-: ** 11. P+: Kanalliste P-: Kanalliste 12. Filelist: Aufnahmen Filelist (lang): 13. Playlist: Playlist (lang): 14. zurückspulen << : 15. vorspulen >>: 16. Play/Pause >II: Starte Timeshift 17. REC: Aufnahmemenü REC (lang): 18. Slowmotion I>: *** 19. Stop: Stoppe Timeshift 20. Timeshift: Starte Timeshift Timeshift (lang): Stoppe Timeshift 21. search: serach (lang): 22. Mark: Mark (lang): 23. Timer: Timer (lang): 24. Vkey: Aufnahmen Vkey (lang): 25. PIP: Bild in Bild PIP (lang): Tausche Bild in Bild 26. TEXT: Teletext TEXT (lang): 27. subtitle: Untertitel subtitle (lang): Untertitel-Einstellungen 28. AUDIO: Audio-Einstellungen AUDIO (lang): 29. TV: TV TV (lang): 30. Help (lang): 31. RADIO: Radio RADIO (lang): Special thanks: pcd (Main Developer) wallie2000 (Image-Support) Clarkemaster(Skins,Bootlogos) All Betatesters (Coolman, CoolST, icewaere, csm, dispatcher, tam2010, z-pg-3, Biki3, janosch ) mogli123 (MQB). Pedro_newbie (image backup plugin) Pli team (for the image background code) All the other code developers and plugin developers a big thanks to ClarkeBoss [hideguest]clarke-xtrend-et9x20111027133804_usb.zip data_et9x00-bootloader.zip[/hideguest]
kladovchk: DreamboxUK_v2.1_ET9x00, ET5x00 Base: OpenPLi 2.1 Enigma: 01-11-2011 Kernal: 3.0.3 r5 Drivers: 29-10-2011 Skins:- Magic Magic-EHD Cams:- CCcam 2.2.1 Plugins / Extensions:- AudioSync WebInterface CCcamInfo v1.3c CrossEPG SVN 306 OpenVPN Graphical Multi-EPG Device Manager Backup Manager File Installer System Tools & Info Bouquet Updater Picon Updater Swap Manager Cron Manager VirtualZap lots of enigma2 updates more uk regions added to bouquet updater, some removed removed licher picons from picon updater dts downmix added ntfs support added smargo drivers added more wireless drivers added Button Mappings removed, install multiquickbutton from the addons panel and setup to how you like it + more... [hideguest]DreamboxUK_v2.1_ET9x00.rar[/hideguest]
kladovchk: OpenPli 2.1 Linux3.1.0 beta Image 06.11.2011 ClarkeTech-Xtrend-Team & OpenPli Team proudly presents World Exclusive OpenPli2.1 beta Image based on Linux3.1.0 for ET9x00 little overview: - framebuffer console - - vtuner fixes - - Improved wifi, dvb-t, dvb-s2 usb devices - - and much more !!! - And again, next strike from ClarkeTech-XTrend-Team & OpenPli Team ! --- This is only a Beta Version plz report all bugs what you found here --- --- Es handelt sich noch um eine Betaversion, daher bitte jegliche Fehler wo ihr findet hier Posten danke --- !!! Needs the latest Bootloader (30.09.2011) from here LINK !!! !!! Benötigt den aktuellen Bootloader (30.09.2011) von hier LINK !!! Special Thx to: wallie2000, tam2010, dispatcher, Biki3, z-pg-3, janosch, Pcd, CoolST, clarkemaster, memo and all other devs! [hideguest]OpenPLi-2.Kernel-3.1.beta-et9x20111106_usb.zip[/hideguest]
kladovchk: BackupSuite для ET9000 Here is a new version of the backup suite based on a new concept. The code had to be cleaned up, because it was hard to let it run cleanly. Some things you should know: - First remove the old version that can be done as follows: Menu -> Remove red button Plugins - -> Extensions> system plugins -> backup suite <language> If this does not work, you can try it with telnet opkg remove "eni gma2-plugin-system-backup suite *" - force-removal-of-dependent-packages or opkg remove "eni gma2-plugin-system-backup suite *" - autoremove You should look on the box if the folders are gone, they are usually in / usr / lib / eni gma2/python/Plugins/SystemPlugins/Combi-HDD-Backup / and / usr / lib / eni gma2/python/Plugins/SystemPlugins/Combi-USB-Backup / These two folders should now be gone. Restart after uninstalling the box please once again with "Restart eni gma2" Then install the new version. The new folder for the backup suite can be generated in / usr / lib / eni gma2/python/Plugins/Extensions/BackupSuite-HDD / and / usr / lib / eni gma2/python/Plugins/Extensions/BackupSuite-USB / There are now only one package called backup suite (eni gma2-plugins-extensions-backupsuite_ <version>, currently V6.7), there are no more different languages. Please feel free you to test this new version, I'm open to suggestions and changes to the German translation. A final word: this version needs to install an Internet connection to necessary files such as. mkfs.ubifs reload. Вот новая версия пакета резервного копирования на основе новой концепции. Код должен быть очищен, потому что было трудно дайте ему поработать чисто. Некоторые вещи вы должны знать: - Сначала удалите старую версию, что можно сделать следующим образом: Menu -> Красная кнопка плагинов - Удалить - ->Extensions - Расширения> system plugins - Система плагинов -> резервного копирования пакета <language> Если это не работает, вы можете попробовать его с Telnet opkg удалить"eni gma2-plugin-system-backup suite *"- форс-удаления, из-зависимой-пакеты или opkg удалить "eni gma2-plugin-system-backup suite *" - autoremove Вы должны смотреть на поле, если папки нет, они, как правило, в / usr / lib / eni gma2/python/Plugins/SystemPlugins/Combi-HDD-Backup / и / usr / lib / eni gma2/python/Plugins/SystemPlugins/Combi-USB-Backup / Эти две папки должна исчезнуть. Перезагрузка после удаления окна пожалуйста, еще раз с "Restart eni gma2" Затем установите новую версию. Новую папку для резервного копирования пакета могут быть сформированы в / usr / lib / eni gma2/python/Plugins/Extensions/BackupSuite-HDD / и / usr / lib / eni gma2/python/Plugins/Extensions/BackupSuite-USB / Есть в настоящее время только один пакет, называемый резервный набор(enigma2-plugins-extensions-backupsuite_ <version>, currently V6.7), Есть не более разных языках. Пожалуйста, не стесняйтесь вам протестировать новую версию, я открыт для предложений и изменений в немецком переводе. Последнее слово: эта версия требует установки Интернет-соединения с необходимыми файлами, такие как. mkfs.ubifs перезагрузки. [hideguest]enigma2-plugin-extensions-backupsuite_6.7_mipsel.rar[/hideguest] Here's a new version, with better localization (umlaut allowed!) Also available after the next nightly build Вот новая версия, с лучшей локализации (умляут допускается!) Также доступны после очередного ночные сборки [hideguest]enigma2-plugin-extensions-backupsuite_6.9_mipsel.rar[/hideguest] BackupSuite 7.0 And yet another new version, version 7.0. This time some corrections in the languagefile(s) and an new translation, French! (Thanks Demosat!) It could be that some й и б ь etc leters are still missing because of the first versions a wrong code was used and the special character got lost in translation. If there are persons who want to add another language feel free, in the folder locale is a .po file with the name Default.po, this file can be used to add a language. The file can be edited by any texteditor or with the program Poedit which can make a translated file (.mo) Poedit can be found at: Here I also forgot to thank Biki3 and Bonsai Baum for their German translations. The new version is attached at the end of this message. Here are some screens from the French version [hideguest]enigma2-plugin-extensions-backupsuite_7.0_mipsel.rar[/hideguest]
kladovchk: driver 3.0.3 linux ET9000, 9200 drivers 2011-10-29 [hideguest]data_et9x00-drivers-3.0.3-20111029.zip[/hideguest] New driver 3.1.0 linux ET9000, 9200 drivers 2011-11-05 [hideguest]data_et9x00-drivers-3.1.0-2011-11-05.rar[/hideguest] copy and replace the 4 extracted Files here: /lib/modules/2.6.31-3.2/extra reboot. Установка: Скопируйте и замените 4 извлеченных файла, здесь: /lib/modules/2.6.31-3.2/extra Перезагрузите
kladovchk: ETTimeDrift ETTimedrift Version 1.2 1.2 - Neu: Englisches Grundpaket mit deutscher Lokalisierung. [hideguest]enigma2-ettimedrift_1.2-20110904_mipsel.rar[/hideguest]
kladovchk: Webbrowser - Integrate red button function. For the skins there must be add an icon which is linked to: <convert type="ServiceInfo">HasHBBTV</convert> - Compatible with allmost all mouse and keyboards - Youtube player ( http://www.youtube.com/xl ) - Mediatheek supports ( NPO Netherland, ZDF/ARD/PRO7/RTL Germany and much more) - Online radio with tuneinradio - Weather and rain forcast - Traffic jams with TOMTOM and lot lot more !!!!!!! The webbrowser can been found (after installation and reboot of the box) under the blue button. With the menu button it opens a window where you can choose the mode or bookmarks. TV Channels which have a hbbtv portal can easily been opened through red button. Need help in webbrowser use then help button The bookmarks can been found in directory /etc/enigm@2/ - Интеграция красную функциональную кнопку. Для шкуры должны быть добавить значок, который связан с: <convert type="ServiceInfo"> HasHBBTV </ конвертировать> - Совместимость с allmost все мыши и клавиатуры - Youtube игрока (http://www.youtube.com/xl) - Mediatheek поддерживает (НПО Нидерланды, ZDF/ARD/PRO7/RTL Германии и многое другое) - Интернет-радио с tuneinradio - Погода и дождь погоды - Пробки с TOMTOM и многое многое другое !!!!!!! Браузер можно было найти (после установки и перезагрузки коробки) под синюю кнопку. С помощью меню кнопки открывается окно, где вы можете выбрать режим или закладкам. Телеканалы, которые hbbtv портала может с легкостью был открыт через красную кнопку. Нужна помощь в использовании браузер затем кнопку справки Закладки можно было найти в каталоге / и т.д. / enigm @ 2 / [hideguest]enigma2-plugin-extensions-et-webbrowser_1.0-r0_et9x00.ipk.rar[/hideguest] Hey, you've built a fix, the function of the RedButton browser v1.0 also works with multi-button quick V2.8.1 The red button can, of course, by then no longer be adjusted MQB! Fix for multi-button quick V2.8.1 RedButton that works on new web browser v1.0 After this fix, you cannot change anymore on RedButton MQB. First MQB281_Webbrowser_v1.0.zip unpack and copy to "/ usr / lib / enigme 2/python/Plugins/Extensions/MultiQuickButton @ / '/ replaced. Second Reboot [hideguest]MQB281_Webbrowser_v1.0.zip[/hideguest]
kladovchk: MultiQuick button: 2.8.2 (for the et-serie) 2.8.2 info: - Info: on / off book now can be used without a restart and will be equal change in re-read - Ok / exit: on / off can be used without the book now restart - On the key 3 in the main menu is now: Query keys: on / off so it is now possible if not for a MQB occupied key starts the query like this should be documented that goes without having to restart - Is the info about yourself on the "i / info" button in the Main Menu-MQB no longer as before on the 3 (yes interested but eh no * gg *) - Advanced "4:3 / non-linear scaling, etc. .." (Thank you Bonsai Baum) - Press the "rewind <<" now works properly - New function "Play / Pause time shift" contain all the buttons (thanks PinBot) New-function "HbbTV (Red Button)" contain all the buttons your existing settings to version 2.8.1 to 2.8.2 this does not be used to restore / use ... adapted for co-standard (et9x00, et5x00, et6x00) ATTENTION: who wants to use the multi-button quick here its previous version must be installed MQB x (if available) please first uninstall ps all changed keys / assignment / assignments have not influence on the behavior / control the plugins / programs themselves ... that is, if I as a bsp. on the button "stop" me "teletext" lege and then for example in the "Media Player" RECOURSE am the taste as "Stop" function get Note: If you have already made adjustments to them after overwriting the files will be made again! my thanks for the existing MQB source goes to "emanuel", "Renew" "Plnick" and of course the entire team-et here as well as individual user here in the forum ... 2.8.2 info: - info:an/aus kann jetz ohne restart verwendet werden und wird gleich bei änderung neu eingelesen - ok/exit: an/aus kann jetz ohne restart verwendet werden - auf der taste 3 im hauptmenü befindet sich jetzt: Tastenabfrage: an/aus damit ist es nun möglich ob MQB bei einer nicht belegten taste die abfrage startet wie diese belegt werden soll das geht auch ohne restarten zu müssen - die about info befindet sich jetzt auf der "i/info" taste im hauptmenü-MQB also nicht mehr wie vorher auf der 3 (interessiert ja aber eh keinen *gg*) - Erweiterte "4:3 / Skalierungen NichtLinear usw..." (danke Bonsai Baum) - Taste "Zurückspulen <<" funktioniert jetzt richtig - neue Funktion "Play/Pause Timeshift" für alle Buttons enthalten(danke PinBot) -neue funktion "HbbTV (Red-Button)" für alle Buttons enthalten eure vorhandenen 2.8.1 settings können in dieser 2.8.2 version nicht wieder eingespielt/verwendet werden ... angepasst für die et-serie (et9x00, et5x00, et6x00) Tasten die leider nicht/oder auch noch nicht funktionieren (zwecks fehlender Key ID zuweisung) sind: I> slowmotion play taste ACHTUNG: wer das MultiQuickbutton hier benutzen möchte muss seine vorherige installierte MQB Version x (falls vorhanden) bitte erst deinstallieren p.s alle veränderten tasten/belegung/zuweisungen haben keinerlei einfluss auf das verhalten/steuerung der plugins/programme selbst ... das heisst wenn ich als bsp. auf die taste "Stop" mir den "teletext" lege und dann bspw. im "Mediaplayer" bin bliebt die taste als "Stop" funktion erhalten Hinweis: Wenn man bereits Anpassungen vorgenommen hat, müssen diese nach dem Überschreiben der Dateien erneut vorgenommen werden! mein dank für die vorhandene MQB source geht an "emanuel", "ReneW", "plnick" und natürlich dem gesamten et-team hier so wie auch einzelne user hier im forum... [hideguest]enigma2-plugin-extensions-et-multiquickbutton_r2.8.2_mipsel.ipk[/hideguest] BackupSuite 7.3 Еще одна новая версия BackupSuite, версии 7.3 теперь поддерживает польский язык. Поддерживаемых языков теперь: английский (по умолчанию), голландском, французском, немецком, польском и русском языках. [hideguest]enigma2-plugin-extensions-backupsuite_7.3_mipsel.ipk[/hideguest]
kladovchk: ET9x00 HDF-Teamimage v4.3 based on OpenPLi2.1 vom 25.11.2011 So hier dann mal das aktuelle Bastelimage 4.3 von uns. Es handelt es um das HDF-Teamimage 4.2 komplett aktualisiert. Update Stand ist vom 25.11.2011 20:57 Uhr. Enthalten sind die aktuellsten Versionen der installierten Plugin und das HbbTV Plugin. Außerdem ist das neue OpenWebif dabei. Zu erreichen über http://IP-Adresse_der_Box:8088. Skin ist der army.pli in einer gemoddeten Version mit HbbTV Anzeige und ein paar anderen kleinen Sachen. Die Picons können über die HDF-Toolbox nachinstalliert werden. Именно к команде Изображение HDF 4,2 полностью обновлен. Дополнение тактовой 11/25/2011 20:57 'ов. Включены последних версий установленных плагинов и плагинов HbbTV. Кроме того, новые OpenWebif есть. Доступ через http://ip-adresse_der_box:8088/. Кожа модифицированные версии с army.pli HbbTV дисплей и некоторые другие мелочи. Picons может быть установлен из HDF-панели инструментов. [hideguest]et9x00_hdfreaks.v4.3_PLi2.1_25112011.zip[/hideguest] FanSetup ver.3.0 Plug-mode parameters of the fan ET9000. There was an additional mode "combination". Where you can specify a specific time on / off / auto. example: Quiet hours 15:00 to 16:00, the fan is turned off. Plug-режиме параметры вентилятора ET9000 Существовал дополнительный режим "Комбинация". Где вы можете указать определенное время вкл / выкл / авто. пример: Тихий час с 15:00 до 16:00, вентилятор выключен. [hideguest]enigma2-plugins-systemplugins-fansetup_3.0_mipsel.ipk[/hideguest]
kladovchk: В общем имидж нормальный, всё необходимое есть. Эмулятор mgcamd работает Добавил в папку key newcamd.list и добавил в SoftCam.Key несколько biss ключей, например на Astra 1G @ 31.5° East : F 1B5E1FFF 00 хххххххххххххххх ; TV Centr International (31.5°E) F 1B5E1FFF 01 хххххххххххххххх ; TV Centr International (31.5°E) F 1b591b59 00 хххххххххххххххх ;First Ukr (31.5°E) F 1b591b59 01 хххххххххххххххх ;First Ukr (31.5°E)
kladovchk: HDF-Teamimage v4.4 27.10.2011 ET9x00 HDF-Teamimage v4.4 based on OpenPLi2.1 vom 27.11.2011 So hier dann mal das aktuelle Bastelimage 4.4 von uns. Es handelt es um das HDF-Teamimage 4.2 komplett aktualisiert. Update Stand ist vom 27.11.2011 12:24:45 Uhr. Enthalten sind die aktuellsten Versionen der installierten Plugin und das HbbTV Plugin. Außerdem ist das neue OpenWebif dabei. Zu erreichen über http://IP-Adresse_der_Box:8088. Skin ist der army.pli in einer gemoddeten Version mit HbbTV Anzeige und ein paar anderen kleinen Sachen. Die Picons können über die HDF-Toolbox nachinstalliert werden. Bedienung wie hier beschrieben: HDF-Teamimage v4.2 16.10.2011 - Timeshift Pfad auf default eingestellt - aktuelle Updates PLi und Plugins - HbbTV auf ARD & ZDF funktioniert wieder - Skin army.mod Änderungen - aktuellste Version vom OpenWebif Viel Spass damit. [hideguest]et9x00_hdfreaks.v4.4_PLi2.1_27112011.zip[/hideguest]
kladovchk: Open AAF Prerelease 1.12.2011 ET 9X00( основанный на базе OpenPLi) Imageinformationen: Basis: - OpenPLi - OpenViX - OpenEmbedded Eigenes GIT (Online Updates möglich) Enthalten: - Aktueller Kernel 3.1.0 - HbbTVSkin (DMConcinnity-HD Mod-Skin) - HbbTVLite Skin (DMConcinnity-HD Mod-Skin) - OpenAAFPanel - Permanent Timeshift - Media Player - WebIfMod - KeymapAuswahl (Standard, Eigene, Neutrino folgt) - HDMI CEC - DVD-Player - Einstellung der Tastenbelegung - Eigener Plugin Feed - Blue Panel - GUI Deckkraft veränderbar - BlindScan - Swap Manager - PiconsAstra 19,2 und die deutschsprachigen Sender auf Hotbird 13,0 - Fancontroll - Aktuelle Settings Astra 19,2 und Hotbird 13,0 , 23 und 28 Grad - „Cool EPG“ Serie Features: - Skin normal und Skin Lite im Menu selektierbar (inkl. 2nd Infobar) - ET Webbrowser auf dem Feed (Red Panel integriert) - Online Update mit Paketanzeige - Media Player im WebIf - Softcampanelim Webif Fakten zum Image Da wir ja das RAD nicht neu erfinden und es schon großartige Images gibt für die Receiver, haben wir die Grundlagen schon von einigen Klasse Open Teams Übernommen. Wir möchten uns hier schon mal bedanken für eure erstklassige Arbeit was ihr in der Vergangenheit gemacht habt und was ihr noch in Zukunft alles macht. Ohne eure Vorarbeit und Einsatz würde es kein openAAF Image geben. Danke geht an: openpli Team, für das Grund Konzept und die super Integration der Hardware Modelle. openVix Team, für das GUI Modding und Feature Konzept und den vielen kleinen interessanten Ideen. openEmbedded, ohne deren Build Umgebung, wäre nichts möglich gewesen. Opendreambox, für die GUI 3.1. eopenplugins, diese Idee haben wir mit Freude aufgenommen, wenn wir einmal so weit sind kommt auch was von uns. Zum Image: (Hardware) Image sind für folgende Box Modelle in Planung: Xtrend/Clarktech Image: et9x00 Box Modelle CT9000, CT9100, ET9000, ET9200 Image: et5x00 Box Modell: ET5000 Image: et6x00 Box Modell: ET6000 VuPlus Image: vusolo Image: vuuno Image: vuduo Image: vuultimo DreamMedia Image: dm8000 Image: dm7020hd Image: dm800se Image: dm800hd Image: dm500hd Zum Image : (Software) Basiert auf Grundlage openPli/openVix/opendreambox als eigener Fork dadurch sind wird in der Lage eigene Anpassungen durchzuführen und unseren SH4 Kenntnisse auch im Mipsel Umfeld umzusetzen. Bekannte GUI 3.1 mit Erweiterungen und Anpassungen (Infos folgen). Bereitstellung: Eigener FEED mit entsprechenden Plugins wird gleich zu Beginn für die Images bereit stehen. Images wird es wenn möglich und TEST Hardware zu Verfügung stand für die in Planung stehenden Boxen im Dezember erfolgen. Zum Team: Entwicklung: AAF DEV Team, besonderen Dank geht an Captain, Black 64 und babsy98. Beta Testing: AAF Beta Team, besonderen Dank geht an janojano, husky, dridrudradro Grafik und Design: xup Qualitätskontrolle: neipe Danke an alle die mitgeholfen haben, einen besonderen Dank an Clarkeboss. Euer AAF Team Zum Download in der Database !! ACHTUNG neuesten Bootloader (29.09.2011) verwenden !! !! Für Zusatzfeed, bitte das angehängte ipk installieren !! !! ACHTUNG Fullbackup noch ohne Funktion !! [hideguest]openaaf-1.0-et9x00-20111130_usb.zip[/hideguest]
kladovchk: В данном имидже текущие настройки Astra 19,2 и 13,0 Hotbird, 23 и 28 градусов. Для того чтобы добавить недостающие сателлиты заходим на сайт http://www.satellites-xml.eu/ и создаём файл satellites.xml нужных нам спутников, копируем в /etc/enigma2/ . .... и получаем ET-Toolbox v0.44 - Notepad + + (добавлена новая версия) 5.9.6.2 - (Добавлена новая версия) 2:35 Dreamset - (Добавлена новая версия) FileZilla 3.5.2 - 15-10-2011 добавлен драйвер - 30-10 - 2011 добавлен драйвер [hideguest]ET-Toolbox v0.44.zip[/hideguest]
kladovchk: DreamboxUK_v2.1.1 GENUINE BOXES ONLY Xtrend ET5x00, ET6x00, ET9x00:- Base: OpenPLi 2.1 Enigma2: 30-11-2011 Kernal: 3.1.0 r6.8 Drivers: 29-10-2011 Skins:- DBUK-HD (default) PLi-HD Cams:- CCcam 2.2.1 Plugins / Extensions:- AudioSync OpenWebIf (e2openplugins) WebInterface CCcamInfo v1.3c CrossEPG (e2openplugins) OpenVPN 2.2.1 Graphical Multi-EPG Device Manager Backup Manager File Installer System Tools & Info Softcam Manager Bouquet Updater Picon Updater Swap Manager Cron Manager VirtualZap EPG Search enigma2 updates enigma2 plugin updates another region added to regional bouquet updater new OpenVPN 2.2.1 new Updated OpenVPN Plugin (with more options) added EPG Search Includes new OpenWebif (From E2OpenPlugins), the original webinterface still needs to be installed as the bouquet updater relys on the api commands which the new openwebif doenst have yet. CrossEPG (is now From E2Openplugins) new DBUK-HD skin (modified an existing skin) new PLi-HD skin removed old graphical multi-epg + added new graphical multi-epg [hideguest]DreamboxUK_v2.1.1_ET9x00.rar[/hideguest]
kladovchk: Open AAF Prerelease 6.12.2012 ET 9X00 Full Image 6.12 mit alles fixen der letzten zeit + enthalten sind alle PLI Updates bis heute + enthalten sind alle AAF Image fixe wie hier im Thema beschrieben kann sein das ein zwei Updates via Online Update nicht mit kommen einfach dann neu Flashen [hideguest]openaaf-1.0-et9x00-20111206_usb.zip [/hideguest]
kladovchk: New VIX Image ET9x00 - v2.3 07/12/2011 - Open ViX 2.3 From VIX Team Enigma: 07-12-2011. Enigma Plugins: 07-12-2011. GCC Version: 4.4.4. Kernel Version: 3.1.0. Drivers: 2011-11-05. This image requires the latest bootloader (attached to this post) to be flashed. This is because Xtrend have changed the way the drivers work. So, before updating your image, you will need to first flash the bootloader, then flash the new image. Flashing of new bootloader only takes a few seconds, so once flashing's completed, then just turn off the box, transfer the new image to the usb stick, and flash with that. Also, it is recommended to NOT use older images with this new boot loader, as this may result in a bricked box. Because of a lot of changes behind the scenes of the image and building, you will not be able to perform an online update. A full flash is required for this version of ViX image. This revision of the image has undergone many different builds, hours and hours of coding/fixing, and we hope that you are now happy to reflash with the latest ViX image! Team ViX Enchancements New Features Updated to kernel 3.1.0 - This new kernel is much faster and better than the previous kernel, and finally you all get to test it if you held off updating to other images. If you did update, you can finally come back to the ViX image VFD Icons fully working - Unique to the ViX image. The VFD icons on the front of the box are working correctly how the manufacturer intended them. Seperate icons for Timeshift (rather than using the recording icon), Sat icons, LAN icon, USB icon and HDD icons, all working perfectly. View the pictures below to see what they look like. Added items to the Information Screen - Added Devices and System Information to Menu -> Information. In Devices, you get all the information about connected devices on your box (HDD, USB and Network Shares), and System Information will show you your memory on your box (Swap, Free memory etc). See screenshots below for more information. Added OSD Settings - This replaces the overscan option within the ViX image. Go to Menu -> Setup -> System -> OSD -> OSD Setup, and ensure the screen fills your TV set exactly to ensure that all menu options are shown correctly for your TV. Updated Blindscan - Now, ET9000 and Vu+ Uno both have blindscan ability incorporated in to the image. And, best of all, a nice simple scan routine for it. You can choose to scan all horizontal and vertical polaritys, as well as high and low bands all in one pass. Save having to run the blind scan for each individually :thumsbup:. Added support for HDMI-CEC - This image now allows you to control your box using your tv remote. Remember, this is still experimental at the moment, and can work differently between different brands of TV makes/models. Added uShare - Allow the box to be detected by your DLNA devices that support this protocol. This can be configured under Menu -> Setup -> System -> Network -> uShare Setup. Added MiniDLNA - Same as uShare, but some people were having problems with uShare, so we have added a different version for people to use. Added AFP - The Apple Fileshare Protocol makes it easy for your OSX devices to find your box and use the box natively within the OS. This can be configured from Menu -> Setup -> System -> Network -> AFP Setup. Added EPG Automatic Refresh - This is useful for members who keep a single EPG datasource on a network share with multiple boxes. In Menu -> Setup -> System -> EPG -> Settings, you have the option to choose a network location (as long as configured within the Mount Manager). If you use this, you might want to update the EPG data from this location automatically. So now you can using the Automatic Refresh option. Added Automounts option - This allows the box to automatically recreate network mounts. If you've had times where the NFS of CIFS server has been restarted, or lost power etc, then you'll know that your box cannot access this network share. Well, as long as you have configured the share through the Mount Manager, then you can configure the Automount to automatically remount the share as often as you like by going to Menu -> Setup -> System -> Network -> Devices -> MountManager. Default Skin Change - The Default skin has been changed from ViX HD to ViX Night HD. This is a new ViX skin that has been developed for those who want a darker skin for their image. See the screenshots below for comparisons between the two. If you prefer the old ViX skin, it can still be downloaded from the download server, and is now called ViX Day HD. Please report any skin issues you may find with the ViX Night HD skin. We think we have them all covered, but can't be too sure... Many plugins translated/made translatable - Allows the plugins to display correctly the information in your own language (as defined on original setup). Deleted a number of plugins - Due to the "war on licences", a number of plugins whose license has changed, has been reverted to the non-licensed version of the plugin, or had to be removed from the image indefinitely. Added seekbar functionality to the image - Allow you to seek within a recording playback to where you would like to be within the playback. To utilise this, please hold down the << or **** buttons on your remote, and the seekbar will appear at the top. Use the arrow keys on the remote to choose where you would like to seek to in the playback, and press OK to start playback from this point. Added Image Download to Image Manager - This allows you to download the latest full image from the server, and flash it to your box (Vu Only). To access this, go to the Image Manager from with ViX menu, and press the help button. This will list all available images to download. Added playback support for FLV files - Now you can add FLV files to your recordings drive and play them natively within the system. Lots more under the hood updates/enhancements - A few menu options and screens have become more integrated to their respective menus. For example, the Recording Paths menu is no longer required, as Timeshift Path is defined in Timeshift Setup, and Recording Path in Recording Setup. Fixes Tweaked SoftCam manager. Corrected a number of plugins. Updated network components, including better support for WiFi. Updated translatability; updated German & Dutch translations. Hidden several ViX-core functions from the plugin-browser. Better handling of SWAP partitions by the Mount Manager. Tweaked TimeShift Code. Remove SD/HD split from ChannelSelection as it was buggy. Magic skin updates MenuSort fix. Button Mappings Short Red** & *** - Show current channel EPG info (ViX Single EPG). Long Red*** - Show current event. Short Green** & *** - Timers. Long Green*** - AutoTimer Timers. Short Yellow*** - EPG Search. Long Yellow*** - IMDB Database. Short Blue - Extensions. Long Blue*** - Plugins Menu. EPG - Opens ViX EPG. Left/Right** - Opens ViX QuickEPG. Left/Right** - Opens ViX QuickEPG. Up/Down** - Open Full Screen Channel List. Long Up/Down** - Open Simple TV List. TV Button** - Open Full Screen Channel List. Long TV Button - Open Bouquets List. ** Can be changed in ViX Menu *** Can be turned off in ViX Menu Known Bugs Nope Special Thanks rytec - for his continued support. zoka.cc for his Picon sets Coolman and all other developers for their plugins used in the feeds of this image. All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working [hideguest]ViX-2.3.GM-et9x00_usb.zip[/hideguest]
kladovchk: Open AAF Prerelease 11.12.2011 ET 9X00 Imageinformationen Fakten zum Image: Da wir ja das RAD nicht neu erfinden und es schon großartige Images gibt für die Receiver, haben wir die Grundlagen schon von einigen Klasse Open Teams Übernommen. Wir möchten uns hier schon mal bedanken für eure erstklassige Arbeit was ihr in der Vergangenheit gemacht habt und was ihr noch in Zukunft alles macht. Ohne eure Vorarbeit und Einsatz würde es kein OpenAAF Image geben. Danke geht an: openpli Team Für das Grund Konzept und die super Integration der Hardware Modelle openVix Team Für das GUI Modding und Feature Konzept und den vielen kleinen interessanten Ideen openEmbedded Ohne deren Build Umgebung, wäre nichts möglich gewesen Opendreambox Für das GUI eopenplugins Diese Idee haben wir mit Freude aufgenommen, wenn wir einmal so weit sind kommt auch was von uns. OpenAAF Image Inhalt: HbbTVSkin (DMConcinnity-HD Mod-Skin) HbbTVLite Skin (DMConcinnity-HD Mod-Skin) OpenAAF Panel Permanent Timeshift Media Player WebIf Mod Keymap Auswahl (Standard, Eigene, Neutrino folgt) HDMI CEC DVD-Player Einstellung der Tastenbelegung Eigener Plugin Feed Blue Panel (PPanel) GUI Deckkraft veränderbar BlindScan Swap Manager PiconsAstra 19,2 und die deutschsprachigen Sender auf Hotbird 13,0 (nur ET9X00 und ET6X00) Fancontrol Aktuelle Settings Astra 19,2 und Hotbird 13,0 , 23 und 28 Grad „Cool EPG“ Serie WLAN-Treiber und vieles mehr… AAF Specials: Skin normal und Skin Lite im Menu selektierbar (inkl. 2nd Infobar) ET Webbrowser auf dem Feed (Nur für ET9X00 und ET6X00!) Online Update mit Paketanzeige Media Player im WebIf Softcampanel im WebIf Eigener Feed (Online Updates möglich) Standard Farbtasten: Blue Key kurz: Blue Panel (PPanel) Blue Key lang: Red Key kurz: HbbTV sofern auf dem Sender, sonst das OpenAAF Panel Red Key long: Sofern aktiviert das Softcam Panel Yellow Key kurz: Audio Einstellungen Yellow Key lang: Green Key kurz: Optionskanäle sofern vorhanden, sonst Erweiterungen Green Key lang : Seitenverhältnis (Aspect Ratio) Hardware: Image sind für folgende Box verfügbar: Xtrend/Clarktech Image: et9x00 Box Modell: ET9x00 Software: Basiert auf Grundlage von openPli/openVix/opendreambox als eigener Fork dadurch sind wird in der Lage eigene Anpassungen durchzuführen und unseren SH4 Kenntnisse auch im Mipsel Umfeld umzusetzen. Bekannte GUI mit Erweiterungen und Anpassungen. Bereitstellung: Eigener FEED mit entsprechenden Plugins wird gleich zu Beginn für die Images bereit stehen. Zum Team: Entwicklung AAF DEV Team: Besonderen Dank geht an Captain, Black 64 und babsy98 Beta Testing AAF Beta Team: Besonderen Dank geht an janojano, husky und dridrudradro Grafik und Design xup Qualitätskontrolle neipe Skins Speedy1 und Krauss Danke an alle die mitgeholfen haben und einen besonderen Dank an Clarkeboss. Euer AAF Team ! Внимание всегда использовать последний загрузчик! [hideguest]openaaf-1.0-et9x00-20111211_usb.zip[/hideguest]
kladovchk: Drivers Update 12.12.2011 Changelog: -DTS downmix support -fix AC3+/DDP passthrough support -fix separate 50hz/60hz videomodes, autoselect based on media format -fix keeping correct 3dmode after videmode switch -fix keeping correct PiP position after videomode switch -scaler sharpness: split into pep_scaler_sharpness, pep_hscaler_sharpness, pep_deinterlacer_sharpness -fix aspect ratio detection for certain media formats. -fix aspect ratio for PiP, PiG -fastforward/rewind (TS) -add pep_digital_contour_removal -fix initial audio playback after startup Do not install on Clarke-Xtrend Support V3 Image! [hideguest]et-dvb-modules_3.1.0+r6.0_et9x00.ipk.rar data_et9x00-drivers-3.1.0-20111209.zip [/hideguest]
kladovchk: Clarke-Xtrend Support Image V4 Important: This image is based on Linux 3.1. Therefore it requires the latest bootloader 30.09.2011! and first install procedure necessary for the Linux 3.1 based openpli et9x00 image. Also important - please read the Readme in CT Panel for image use instructions Clarke-Tech Enhancements for the completely modular Image - Clarke-Xtrend HD Lava Skin with pig (picture in graphic) in many menus - Clarke-Xtrend Bootlogos and Radio Logo - Clarke-Xtrend Panel - optional Secondinfobar (show more detailed infos on tv-screen.) - Best Sysinfopanel (complete overview of systemparameters) - HDMI-CEC Support via Plugin - WLAN fixes and support for 80211b/g/n Ralink, Realtek, Carl based USB-Dongles (rt2800USB, rtl871x, AR9170) - Running "broken" Shellscript (as Cronjobs) will work - Acousticpatch (needs a HDD that supports acoustic parameter consult HDD manufacturer for this) Highlights: -Clarke-Xtrend Webbrowser HbbTV. This image fully supports the unique Webbrowser HbbTV for more info see the readme or visit our forum. -Daemon Manager. For information - a daemon is a computer program that runs in the background. The daemon requires a start/stop script - the script must be executable (chmod 755), placed in /etc/init.d and the name must start with "dmon." Switch Mode You can choose the way you want the Main Menu to be displayed choose between "text, icon or scroll". Please change it in Settings / System / Customize / mainmenu list option - CT News Feed New: Linux version 3.1.0 Drivers of 12.12.2011 optional Secondinfobar Clarke-Xtrend FEED Contents : - Driver - Games - picons - Plugins - Setting - Skins - systemPlugins - Update Plugins added CT-Panel AudioSync CutListEditor EPGImport GlassSysUtil GraphMultiEPG MediaPlayer MediaScanner PicturePlayer Tuxtxt WebMedia Backup-Suite WebLinks adjustments: 1. you can adjust the optic from the menu menu - setup - system - customize please change to the entry: "mainmenu list option". use one of the following three options: "icon scroll" "icon thumbs" or "text" the text-option looks like CT 1.1-Image. It gives no pig (picture in graphic) more with the entry "text". 2. You can use the new secondinfobar, to show more channel-infos. The normal infobar looks better, with not so many infos. menu - setup - system - customize Please change to; "Show second infobar" You can select: "None" "No timeout" (permanent display, you can blend it out with the ok-key.) "1 - 10 seconds" how long you wish. You can change the size from the secondinfobar in the menu: "Second infobar size" you can select between maximum or minimum. After that and to see the change, please make a reboot. Update via Clarke-Tech Server Feed Special thanks: pcd (Main Developer) wallie2000 (Image-Support) Clarkemaster(Skins,Bootlogos) All Betatesters (Coolman, CoolST, icewaere, dispatcher, tam2010, z-pg-3, Biki3, janosch) mogli123 Pedro_newbie (image backup plugin) Pli team (for the image background code) All the other code developers and plugin developers a big thanks to ClarkeBoss [hideguest]clarke-xtrend-et9x20111217171654_usb.zip (54.77 MB)[/hideguest]
kladovchk: Open AAF Prerelease 17.12.2011 ET 9X00 Image information: Image Information Facts about the image: As we invent the RAD is not so new and there are already great images for the receiver, we have taken some of the basics already open class teams. We would like here to thank you for your ever first-class work what have you done in the past and what you have in the future all makes. Without your homework and use there would be no OpenAAF image. Thank you goes to: OpenPLi team For the basic concept and the super integration of hardware models openVix team Modding for the GUI and feature concept and the many small interesting ideas OpenEmbedded Without their build environment, would not have been possible Opendreambox The GUI eopenplugins This idea we have received with joy when we are also what one gets that far from us. OpenAAF Image content: HbbTVSkin (DMConcinnity HD Mod Skin) HbbTVLite Skin (DMConcinnity HD Mod Skin) OpenAAF Panel Permanent Timeshift Media Player WebIf Mod Keymap selection (Standard, Custom, neutrino follows) HDMI CEC DVD player Setting the key assignment Own plugin Feed Blue Panel (PPanel) GUI opacity altered BlindScan Swap Manager PiconsAstra 19.2 and the German-language channels on Hotbird 13.0 (only ET9X00 and ET6X00) Fancontrol Current Settings Astra 19.2 and Hotbird 13.0, 23 and 28 degrees "Cool EPG" series WLAN driver and much more ... AAF Specials: Skin and normal skin in the Lite Menu selectable (including 2nd infobar) ET Web browser on the feed (Only for ET9X00 and ET6X00!) Online update package with display Media Player WebIf Softcampanel in WebIf Own feed (online updates are possible) Standard color keys: Blue Key short: Blue Panel (PPanel) Blue Key length: Red Key short HbbTV provided on the transmitter, otherwise the panel OpenAAF Red Key long: When enabled, the panel Softcam Yellow Key short audio settings Yellow Key length: Green Key short option channels where available, otherwise extensions Green Key length: Aspect Ratio (Aspect Ratio) Hardware: Image are available for the following box: Xtrend / ClarkTech Image: et6x00 Box Model: ET6x00 Software: Based on the basis of OpenPLi / openVix / opendreambox Fork as a separate thus will be able to perform their own customizations and implement our knowledge in the SH4 Mipsel environment. Familiar with GUI enhancements and adjustments. Deployment: FEED own with the appropriate plugins will be ready at the beginning of the image. The team: development AAF DEV team: Special thanks goes to Captain, Black 64 and babsy98 Beta Testing AAF beta team: Special thanks goes to janojano, hu*** and dridrudradro Graphics and Design xup quality control NEIP Skins Speedy1 and Krauss Thank you to everyone who helped and a special thanks to Clarkeboss. Your AAF team ! Attention always use latest bootloader! [hideguest]openaaf-1.0-et9x00-20111217_usb.zip (55.75 MB)[/hideguest]
kladovchk: Open AAF Prerelease 20.12.2011 ET 9X00 [hideguest]openaaf-1.0-et9x00-20111220_usb.zip[/hideguest]
kladovchk: HDF-Teamimage v4.5 23.12.2011 ET9x00 HDF-Teamimage v4.5 based on OpenPLi2.1 vom 23.12.2011 So hier dann mal das aktuelle Image v4.5 von uns. Es handelt es um das HDF-Teamimage 4.4 komplett aktualisiert. Update Stand ist der 23.12.2011 um 11:10:53 Uhr. Linux mips 3.1.0 #1 SMP Sun Dec 18 02:02:08 CET 2011. Enthalten sind die aktuellsten Versionen der installierten Plugin und das HbbTV und Weblinks Plugin. Außerdem ist das neue OpenWebif dabei. Zu erreichen über http://ip-adresse_der_box:8088 Skin ist der army.pli in einer gemoddeten Version mit HbbTV Anzeige und ein paar anderen kleinen Sachen. Die aktuellen Picons von Licher können über die HDF-Toolbox nachinstalliert werden. Bedienung des Images wie hier beschrieben: HDF-Teamimage v4.2 16.10.2011. Weitere Informationen bitte in der ET9x00 FAQ und Linksammlung nachlesen. - Treiber vom 12.12.2011 (DTS Downmix, AC3 passthrough etc.) - Speedfix in den Menüs - HbbTV Plugin in der neuen Version 1.1 - Neues Plugin Weblinks mit einigen angepassten Links. - WebradioFS aktuelle Version - Webmedia 4.2 - Oscam Experimental 1.20 build#6121 - Timeshift Pfad auf default eingestellt. - aktuelle Updates vom PLi und Plugins. - UPnP Server MediaTomb integriert (Beschreibung dazu: ET9x00 UPnP Server Mediatomb). - UPnP AV Client djmount integriert (UPnP Server sind dann mit dem MediaPlayer unter /media/upnp zu finden). - aktuelle oscam, cccam und scam versionen integriert. - Skin army.mod kleine Änderungen. - aktuellste Version vom OpenWebif. [hideguest]et9x00_hdfreaks.v4.5_PLi2.1_23122011.zip[/hideguest]
kladovchk: Webbrowser1.1 and new plugin weblinks The new webbrowser with improved red button HBBTV funktion. Add hbbtv-override (etc/enigm@2/ ) There is not a real standard in HBBTV. There are some difference like user-agent and which keymap they use. This can cause that on some sites you must select the select option to scroll through the site and others HHBTV modes. Now with hbbtv-override you can set preset the options of how the HBBTV site must been opened. !!!! WEBLINKS !!!! A new visual plugin, easy to use plugin for everyone. Watch mediathek, youtube, see weather forecast, trafficjams, listen radiomusic, and even order diner and much much more All this through a very easy plugin which can been used by everyone. (Allready available in pli image)
kladovchk: Open AAF ET9X00 Release Image 23.12.2011 Imageinformationen Fakten zum Image: Da wir ja das RAD nicht neu erfinden und es schon großartige Images gibt für die Receiver, haben wir die Grundlagen schon von einigen Klasse Open Teams Übernommen. Wir möchten uns hier schon mal bedanken für eure erstklassige Arbeit was ihr in der Vergangenheit gemacht habt und was ihr noch in Zukunft alles macht. Ohne eure Vorarbeit und Einsatz würde es kein OpenAAF Image geben. Danke geht an: openpli Team: Für das Grund Konzept und die super Integration der Hardware Modelle openVix Team: Für das GUI Modding und Feature Konzept und den vielen kleinen interessanten Ideen openEmbedded: Ohne deren Build Umgebung, wäre nichts möglich gewesen Opendreambox: Für das GUI eopenplugins: Diese Idee haben wir mit Freude aufgenommen, wenn wir einmal so weit sind kommt auch was von uns. OpenAAF Image Inhalt: HbbTVSkin (DMConcinnity-HD Mod-Skin) HbbTVLite Skin (DMConcinnity-HD Mod-Skin) OpenAAF Panel Permanent Timeshift Media Player WebIf Mod Keymap Auswahl (Standard, Eigene, Neutrino folgt) HDMI CEC DVD-Player Eigener Plugin Feed Blue Panel GUI Deckkraft veränderbar BlindScan Swap Manager PiconsAstra 19,2 und die deutschsprachigen Sender auf Hotbird 13,0 (nur ET9X00 und ET6X00) Fancontrol (ist Boxabhängig) Aktuelle Settings Astra 19,2 und Hotbird 13,0 , 23 und 28 Grad „Cool EPG“ Serie WLAN-Treiber (nur über den Feed) Autotimer und vieles mehr… AAF Specials: Skin normal und Skin Lite im Menu selektierbar (inkl. 2nd Infobar) ET Webbrowser auf dem Feed (Nur für ET9X00 und ET6X00!) Online Update mit Paketanzeige Media Player im WebIf Softcampanel im WebIf Eigener Feed (Online Updates) Änderung der Display Einstellungen (Displaysymbole) Softwaremanager komplett integriert (Full Backup, Einstellungen sicher, etc.) Einstellung der Tastenbelegung und vieles mehr.. Standard Farbtasten: Blue Key kurz: Blue Panel Blue Key lang: Red Key kurz: HbbTV sofern auf dem Sender, sonst das OpenAAF Panel Red Key long: Sofern aktiviert das Softcam Panel Yellow Key kurz: Timeshift(default)/Audio Einstellungen Yellow Key lang: Green Key kurz: Optionskanäle sofern vorhanden, sonst Erweiterungen Green Key lang : Seitenverhältnis (Aspect Ratio) Hardware: Image sind für folgende Box verfügbar: Xtrend/Clarktech Image: et9x00 Box Modelle CT9000, CT9100, ET9000, ET9200 Image: et5x00 Box Modell: ET5000 Image: et6x00 Box Modell: ET6000 VuPlus Image: vusolo Image: vuuno Image: vuduo Image: vuultimo (coming soon) DreamMedia Image: dm8000 Image: dm7020hd (ungetestet) Image: dm800se Image: dm800hd Image: dm500hd (ungetestet) Software: Basiert auf Grundlage von openPli/openVix/opendreambox als eigener Fork dadurch sind wird in der Lage eigene Anpassungen durchzuführen und unseren SH4 Kenntnisse auch im Mipsel Umfeld umzusetzen. Bekannte GUI mit Erweiterungen und Anpassungen. Bereitstellung: Eigener FEED mit entsprechenden Plugins wird gleich zu Beginn für die Images bereit stehen. Zum Team: Entwicklung: AAF DEV Team: Besonderen Dank geht an Captain, Black 64 und babsy98 Beta Testing: AAF Beta Team: Besonderen Dank geht an janojano, husky und dridrudradro Grafik und Design: xup Qualitätskontrolle: neipe Skins: Speedy1 und Krauss Danke an alle die mitgeholfen haben! [hideguest]openaaf-1.0-et9x00-20111223_usb.zip[/hideguest]
kladovchk: openAAF Release Image Information Stand 09.01.2012 Update Information zum 09.01.2012 Release Image Allgemein - Update coolTV Guite 5.1 - fix lcd handling - fix deepstandby hdmi cec - alle openpli updates bis 5.1.2012 - fix gs openaaf panel - fix Merlin EPG Center - add cccam info to feed - update valerie plugin and fix gs nach der installation - fix blue buton softcam panel - add cam download feature to softcam panel - add Beta Media Center - add online Update Traffic Light Feature Meldungen bei Problem mit den Online Update können wir nun das Update verhindern. da die Box zu erst einmal Überprüft ob das Online Update OK ist. Wenn wir ein neues Online Update Bereit stellen und es noch keine Meldungen gibt stellen wir die Ampel auf Gelb, dadurch bekommt Ihr einen Hinweis das es noch keine Rückmeldungen gab und das Update auf eigenes Risiko Installiert. Wenn wir Positive Rückmeldungen bekommen stellen wir die Ampel auf Grün und es gibt keine Meldung beim Online Update. Das ganze haben wir eingebaut aus der Erkenntnis mit den Online Update vom 24.12 wo ein File vergessen wurde wir hoffen das wir dadurch den User Kreis wo es Probleme gibt extrem Minimieren können und das Ihr nicht durch einen blöden Fehler eurer Installationen beschädigt. Fehler sind aber niemals Ausgeschlossen, hoffen auf eurer Verständnis. Update 9.1.2012 etxxx Images - add showoutputresolution to Box VFD Menu - add VFD Power OFF to Box VFD Menu - add new Drivers 07.01.2012 - add preemphasis to hdmi-cec Menu - Update et-Webbrowser 1.2 on feed - add et-weblinks-basic to feed - add et-portal to feed vu Images - Update LCD Support Ultimo all Images - fix use of old format automount.xml - Update Translations - fix Timeshift - fix LCD support - add all new openpli fixes and features 8.1 - add all new openvix fixes and features 8.1 - fix openAAF Panel - Update channellist - update satellites.xml Plugins Updates - Update BMediaCenter - MerlinEPG Center - Autoresolution - WebInterface - Networkbrowser - KiddyTimer - DVDBackup - EPGRefresh - epgsearch - partnerbox - werbezapper openaaf-1.0-et9x00-20120109_usb.zip
kladovchk: Open AAF ET9X00 Release Image 13.01.2012 Update Information zum 13.01.2012 Release Image Allgemein - Update coolTV Guite 5.1 - fix lcd handling - fix deepstandby hdmi cec - alle openpli updates bis 5.1.2012 - fix gs openaaf panel - fix Merlin EPG Center - add cccam info to feed - update valerie plugin and fix gs nach der installation - fix blue buton softcam panel - add cam download feature to softcam panel - add Beta Media Center - add online Update Traffic Light Feature Meldungen bei Problem mit den Online Update können wir nun das Update verhindern. da die Box zu erst einmal Überprüft ob das Online Update OK ist. Wenn wir ein neues Online Update Bereit stellen und es noch keine Meldungen gibt stellen wir die Ampel auf Gelb, dadurch bekommt Ihr einen Hinweis das es noch keine Rückmeldungen gab und das Update auf eigenes Risiko Installiert. Wenn wir Positive Rückmeldungen bekommen stellen wir die Ampel auf Grün und es gibt keine Meldung beim Online Update. Das ganze haben wir eingebaut aus der Erkenntnis mit den Online Update vom 24.12 wo ein File vergessen wurde wir hoffen das wir dadurch den User Kreis wo es Probleme gibt extrem Minimieren können und das Ihr nicht durch einen blöden Fehler eurer Installationen beschädigt. Fehler sind aber niemals Ausgeschlossen, hoffen auf eurer Verständnis. Update 9.1.2012 etxxx Images - add showoutputresolution to Box VFD Menu - add VFD Power OFF to Box VFD Menu - add new Drivers 07.01.2012 - add preemphasis to hdmi-cec Menu - Update et-Webbrowser 1.2 on feed - add et-weblinks-basic to feed - add et-portal to feed vu Images - Update LCD Support Ultimo all Images - fix use of old format automount.xml - Update Translations - fix Timeshift - fix LCD support - add all new openpli fixes and features 8.1 - add all new openvix fixes and features 8.1 - fix openAAF Panel - Update channellist - update satellites.xml Plugins Updates - Update BMediaCenter - MerlinEPG Center - Autoresolution - WebInterface - Networkbrowser - KiddyTimer - DVDBackup - EPGRefresh - epgsearch - partnerbox - werbezapper Update 13.01.2012 - Aktuelle Updates bis 13.1.2012 - Update BMedia Center - add eventview to EPG button selectionlist - add Plugin SubsDownloader2 - add Autotimer Webif - Update Autotimer - Update EPGRefresh - Fix Webif - fix vlcplayer - Update imdb - Update merlinepgcenter - update mtd Util 1.4.9 - fix VU Image Backup [hideguest]openaaf-1.0-et9x00-20120113_usb.zip[/hideguest]
kladovchk: HDF-Teamimage v4.6 14.01.2012 ET9x00 HDF-Teamimage v4.6 based on OpenPLi2.1 vom 14.01.2012 Clark-tech/Xtrend ET9x00 HDF Teamimage v4.6 basierend wie immer auf dem bewährten PLi 2.1. Den Ordner et9x00 auf einen USB-Stick entpacken, anstecken und den Receiver neustarten. Wer Probleme beim Flashen hat sollte versuchen den Ordner auf dem USB Stick in "ET9X00" (großes X) umzubennen. Das Plugin "Autoinstall" sollte im alten Image deaktiviert sein und es sollten keine alten Backups auf Platte oder Stick vorhanden sein. Sonst wird automatisch wiederhergestellt. Für das Image wird der aktuelle Bootloader benötigt. Der original Bootloader ist von hier: http://www.clarke-xtrend-support.com/For…3625-Bootloader Im Prinzip ist es ein HDF 4.5 auf die neue Struktur aktualisiert mit aktuellen Updates und Treibern. Wenn beim Setup kein Sendersuchlauf gemacht wird ist eine vorbereitete Senderliste enthalten. Hinweise zur Bedienung: Rot - HbbTV Rot Lang - Timer Editor Grün - Submenü Unterkanäle Grün Lang - frei (Änderung über MultiQuickButton) Gelb - frei (Änderung über MultiQuickButton) Gelb Lang - frei (Änderung über MultiQuickButton) Blau - Erweiterungen Blau Lang - Plugins Info - aktuelles Sender EPG Info Lang - Cool Single Guide Guide - Cool Multi Guide Guide lang - frei (Änderung über MultiQuickButton) Exit - frei (Änderung über MultiQuickButton) Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen < > - Zap-History Filelist - Enhanced Movie Center Playlist - Media Player Timeshift - startet sofort Timeshift Vkey - Enhanced Movie Center oder frei belegbar Vkey lang - frei (Änderung über MultiQuickButton) Mark - Weblinks Plugin Search - EPG aktueller Sender mit OK Auswahl auf die Sendung AutoTimer Pip - Auswahl Pip und Pip Zap Modus Changelog: - Änderungen OpenPLi 2.1 Твиттер - Enigma2: http://openpli.git.sourceforge.net/git/g…gma2;a=shortlog - openembedded: http://openpli.git.sourceforge.net/git/g…dded;a=shortlog - Plugins: http://openpli.git.sourceforge.net/git/g…gins;a=shortlog Änderungen im Image 4.6: - alle PLi Updates bis 14.01.2012 - aktuelle Kernel 3.1.0 #1 SMP Fri Jan 13 18:51:46 CET 2012 mips GNU/Linux - Media Player wieder enthalten - DVD Player wieder enthalten - aktuelle Version des AutoTimers enthalten - Seekbar Plugin angepasst (vorspulen mit links/rechts in Videos und Aufnahmen) - aktuelles army.mod Skin - Oscam ymod 18 t23 - funktionierender Dreamexplorer und Filebrowser - überarbeiteter Softcam Cardserver Manager - Simple Unmount (auf Wunsch) - aktuelle Version Webbrowser und Weblinks. - ET Portal (auf der Mark Taste) - eCasa (Google Picasa Bild Betrachter) - LCD4Linux (vorkonfiguriert nur das Pearl Display anklemmen wenn es gehackt ist) - OSD 3D Setup (automatisches Umschalten auf 3D wenn ein 3D Sender gewählt wird) - Open Webif auf Port 80 (das alte Webif ist auf Port 8088 ) - ansonsten die bewährten Sachen aus den Images davor. Wichtig!!! Aktueller Bootloader muss installiert sein. Der Bootloader ist von hier: http://www.clarke-xtrend-support.com/For…3625-Bootloader Bootloader im Anhang herunterladen und per USB-Stick wie ein Image installieren. Der Bootloader im Anhang ist der aktuelle Loader mit et9x00 Unterstützung. et9x00_hdfreaks.v4.6_PLi2.1_01142012.zip
kladovchk: Xtrend ET Control Centre by Goldwafers Version 1.2 (14-01-2012) Updated Media Files Manager. Now you can upload or download multiple media files to and from the receiver. Updated Settings Backup. To keep informed on new developments follow us on Twitter[hideguest] and Youtube. ETCC.zip[/hideguest]
kladovchk: Open AAF ET9X00 Release Image 04.02.2012 Update Image 04.02.2012 - Update CoolTVGuite auf V5.5 thx Coolman - alle neue Pli Updates der letzten 7 tage eingebaut thx Pli Team - alle neuen vix Updates der letzten 7 Tage eingebaut thx vix Team - viele neue Skins auf den feed - viele neue Plugins auf den feed - Update Media Center - fix menu sroll slow down - fix Partnetbox new epg - fix epg search GS - fix merlin epg list - fix hdd standby hdd timer - vu update drivers - dm update drivers uvm.... openaaf-1.0-et9x00-20120204_usb.zip
kladovchk: Open AAF ET9X00 Release Image 20.02.2012 Update Image 20.2 bitte NEU FLASCHEN !!!! wegen entfernen von EMC, oder nach den Online Update EMC löschen. - Update Airplayer 0.1.9 - Fix Shoutcast Plugin - Fix Swapmanger GS - Fix SundtekContolCenter - deutsch als default sprache auch im StartWizard - Update deutsche Übersetzungen - EMC 3 entfernt - Erweitere FilmAuswahl hinzugefügt - Menu Umgebaut , Extra Anpassungen Einstellungen Teile Verlagern ins TV/Menu Einstellungen Zur besseren Übersicht. - openPli Update bis 19.2, danke geht ans open Pli Team - openVix Update bis 192., danke geht ans open Vix Team - Update BMC MediaCenter zum Mittag in der Database [hideguest]openaaf-1.0-et9x00-20120220_usb.zip[/hideguest]
kladovchk: Open AAF ET9X00 Release Image 22.02.2012 Quick Fix 22.02.2012 Quick Fix 22.02 via Online Update et ab 10:00 Uhr, Vu ab 11:00 Uhr, DM ab 12:00 Uhr GB ab 13:00 Uhr - Update Airplayer auf Feed 0.1.10, wenn nach den Online Update Probleme gibt sonst bitte einmal : opkg install python-misc - Fix GS MerlinEPGCenter - Fix GS advancedmovieselection openPli Update bis 21.2 Abends sind auch enthalten Info Crashlog liegt immer unter /home/root/logs !!! sonst kann man den Ort in den Einstellungen auch umstellen auf USB Gerät oder HDD je was gerade Angeschlossen war. [hideguest]openaaf-1.0-et9x00-20120222_usb.zip openaaf-1.0-et9x00-20120223_usb.zip [/hideguest]
kladovchk: ======================================================================== Persian Prince Proudly Presents : Persian Palace Package (February 2012) ======================================================================== Mipsel : DreamBox 800,800SE,8000,7020HD,500HD,7025 VuPlus Solo,Duo,Uno,Ultimo Xtrend ET5X000,ET6X000,ET9X000 (Tested With Black Hole DVBApp Image) Sigma : AZBox Me,Mini Me,Elite,Ultra,Premium (Tested With RTi Core DVBApp Image) PowerPC : DreamBox 7020,600,500+ (Tested With PCD DVBApp Image) SH4 : CubeRevo-IPBox HD Models (Tested With SifTeam DVBApp Image) ======================================================================== Clean Version Does Not Contain Any Keys Or SoftCams Full Version Supports SoftCams And Emulators ======================================================================== [hideguest]Persian-Palace-Package-February-2012.zip[/hideguest]
kladovchk: Open AAF ET9X00 Release Image 28.02.2012 Quick Fix Update Image 28.02.2012 heute so gegen 21:00 - 23:00 Uhr Online - Update CoolTVGuide 5.6.1 thx Coolmann - fix PTS - Update Pli Updates 27.2 - fix Show DVD Player im MainMenu [hideguest]openaaf-1.0-et9x00-20120228_usb.zip[/hideguest]
kladovchk:
kladovchk: SifTeam Enigma2 Koala Cteck et9000 05/03/2012 1)Moved to enigma2 openpli project (thank you openpli team) 2)Sifteam cloud system (You can connect your sifteam forum account on your stb, in the future release you can backup your image,share channels settings etc etc in your personal account storage) 3)New Graphic skin. Thank you so much to daconi. 4)Redisegned SifTeam Panel Menu 5)Redesigned Software Manager.Added possibility to rank your favourite plugin, you can consult top rated,most downloaded plugin etc etc 6)Added Bouquets and Channels Menu. Now you can download your favourite channel list settings. 7)Exclusive possibility to use Original Sky Ita channel list numeration starting from number 100 like skybox stb 8)Added OpenWebIf 9)New System to detect and install Usb devices 10)Many fixes to Mount Disk manager 11)Added Temporary-Static Mount. 12)Added uuid use on fstab 13)Support autoresize for picons (100x60 e 130x80) 14)Airplay Server coming soon [hideguest]sifteam-enigm-koala-et9x00-20120304230726_usb.zip sifteam-enigma2-koala-vuduo-20120305011416_usb.zip sifteam-enigma2-koala-vuuno-20120305014221_usb.zip sifteam-enigma2-koala-vuultimo-20120305015633_usb.zip sifteam-enigma2-koala-vusolo-20120305012809_usb.zip [/hideguest] Extra.url For SIF-Team E2 Copy the Unzipped url to /etc/opkg Restart E2 than go to Software Manger Press Green than go to url2 (WORKS ALSO WITH KOALA IMAGE)
kladovchk: Open AAF ET9X00 Release Image 08.06.2012 Quick Fix Update Image 8.3.2012 Nur kleines Update - Update alle openpli 08.3.2012 - update Valerie auf Build 1211 - Infobar Probleme gefixt wie z.b. Cutlisteditor GS etc. - Update Media Center - Update DHCP add Hostname
kladovchk: Xtrend-Support Image V5 Linux 3.2.2 aktuellste Treiber: ET 5X00 ET 6X00 ET 9X00 -Xtrend Erweiterungen für ein komplett modulares Image - Xtrend HD Lava Skin (Redesigned) - Back to Black skin (auswählbar im skin menu) - Xtrend Panel - optional Secondinfobar (zeigt mehr Infos mit 2x OK) - Sysinfopanel (komplette Übersicht aller Systemparameters) - HDMI-CEC Support via Plugin - WLAN fixes und Support für 80211b/g/n Ralink, Realtek, Carl based USB-Dongles (rt2800USB, rtl871x, AR9170) - Running "broken" Shellscript (as Cronjobs) funktioniert - Acousticpatch (HDD mit support für acoustic parameter wird benötigt) Höhepunkte: -Softwareaktualisierung: Das Xtrend v5 Image wurde glechzeitig mit dem Software-Update gebaut,um Benutzeranfragen schneller umsetzten zu können. Um nicht jedes mal neu Flashen zu müssen bei jedem neuen Update,können Sie jetzt über den Punkt: Menü/Einstellungen/Softwareverwaltung/Softwareaktualisieren ganz bequem erledigen. Die Updates werden im Forum auf et-view-support.com bekanntgegeben und direkt im Image bei XT-News im XT-Panel. -Xtrend-Webbrowser HbbTV: Dieses Image unterstützt den einzigartigen HbbTV/Webbrowser.Für mehr Infos lesen Sie bitte die Readme-Datei im Image oder besuchen Sie unser Forum. -Daemon-Manager: Zur Information: -Ein Daemon ist ein Computerprogramm, das im Hintergrund läuft. Der Daemon erfordert eine Start / Stopp-Skript - das Skript muss ausführbar sein (chmod 755), platziert in / etc / init.d und der Name muss mit "DMON" beginnen. -Wechsel-Modus: Beim Wechsel-Modus können Sie wählen wie das Hauptmenü angezeigt werden soll, wählbar "Texte, Symbole oder blättern". Bitte ändern Sie diese Einstellungen unter / System / Anpassen / mainmenu list-Option. - XT-Nachrichten Feed Neu: Linux version 3.2.2 Drivers vom 04.02.2012 optional Secondinfobar Xtrend FEED Inhalt : - Driver - Games - picons - Plugins - Setting - Skins - systemPlugins Erhaltene Plugins: XT-Panel AudioSync Change spinner EPGImport Cool TV Guide v5.6.1 GlassSysUtil GraphMultiEPG MediaPlayer MediaScanner PicturePlayer Tuxtxt WebMedia Backup-Suite WebLinks Open Webif Einstellungen: 1. Man kann die Optik des menü´s verändern menu - setup - system - customize wechsle zu: "mainmenu list option". folgende 3 Einstellungen sind möglich: "icon scroll" "icon thumbs" oder "text" Die Text-Option looks like CT 1.1-Image. Es gibt kein pig (picture in graphic) mit dem Modus "text". 2. Mit der Secondinfobar sieht man mehr EPG Infos (now / next). menu - setup - system - customize Auswahl: "Show second infobar" folgende Möglichkeiten: "None" "No timeout" (Anzeige bleibt bis zu einem erneuten Druck auf dei "OK" Taste stehen.) "1 - 10 seconds". Man kann die Größe der Secondinfobar im Menu: "Second infobar size" zwischen maximum und minimum umstellen. (GUI neu starten um die Änderungen zu sehen) Ein spezial Dankeschön geht an: pcd (Main Developer) babsy98 (git-Support) Xtrendmaster(Skins,Bootlogos,Project Management) All Betatesters ( CoolST, icewaere, dispatcher, teckl, Biki3,memo,Postla,kalehrl,mogli123,matrix64 ) Pedro_newbie (image backup plugin) Pli team (for the image background code) All the other code developers and plugin developers a big thanks to XtrendBoss Herunterladen der täglich aktualisierten Version Edit by teckl An alle: Es gab einige Anfragen wegen Softcams instalieren. Hier mal zwei Varianten,wie es geht: Variante 1,XT-Feed: Menü/XT-Panel/Erweiterungs-Manager/Xtrend-Erweiterungen herunterladen/Softcams/entsprechendes Softcam herunterladen Zurück wieder zum XT-Panel/Daemon Manager/Mit grüner Taste,Starten/Neustarten das Softcam.Es steht dann "Running" beim entsprechenden Softcam. Variante 2,Glass System Utillty: Menü/Erweiterungen/Glass System Utillty/Universal Cams Manager/Taste "0" auf der FB betätigen entsprechendes Softcam herunterladen.Beim Punkt Cam`s mit rechts Taste das heruntergeladene Softcam auswählen und mit grüner Taste starten. [hideguest]xtrend-5.0-et9x00-20120314_usb.zip XTREND SUPPORT Image v5[/hideguest]
kladovchk: Open AAF ET9X00 Release Image 17.03.2012 Image 17.3.2012 (Online) Neues Flash Image 17.03.2012 Online Update nicht Möglich !!!! Online ! Es muss neu geflascht werden - diverse GS in AMS gefixt - DVD ISO Support in AMS Aktiviert - Weitere Image Reduzierung Image Größe noch mal um 10 MB Verkleinert damit gibt es nun keine Probleme mehr mit 64 MB Boxen. - Update tuxtxt.ttf für bessere Schrift in VideoText - fix GS in TV Menu Einstellungen - HTTP Timeout für webstreming verbessert - Update gstreamer neue Version von allen Media Codecs - Fix GS bei defekten Media Files oder Unbekanten Codecs - Update german translations - Remove aller default deaktivierten Netzwerk Service, Installation jetzt nur bei bedarf (Image Reduzierung) - alle openpli Uodate bis 16.3 - alle openvix Update bis 16.3 - fix mediaset epg support - fix blindscan plugin ET Models - update Valerie build - [BMC] update skinfile and add infobar for videoplayer..not finish yet [hideguest]openaaf-1.0-et9x00-20120317_usb.zip[/hideguest]
kladovchk: New Drivers - linux-3.2.2 - 24.03.2012 Changelog: ----------------------------------------------------------------------- -DVB-T 5V -make sci devices single-open -improved tuner scan -WMV support -WMA support -WAV support (pcm wrapped in PES, to keep sync with video) -alsa mixer switch to enable/disable decoder audio -internally control vfd symbols -allow individual vfd symbol override from userspace -frontend status: report correct FEC -startup in 720p mode [hideguest]et-dvb-modules_3.2.2_20120323-r7.0_et9x00.ipk gst-plugin-etmediasink_0.10.0-r0_et9x00.ipk[/hideguest]
kladovchk: Open AAF ET9X00 Release Image 25.03.2012 Update Image 25.3.2012 Xtrend - Update neue Treiber 24.3 - ET-Webrowser 1.5 auf feed - Weblinks 1.3 auf feed - Weblinks Games 1.0 auf feed - ICE Kernel Tuning 1.2 auf feed Dreambox - Update Treiber 22.3 DM800/DM800se/DM7020HD/DM8000 ALLE - Update Media Center - Fix Message Box keine Schrift - alle neuen pli Updates bis 25.3 - alle neuen vix Updates bis 25.3 - Update Webinterface - add Autotimer webinterface [hideguest]openaaf-1.0-et9x00-20120325_usb openaaf-1.0-vuultimo-20120325_usb openaaf-1.0-vuduo-20120325_usb openaaf-1.0-vuuno-20120325_usb openaaf-1.0-vusolo-20120325_usb.zip[/hideguest]
kladovchk: ET9x00/ET6x00 HDF-Teamimage v4.8 based on OpenPLi2.1 vom 04.04.2012 Clark-tech/Xtrend ET9x00 und ET6x00 HDF Teamimage v4.8 basierend wie immer auf dem bewährten PLi 2.1. Den Ordner et9x00/et6x00 auf einen USB-Stick entpacken, anstecken und den Receiver neustarten. Beim ET6000 warten bis die grüne und orange LED leuchten. Dann Taste nach oben an der Front drücken und warten bis der Flash erfolgt ist. Das ET6000 Image ist ein ET9x00 Image mit angepassten Treibern und Hostname. Ansonsten sind die beiden Images gleich. Wer Probleme beim Flashen hat sollte versuchen den Ordner auf dem USB Stick in "ET9X00" (großes X) umzubennen. Das Plugin "Autoinstall" sollte im alten Image deaktiviert sein und es sollten keine alten Backups auf Platte oder Stick vorhanden sein. Sonst wird automatisch wiederhergestellt. Für das Image wird der aktuelle Bootloader benötigt. Der original Bootloader ist von hier: http://www.clarke-xtrend-support.com/For…3625-Bootloader Das 4.8 wurde komplett runderneuert, aufgeräumt und ein bissel entkernt. Wenn beim Setup kein Sendersuchlauf gemacht wird ist eine vorbereitete Senderliste enthalten. Ich habe versucht alle Wünsche aus dem 4.7 Thread umzusetzen. Es sind keine EMU, Softcams und Configs enthalten. Die können aber bequem über den HDF-Downloader installiert werden. Hinweise zur Bedienung: Rot - HbbTV Rot Lang - Bitrate Viewer Grün - Submenü Unterkanäle Grün Lang - Wechsel 16:9, 4:3 Pillarbox,PanScan Gelb - Audio Einstellungen Gelb Lang - frei (Änderung über MultiQuickButton) Blau - Erweiterungsmenu Blau Lang - Erweiterungen Info - Senderinfo Info Lang - Einfacher EPG des Senders Guide - Cool Multi Guide Guide lang - Zap-History Ok Lang - Virtual Zap Exit - frei (Änderung über MultiQuickButton) Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen 0 - Senderwechsel zwischen aktuellem und letzter Sender < > - Sender History vor und zurück Filelist - Enhanced Movie Center Playlist - Media Player Playlist Lang - frei (Änderung über MultiQuickButton) Timeshift - startet sofort Timeshift Vkey - Aufnahmen mit Enhanced Movie Center Vkey lang - EPG Plugins Search - EPG Suche Search Lang - Softcam Cardserver Manager Menü Lang - EPG Erweiterungen Mark - Weblinks Plugin Pip - Auswahl Pip und Pip Zap Modus TV Lang - TVCharts Radio Lang - SHOUTcast oder WebradioFS Changelog: - Änderungen OpenPLi 2.1 http://twitter.com/#!/openpli - Enigma2: http://openpli.git.sourceforge.net/git/g…gma2;a=shortlog - openembedded: http://openpli.git.sourceforge.net/git/g…dded;a=shortlog - Plugins: http://openpli.git.sourceforge.net/git/g…gins;a=shortlog Änderungen im Image 4.8: - alle PLi Updates bis 06.04.2012. - aktuelle Kernel Linux et9x00 3.2.2 #1 SMP Tue Mar 20 23:00:16 CET 2012 mips GNU/Linux (ohne Pinguine zur Zeit) - Aktuelle Version HDF-Toolbox mit HDF-Downloader. - Aufnahmen aus dem Deep Standby per Timer (auto) sollten jetzt funktionieren. - Uhrzeit vom Transponder wenn die Box offline ist (wenn die HDF-Toolbox installiert ist und bleibt). - Treiber vom 04.02.2012 (wegen DTS Downmix, die neuen Treiber können bei Bedarf über den HDF Downloader installiert werden). - Media Player enthalten mit EMC 3.0.0 Frontend und PLi Fix. - DVD Player enthalten. - aktuelle Version des AutoTimers enthalten. - Seekbar Plugin angepasst (vorspulen mit links/rechts in Videos und Aufnahmen). - aktuelles army.mod Skin. - überarbeiteter Softcam Cardserver Manager. - Simple Unmount (auf Wunsch). - aktuelle Version Webbrowser und Weblinks. - ET Portal (auf der Mark Taste). - OSD 3D Setup (automatisches Umschalten auf 3D wenn ein 3D Sender gewählt wird). - Open Webif auf Port 80 (das alte Webif kann bei Bedarf gestartet werden). - Bundesliga und Ligaticker (Sport Portal über den HDF Downloader). - IMDb und OFDb - Partnerbox Mod - YYtrailer (in der Single EPG Liste lange I Taste auf die TV Taste drücken für Treiler von Youtube). - NFS Server, uShare und djmount als DLNA/upnp Client. - Full-Backup 9.1 von Pedro_Newbie. - ansonsten die bewährten Sachen aus den Images davor. Anmerkung! Der Clean Kernel ist der jetzt aktuelle vom 20.03.2012 ohne Pinguine. Im HDF 4.8 wird der automatisch mit geflasht. Der ist also nur für Leute interessant die beim 4.7 bleiben und regelmäßig das PLi und Spinnerupdate machen. Wichtig!!! Aktueller Bootloader muss installiert sein. Der Bootloader ist von hier: http://www.clarke-xtrend-support.com/For…3625-Bootloader Bootloader im Anhang herunterladen und per USB-Stick wie ein Image installieren. Der Bootloader im Anhang ist der aktuelle Loader mit et9x00/et6x00 Unterstützung. [hideguest]et9x00_hdfreaks.v4.8_PLi2.1_06042012.zip et9000-bootloader.zip et6x00_hdfreaks.v4.8_PLi2.1_06042012.zip et6000-bootloader.zip et9x00_et6x00_clean_kernel_Image_20.03.2012.zip [/hideguest]
kladovchk: New Drivers - Linux Kernel 3.3 - 08.04.2012 Neue Treiber für ein Image mit Linux Kernel 3.3 New Drivers for Images based on Linux Kernel 3.3 Changelog: ----------------------------------------------------------------------- -working for Kernel 3.3 -DVB-T 5V -make sci devices single-open -improved tuner scan -WMV support -WMA support -WAV support (pcm wrapped in PES, to keep sync with video) -alsa mixer switch to enable/disable decoder audio -internally control vfd symbols -allow individual vfd symbol override from userspace -frontend status: report correct FEC -startup in 720p mode [hideguest]et-dvb-modules_3.3.0-20120331-r8.0_et9x00.ipk[/hideguest]
kladovchk: Update Image 11.4.2012 Image Update 11.04.2012 - Update advancedmovieselection (AMS) auf Version 2.6, thx Jack Daniel - Update CoolTvGuite auf Version 5.6.2 thx Coolman - openpli Updates der letzten 14 Tage, big thx to openpli team for the great work - openvix Updates der letzten 14 Tage, bix thx to Andy Black - Add Software Update Button AAF Panel - Fix Image Backup to work with MTD Utils 1.4.9 Update Xtrend Only - Update to Kernel 3.3 [hideguest]openaaf-1.0-vuuno-20120411_usb.zip[/hideguest]
kladovchk: Open AAF ET9X00 Release Image 15.04.2012 Update Image 15.4.2012 - AMS entfernt aus dem Image, wenn ein Online Update gemacht wird bitte noch folgenden Ordner löschen /usr/lib/enigma2/python/Plugins/Extensions/AdvancedMovieSelection wenn es nicht gelöscht wird gibt es Probleme mit den EMC 3.x Beta - EMC 3.x Beta im Image mit Cover Search thx Coolman für das Klasse Plugin - Add ein Mix aus alten und neuen DVD Player DVD ISO Funktion bitte nur über EMC Verwenden nur so getestet alles weitere muss noch Überprüft werden. - Add CooltvGuite Skin nun passend zum Image - Pli Updates von 14.4 [hideguest]openaaf-1.0-et9x00-20120415_usb.zip[/hideguest]
kladovchk: Open AAF ET9X00 Release Image 17.04.2012 Image Update 17.4.2012 - Fix EMC GS 2 mal Setup Aufruf - Fix EMC GS Exit - Fix Abhängigkeiten der Plugins, keine Deinstallation war dadurch möglich - Fix EMC MediaCenter Infobar untere Ansicht hatte komplett gefehlt - Fix EMC MediaCenter Sprungmarken Taste < 0 > hatten keine Funktion - Add Skin AAF Panel Button Konfig - Add Menu Unter Erweiterunge Plugins, zum Filtern der Ansicht - Fix Softcam Autostart nach Reboot - Update Display Time in Movielist - alle Pli Update bis 17.4 - remove Message OnlineChecker - fix openvpn stop - fix GS Close Menu Recursive - fix FAn Control Xtrend Missing - fix GS DVDPlayer missing global variable - fix GS NetworkSetup AFP Service Remove [hideguest]openaaf-1.0-et9x00-20120418_usb.zip[/hideguest]
kladovchk: ET9x00, ET6x00 HDF Teamimage v4.9.2 ET9x00/ET6x00 HDF-Teamimage v4.9.2 based on OpenPLi2.1 vom 21.04.2012 Clark-tech/Xtrend ET9x00 und ET6x00 HDF Teamimage v4.9.2 basierend wie immer auf dem bewährten PLi 2.1. Den Ordner et9x00/et6x00 auf einen USB-Stick entpacken, anstecken und den Receiver neustarten. Beim ET6000 warten bis die grüne und orange LED leuchten. Dann Taste nach oben an der Front drücken und warten bis der Flash erfolgt ist. Das ET6000 Image ist ein ET9x00 Image mit angepassten Treibern und Hostname. Ansonsten sind die beiden Images gleich. Wer Probleme beim Flashen hat sollte versuchen den Ordner auf dem USB Stick in "ET9X00" (großes X) umzubennen. Das Plugin "Autoinstall" sollte im alten Image deaktiviert sein und es sollten keine alten Backups auf Platte oder Stick vorhanden sein. Sonst wird automatisch wiederhergestellt. Für das Image wird der aktuelle Bootloader benötigt. Der original Bootloader ist von hier: http://www.et-view-support.com/Forum/sho…3625-Bootloader Wenn beim Setup kein Sendersuchlauf gemacht wird ist eine vorbereitete Senderliste enthalten. Es sind keine EMU, Softcams und Configs enthalten. Die können aber bequem über den HDF-Downloader installiert werden. Hinweise zur Bedienung: Rot - HbbTV Rot Lang - Bitrate Viewer Grün - Submenü Unterkanäle Grün Lang - Wechsel 16:9, 4:3 Pillarbox,PanScan Gelb - Audio Einstellungen Gelb Lang - frei (Änderung über MultiQuickButton) Blau - Erweiterungsmenu Blau Lang - Erweiterungen Info - Senderinfo Info Lang - Einfacher EPG des Senders Guide - Cool Multi Guide Guide lang - Zap-History Ok Lang - Virtual Zap Exit - frei (Änderung über MultiQuickButton) Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen 0 - Senderwechsel zwischen aktuellem und letzter Sender < > - Sender History vor und zurück Filelist - Enhanced Movie Center Playlist - Media Player Playlist Lang - frei (Änderung über MultiQuickButton) Timeshift - startet sofort Timeshift Vkey - Aufnahmen mit Enhanced Movie Center Vkey lang - EPG Plugins Search - EPG Suche Search Lang - Softcam Cardserver Manager Menü Lang - EPG Erweiterungen Mark - Weblinks Plugin Pip - Auswahl Pip und Pip Zap Modus TV Lang - TVCharts Radio Lang - SHOUTcast oder WebradioFS Changelog: - Änderungen OpenPLi 2.1 http://twitter.com/#!/openpli - Enigma2: http://openpli.git.sourceforge.net/git/g…gma2;a=shortlog - openembedded: http://openpli.git.sourceforge.net/git/g…dded;a=shortlog - Plugins: http://openpli.git.sourceforge.net/git/g…gins;a=shortlog Änderungen vom Image 4.9 zum Image 4.9.2: - Kernel 3.3.0 mit aktuellen Treibern, PLi Update Stand 21.04.2012 (zur Zeit mit Pinguinen) - aktuelles GST Mediasink (Audio Problem bei AC3 Filmen gefixt) - Skin army.mod überarbeitet (wegen PLi Änderungen) - Skin Nobile überarbeitet mit neuer Second Infobar - Anpassungen in der HDF-Toolbox (wegen PLi Änderungen) - Anpassungen im HDF-Downloader (wegen PLi Änderungen) - Anpassungen im Softcam Cardserver Manager (wegen PLi Änderungen) - ext2 und ext3 Kernel Module im Image enthalten - soweit möglich alle Plugins auf aktuellen Stand gebracht [hideguest]et9x00_hdfreaks.v4.9.2_PLi2.1_21042012.zip et6x00_hdfreaks.v4.9.2_PLi2.1_21042012.zip [/hideguest]
kladovchk: Open AAF ET9X00 Release Image 25.04.2012 [hideguest]openaaf-1.0-et9x00-20120425_usb[/hideguest] [hideguest]openaaf-1.0-et9x00-20120427_usb.zip[/hideguest]
kladovchk: Open AAF ET9X00 Release Image 01.05.2012 Image 01.05.2012 Online Image Änderungen seit dem 18.04 - OpenPli Updates, vielen Dank an das OpenPLi Team für die großartige Arbeit - OpenVix Update, vielen Dank an Andy Black - Plugin Filter (Selektieren und Anzeigen von Plugins im Download Manager, neue Kernel Module zugefügt.) - Timeshift abschaltbar zugefügt (Standard = Timeshift an) - "Python" Camstarter Setup zugefügt (Neustart Versuche können angegeben werden) - Camstarter Startmodus zugefügt (Wahlweise Python oder Linux init.d) - Software Manager ins OpenAAF Panel zugefügt (Software Update, Einstellungen sichern, Einstellungen wiederherstellen, Auswahl der Backup Dateien) - Einstellungen sichern: Eine Liste der installierten Plugins wurde zugefügt - Einstellungen wiederherstellen: Netzwerk Neustart zugefügt, Plugins wiederherstellen - USB-HDD Fix, wenn der Hardwaretimer im Standby verwendet wurde - Radio Taste Fix (Zeigt Radio) - Standard Kanalliste aktualisiert (Deutsche HD Kanäle) - Webinterface update: Fix für das Softcam Panel - Fix Cool Easy TV Skin - Fix Cool Uni TV Skin - Fix Permantenttimeshift und Timeshift: Läuft nun auch direkt auf dem Startkanal - Update Webmedia 7.0 auf dem Feed - Update der AAF default Picons (Deutsche HD Kanäle) - Autoscript für das Swapfile (64MB) wird auf einem USB Stick angelegt. Für GB800XX, VUSolo, ET5000, DM800, DM800se, DM500HD (infolge wenig Speicher) Hinweis für den Backup/Wiederherstellung der Settings: Einstellung sichern erstellt eine Datei mit den installierten Plugins. Wenn der Software Manager feststellt, dass diese Datei vorhanden ist beim Restore, wird nachgefragt ob die fehlenden Plugins installiert werden sollen. Nur Plugins welche noch nicht installiert sind und im vorherigen Image installiert waren werden installiert. Natürlich müssen die Plugins nicht installiert werden, es könne einzelne selektiert werden. Nach dem Restore wird das GUI wie immer neu gestartet (auch wenn keine Plugins installiert wurden). Hinweis für das Swapfile für GB800XX, VUSolo, ET5000, DM800, DM800se, DM500HD: Infolge von wenig Speicher brauchen diese Boxen ein "Swapfile" für das saubere Funktionieren. Das "Swapifle" wird beim ersten Booten erstellt. Stelle sicher, dass Du einen USB-Stick (FAT32 formatiert) mit mindestens 64MB freien Speicher eingesteckt ist. Der USB-Stick darf nicht im Betrieb (auch nicht Standby) abgezogen werden!! changes from 18.04 image: - openpli Updates, big thx to openpli team for the great work - openvix Updates, bix thx to Andy Black - plugin filter (select show plugins in download manager, added kernel modules) - add timeshift = enable/disable - add Python camstarter setup (restart attempts) - add startmode camdstarter (Python camstarter or linux init.d) - add Software Manager in OpenAAF Panel (software update, backup settings, restore settings, select backup files) - backup settings, add installed plugins list to backup file - restore settings, add restart network, install plugins after restore - fix USB-HDD when ussing hardwaretimer for standby - fix radio button (showRadio) - update default channel list (german HD channels) - update webif (fix for softcam panel) - fix cooleasytv skin - fix cool uni tv skin - fix permanenttimeshift and timeshift, works now also on the start channel - update Webmedia7.0 on feed - update aaf default picons for new german tv´s - script create a swapfile (64Mb) on a USB stick for gb800xx, vusolo, et5000, dm800, dm800se, dm500hd (low mem) Note to backup/restore settings: Backup settings will create a file with installed plugins. When the Software Manager notice this file after restore it will ask you if you want to install the missing plugins. Only plugins that are not installed and they are installed on previous image, will be installed. Ofcourse you can cancel or select the plugins to install. After restore there will be a restart gui, like always (even if you cancel install plugins). Note to swap file for for gb800xx, vusolo, et5000, dm800, dm800se, dm500hd: Because of the low memory these boxes need a swapfile to run properly. The swap file will be created the first time you boot. Make sure you have a USB-stick FAT32 with at least 64Mb free space connected to a USB port. Don't remove this stick while running !! [hideguest]openaaf-1.0-et9x00-20120501_usb.zip[/hideguest]
kladovchk: Open AAF ET9X00 Release Image 13.05.2012 Image 13.05.2012 Online Image Änderungen seit dem 01.05.2012 - openpli Updates, big thx to openpli team for the great work - openvix Updates, bix thx to Andy Black - audioselection: fix close screen with key-audio or key-subtitle - aafpanel: fix save keymap selection - infobar: fix minutes - recordTimer: fix action after edit timer from instant record - infobargenerics: fix for Endtime and and Duration of the instand record - eventview: let info button in EventView close the window - networksetup: fix GS in FTP screen - harddisksetup: add show message after Initialization, Filesystem Check, Convert filesystem ext3 to ext4 Image Änderungen seit dem 01.05.2012 - Openpli Updates, herzlichen Dank an das OpenPli Team für die grossartige Arbeit - OpenVix Updates, herzlichen Dank an Andy Black - Audioselection: Fix für Audio und Untertitel Taste beim "Schliessen" - Aafpanel: Fix für das Speichern der "Keymap" - Infobar: Fix für Minutenanzeige (Restdauer) - AufnahmeTimer: Fix für "Aktion" nach dem Timerändern für Direktaufnahmen - Infobargenerics: Fix für Endzeit und Dauer bei Direktaufnahmen - Meldungen: Info Taste schliesst die Meldung - Netzwerkeinstellungen: Fix "Greenscreen" bei den FTP Einstellungen - Harddiskeinstellungen: Zeit nun Meldungen an nach, Initalisieren, Filesystemcheck und Konvertieren von Ext3 zu Ext4 [hideguest]openaaf-1.0-et9x00-20120513_usb.zip[/hideguest]
kladovchk: New VIX Image ET 9x00 Series Version 2.4 15/05/2012 From VIX Team Enigma: 04-05-2012. Enigma Plugins: 04-05-2012. GCC Version: 4.4.4 Vu + Kernel Version: 3.2.2 Vu+ Drivers: 2012-03-23 If you have not already done so you will need to flash the latest bootloader All Users A full flash is required for this version of ViX image. Because of extensive changes you will not be able to perform an online update or restore any settings/plugin backups New Features Blindscan Now uses RF values in GUI not IF. C band searches possible. Supports symbol rates from 1 - 45MHz. Channel Selection Support added to change font sizes and number of rows. Support added to have a 3rd event showing (skin dependent) Support added to display start time and end time for all events shown. EPG Selection Added help screen to all epg selection screens. Added support to change font sizes and number of rows. Language Selection Added English (UK) to available languages. Translations Added support for English (UK). Sorting You may now sort Menus, Settings and Plugin Browser alphabetically. Network Browser Uses less memory during Scan. Moved to new Setup Mounts screen. Openwebif New style webif now accessed using default port 80 Old style webif still available if required for use with certain PC signal meters and Fancontrol 2 About Screen Added network info. Plugins As part of streamlining the image, removed NFS, AFP, Samba, OpenVPN, Inadyn, MiniDLNA & uShare from default image (still available to install through feeds) Bootlogo's Now available for direct install via plugins feed. On Screen Hints Now available as options are selected. USB DVB Added dvb-as102 support (by Gennart1). Skin Brand New skin ViXBMC by markus625 added to feeds. Native skins updated and optimised. Instant Record from channel list, EPG or current channel. Enhanced Movie List Features Latest Drivers (23/3/2012). Loads of under the hood changes made for a smoother user experience. Button Mappings Short Red** & *** - Show current channel EPG info (ViX Single EPG). Long Red*** - HBBTV ( ET series and select channels only). Short Green** & *** - Timers. Long Green*** - AutoTimer Timers. Short Yellow*** - EPG Search. Long Yellow*** - Instant IMDB Database search on the current programme. Short Blue - Extensions. Long Blue*** - Plugins Menu. EPG - Opens ViX EPG. Left/Right** - Opens ViX QuickEPG. Left/Right** - Opens ViX QuickEPG. Up/Down** - Open Full Screen Channel List. TV Button** - Open Full Screen Channel List. Long TV Button - Open Bouquets List. ** Can be changed in ViX Menu *** Can be turned off in ViX Menu Special Thanks •rytec - for his continued support. •zoka.cc for his Picon sets •All developers for their plugins used in the feeds of this image. •All of the ViX Beta team for their hours of testing and dedication on getting this image working. •Rob van der Does, belierzz, rimas, Henkka, raivo, eesatfan, Zartmy, Trial & june8 for their translation work. •Silverfox0786 for channel settings, picons and bootlogo's. •Huevos for his work on blindscan •Gennart1 for dvb-as102 support •Markus625 for skin ViXBMC Note: Not all 3rd party plugins have been tested or are guaranteed to be compatable. Requests If anyone is interested in doing any translation work for the plugins and the image itself, please contact either Andy or Sicilian Download Download site for Latest Open Vix Builds (Beta's) www.openvix.co.uk Stable release below Bootloader for those that need it is the first file [hideguest]ViX-2.4.96-et9x00_usb[/hideguest]
kladovchk: ET9x00, ET6x00 HDF Teamimage v4.9.3 Dieses Image wird das letzte Image mit Basis PLi 2.1 sein. Das nächste Image wird auf PLi 3.0 basieren aber das wird noch ne Weile dauern. Das 4.9.3 ist komplett durchaktualisiert und kann für neue Flashs benutzt werden. Wer ein aktuelles 4.9.2 hat braucht nicht unbedingt zu flashen. Allerdings sind ein paar Plugins dazu gekommen die dann fehlen würden. Clark-tech/Xtrend ET9x00 und ET6x00 HDF Teamimage v4.9.3 basierend wie immer auf dem bewährten PLi 2.1. Den Ordner et9x00/et6x00 auf einen USB-Stick entpacken, anstecken und den Receiver neustarten. Beim ET6000 warten bis die grüne und orange LED leuchten. Dann Taste nach oben an der Front drücken und warten bis der Flash erfolgt ist. Das ET6000 Image ist ein ET9x00 Image mit angepassten Treibern und Hostname. Ansonsten sind die beiden Images gleich. Wer Probleme beim Flashen hat sollte versuchen den Ordner auf dem USB Stick in "ET9X00" (großes X) umzubennen. Das Plugin "Autoinstall" sollte im alten Image deaktiviert sein und es sollten keine alten Backups auf Platte oder Stick vorhanden sein. Sonst wird automatisch wiederhergestellt. Für das Image wird der aktuelle Bootloader benötigt. Der original Bootloader ist von hier: http://www.et-view-support.com/Forum/sho…3625-Bootloader Wenn beim Setup kein Sendersuchlauf gemacht wird ist eine vorbereitete Senderliste enthalten. Es sind keine EMU, Softcams und Configs enthalten. Die können aber bequem über den HDF-Downloader installiert werden. Hinweise zur Bedienung: Rot - HbbTV Rot Lang - Bitrate Viewer Grün - Submenü Unterkanäle Grün Lang - Wechsel 16:9, 4:3 Pillarbox,PanScan Gelb - Audio Einstellungen Gelb Lang - frei (Änderung über MultiQuickButton) Blau - Erweiterungsmenu Blau Lang - Erweiterungen Info - Senderinfo Info Lang - Einfacher EPG des Senders Guide - Cool Multi Guide Guide lang - Zap-History Ok Lang - Virtual Zap Exit - frei (Änderung über MultiQuickButton) Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen 0 - Senderwechsel zwischen aktuellem und letzter Sender < > - Sender History vor und zurück Filelist - Enhanced Movie Center Playlist - Media Player Playlist Lang - frei (Änderung über MultiQuickButton) Timeshift - startet sofort Timeshift Vkey - Aufnahmen mit Enhanced Movie Center Vkey lang - EPG Plugins Search - EPG Suche Search Lang - Softcam Cardserver Manager Menü Lang - EPG Erweiterungen Mark - Weblinks Plugin Pip - Auswahl Pip und Pip Zap Modus TV Lang - TVCharts Radio Lang - SHOUTcast oder WebradioFS Changelog: - Änderungen OpenPLi 2.1 http://twitter.com/#!/openpli - Enigma2: http://openpli.git.sourceforge.net/git/g…gma2;a=shortlog - openembedded: http://openpli.git.sourceforge.net/git/g…dded;a=shortlog - Plugins: http://openpli.git.sourceforge.net/git/g…gins;a=shortlog Änderungen vom Image 4.9.2 zum Image 4.9.3: - Kernel 3.3.0 mit aktuellen Treibern, PLi Update Stand 27.05.2012 (zur Zeit mit Pinguinen) - aktuelle HDF-Toolbox - Anpassungen im Softcam Cardserver Manager (wegen PLi Änderungen) - ext2 und ext3 Kernel Module im Image enthalten - soweit möglich alle Plugins auf aktuellen Stand gebracht - Devicemanager/Datenträgerverwaltung eingebaut (als Ersatz für den MountManager) - aktuelle Senderliste mit den neuen HD-Sendern incl. Picons - EMC Beta 3.0 V632 enthalten - EPG Pfad ist auf /etc/enigma2 eingestellt (kann über EPG Cache Setup geändert werden) - InfobarTunerState in Version 1.0 - Merlin Music Player enthalten - Music Charts Streamer Top100 mit Aufnahmefunktion enthalten - Swap Manager um bei Bedarf Swap Partitionen anlegen zu können - webradioFS in Version 7.83 mit Aufnamemöglichkeit Bekannte Probleme! NTFS Schreiben funktioniert mit dem aktuellen Kernel nicht. Workaround über Telnet: Zitat opkg remove --force-depends ntfs-3g opkg install kernel-module-ntfs Damit wird der Kernel interne NTFS Lesezugriff aktiviert. Alternativ kann man auch in der Datei /etc/filesystems den Eintrag "ntfs-3g" entfernen. Ich hoffe das wird in einem nächsten PLi Update behoben. Wichtig!!! Aktueller Bootloader muss installiert sein. Der Bootloader ist von hier: http://www.et-view-support.com/Forum/sho…3625-Bootloader Bootloader im Anhang herunterladen und per USB-Stick wie ein Image installieren. Der Bootloader im Anhang ist der aktuelle Loader mit et9x00/et6x00 Unterstützung. http://www.hdfreaks.cc/index.php?page=Thread&postID=33518#post33518 Euer HDFreaks-Team [hideguest]et9x00_hdfreaks.v4.9.3_PLi2.1_27052012.zip et6x00_hdfreaks.v4.9.3_PLi2.1_27052012.zip[/hideguest]
kladovchk: Image 31.05.2012 Image Änderungen seit dem 13.05.2012 - openpli Updates, big thx to openpli team for the great work - openvix Updates, bix thx to Andy Black - install picons on usb-stick (format vfat) - fix GS in multiepg and don't zap back with exit - fix "zap+exit" multiepg GB800XX update kernel and driver to 26.05.2012: - fix scam - dvb-core fixed a timeshift problem. - new vfdgiga plugin - workaround going back to deep standby, when recording started from deep standby (after event = auto) - fix image backup - add start Animation VFD Venton HDx: - new fancontrol with support for standby [hideguest]openaaf-1.0-et9x00-20120531_usb.zip[/hideguest]
kladovchk: Open AAF ET9X00 Release Image 16.06.2012 OpenAAF 16.06.2012 image info Image Änderungen seit dem 03.06.2012 - openpli Updates, big thx to openpli team for the great work - openvix Updates, bix thx to Andy Black - Update DVB Drivers GB800xx 04.06.2012 - Update DVB Drivers Venton HDx 09.06.2012 - Update Venton hdx Frontpanel fix Time and Fix Buttons - fix GS SAT Motor Settings - add mediatomb DLNA Server to feed - add DLNA Browser to feed - Update PICONS on feed - fix pvrstate (show picons play, pause, fast forward, fast backwards) - add chartplayer to feed - fix gs when starting cooltvguide before e2 is started complete - fix broken online kernel update all boxtypes - fix Image Backup Venton HDx - fix Image Backup GB800SE - add Image Backup GB800SOLO [hideguest]openaaf-1.0-et9x00-20120616_usb.zip[/hideguest]
kladovchk: SIF TeAm Enigma2 Koala Et9x00 24-6-2012 - Sifteam cloud system (You can connect your sifteam forum account on your stb, in the future release you can backup your image,share channels settings etc etc in your personal account storage) - Graphic skin by daconi. - SifTeam Panel Menu - Software Manager.Added possibility to rank your favourite plugin, you can consult top rated,most downloaded plugin etc etc - Bouquets and Channels Menu. Now you can download your favourite channel list settings. - Exclusive possibility to use Original Sky Ita channel list numeration starting from number 100 like skybox stb - OpenWebIf - System to detect and install Usb devices - Mount Disk manager - Temporary-Static Mount. - Airplay Server - Add NEW Support for Gigablue 800SE, Gigablue 800UE, Gigablue 800 Solo, Gigablue Quattro - Fixed many bugs [hideguest]sifteam-enigma2-koala-et9x00-20120624101757_usb.zip[/hideguest]
kladovchk: ET9x00, ET6x00 HDF Teamimage v4.9.4 ET9x00/ET6x00 HDF-Teamimage v4.9.4 based on OpenPLi2.1 vom 05.07.2012 Clark-tech/Xtrend ET9x00 und ET6x00 HDF Teamimage v4.9.4 basierend wie immer auf dem bewährten PLi 2.1. Den Ordner et9x00/et6x00 auf einen USB-Stick entpacken, anstecken und den Receiver neustarten. Beim ET6000 warten bis die grüne und orange LED leuchten. Dann Taste nach oben an der Front drücken und warten bis der Flash erfolgt ist. Das ET6000 Image ist ein ET9x00 Image mit angepassten Treibern und Hostname. Ansonsten sind die beiden Images gleich. Wer Probleme beim Flashen hat sollte versuchen den Ordner auf dem USB Stick in "ET9X00" (großes X) umzubennen. Das Plugin "Autoinstall" sollte im alten Image deaktiviert sein und es sollten keine alten Backups auf Platte oder Stick vorhanden sein. Sonst wird automatisch wiederhergestellt. Für das Image wird der aktuelle Bootloader benötigt. Der original Bootloader ist von hier: http://www.et-view-support.com/Forum/sho…3625-Bootloader Wenn beim Setup kein Sendersuchlauf gemacht wird ist eine vorbereitete Senderliste enthalten. Es sind keine EMU, Softcams und Configs enthalten. Die können aber bequem über den HDF-Downloader installiert werden. Der Device Manager stammt zu großen Teilen von skaman. Der Rest wurde vom Xtrend-Home Forumteam adaptiert. Der Swap Manager stammt zu großen Teilen von OpenVIX Team. Der Rest wurde vom Xtrend-Home Forumteam adaptiert. Hinweise zur Bedienung: Rot - HbbTV Rot Lang - Bitrate Viewer Grün - Submenü Unterkanäle Grün Lang - Wechsel 16:9, 4:3 Pillarbox,PanScan Gelb - Audio Einstellungen Gelb Lang - frei (Änderung über MultiQuickButton) Blau - Erweiterungsmenu Blau Lang - Erweiterungen Info - Senderinfo Info Lang - Einfacher EPG des Senders Guide - Cool Multi Guide Guide lang - Zap-History Ok Lang - Virtual Zap Exit - frei (Änderung über MultiQuickButton) Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen 0 - Senderwechsel zwischen aktuellem und letzter Sender < > - Sender History vor und zurück Filelist - Enhanced Movie Center Playlist - Media Player Playlist Lang - frei (Änderung über MultiQuickButton) Timeshift - startet sofort Timeshift Vkey - Aufnahmen mit Enhanced Movie Center Vkey lang - EPG Plugins Search - EPG Suche Search Lang - Softcam Cardserver Manager Menü Lang - EPG Erweiterungen Mark - Weblinks Plugin Pip - Auswahl Pip und Pip Zap Modus TV Lang - TVCharts Radio Lang - SHOUTcast oder WebradioFS Changelog: - Änderungen OpenPLi 2.1 http://twitter.com/#!/openpli - Enigma2: http://openpli.git.sourceforge.net/git/g…gma2;a=shortlog - openembedded: http://openpli.git.sourceforge.net/git/g…dded;a=shortlog - Plugins: http://openpli.git.sourceforge.net/git/g…gins;a=shortlog Änderungen vom Image 4.9.3 zum Image 4.9.4: - Kernel 3.3.0 mit aktuellen Treibern, PLi Update Stand 05.07.2012 (zur Zeit mit Pinguinen) - aktuelle HDF-Toolbox - Anpassungen an den Skins Nobile und army.mod - Anpassungen im Softcam Cardserver Manager (wegen PLi Änderungen) - ext2 und ext3 Kernel Module im Image enthalten - soweit möglich alle Plugins auf aktuellen Stand gebracht - aktuelle Senderliste mit den neuen HD-Sendern incl. Picons - AMS und EMC ( Beta708 ) enthalten (bitte nur eines aktivieren) - Merlin EPG Center anstatt CoolTVGuide - EPG Pfad ist auf /etc/enigma2 eingestellt (kann über EPG Cache Setup geändert werden) - InfobarTunerState in Version 1.0 - Merlin Music Player enthalten - Music Charts Streamer Top100 mit Aufnahmefunktion enthalten - Swap Manager um bei Bedarf Swap Partitionen anlegen zu können - Yamp Music Player - webradioFS in Version 8.24 mit Aufnamemöglichkeit - Bild online Plugin - Kicker online Plugin Wichtig!!! Aktueller Bootloader muss installiert sein. Der Bootloader ist von hier: http://www.et-view-support.com/Forum/sho…3625-Bootloader Bootloader im Anhang herunterladen und per USB-Stick wie ein Image installieren. Der Bootloader im Anhang ist der aktuelle Loader mit et9x00/et6x00 Unterstützung. [hideguest]et9x00_hdfreaks.v4.9.4_PLi2.1_06072012.zip et6x00_hdfreaks.v4.9.4_PLi2.1_06072012.zip [/hideguest]
kladovchk: ET9x00, ET6x00 HDF Teamimage v4.9.5 ET9x00/ET6x00 HDF-Teamimage v4.9.5 based on OpenPLi2.1 vom 13.07.2012 Clark-tech/Xtrend ET9x00 und ET6x00 HDF Teamimage v4.9.5 basierend wie immer auf dem bewдhrten PLi 2.1. Den Ordner et9x00/et6x00 auf einen USB-Stick entpacken, anstecken und den Receiver neustarten. Beim ET6000 warten bis die grьne und orange LED leuchten. Dann Taste nach oben an der Front drьcken und warten bis der Flash erfolgt ist. Das ET6000 Image ist ein ET9x00 Image mit angepassten Treibern und Hostname. Ansonsten sind die beiden Images gleich. Wer Probleme beim Flashen hat sollte versuchen den Ordner auf dem USB Stick in "ET9X00" (groЯes X) umzubennen. Das Plugin "Autoinstall" sollte im alten Image deaktiviert sein und es sollten keine alten Backups auf Platte oder Stick vorhanden sein. Sonst wird automatisch wiederhergestellt. Fьr das Image wird der aktuelle Bootloader benцtigt. Der original Bootloader ist von hier: http://www.et-view-support.com/Forum/sho…3625-Bootloader Wenn beim Setup kein Sendersuchlauf gemacht wird ist eine vorbereitete Senderliste enthalten. Es sind keine EMU, Softcams und Configs enthalten. Die kцnnen aber bequem ьber den HDF-Downloader installiert werden. Der Device Manager stammt zu groЯen Teilen von skaman. Der Rest wurde vom Xtrend-Home Forumteam adaptiert. Der Swap Manager stammt zu groЯen Teilen von OpenVIX Team. Der Rest wurde vom Xtrend-Home Forumteam adaptiert. Дnderungen vom Image 4.9.4 zum Image 4.9.5: - PLi Update Stand 13.07.2012 (zur Zeit mit Pinguinen) - aktuelle HDF-Toolbox - Anpassungen an den Skins Nobile und army.mod - Fehler mit dem integrierten Movie Player behoben - SeriesPlugin 0.5.5 integriert (mit Config Anpassung von itz4mie) - aktuelle Version WebradioFS - Cool TV Guide 6.0.3 unter Erweiterungen aber deaktiviert - EMC ( V3 Beta708 ) enthalten funktioniert zusammen mit dem SeriesPlugin - Merlin EPG Center aktiviert anstatt CoolTVGuide (kann mit MultiQuickButton geдndert werden) - EPG Pfad ist auf /etc/enigma2 eingestellt (kann ьber EPG Cache Setup geдndert werden) - InfobarTunerState in Version 1.0.1 Changelog OpenPLi: - Дnderungen OpenPLi 2.1 http://twitter.com/#!/openpli - Enigma2: http://openpli.git.sourceforge.net/git/g…gma2;a=shortlog - openembedded: http://openpli.git.sourceforge.net/git/g…dded;a=shortlog - Plugins: http://openpli.git.sourceforge.net/git/g…gins;a=shortlog Hinweise zur Bedienung: Rot - HbbTV Rot Lang - Bitrate Viewer Grьn - Submenь Unterkanдle Grьn Lang - Wechsel 16:9, 4:3 Pillarbox,PanScan Gelb - Audio Einstellungen Gelb Lang - frei (Дnderung ьber MultiQuickButton) Blau - Erweiterungsmenu Blau Lang - Erweiterungen Info - Senderinfo Info Lang - Einfacher EPG des Senders Guide - Merlin EPG Center Guide lang - Zap-History Ok Lang - Virtual Zap Exit - frei (Дnderung ьber MultiQuickButton) Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen 0 - Senderwechsel zwischen aktuellem und letzter Sender < > - Sender History vor und zurьck Filelist - Enhanced Movie Center Playlist - Media Player Playlist Lang - frei (Дnderung ьber MultiQuickButton) Timeshift - startet sofort Timeshift Vkey - Aufnahmen mit Enhanced Movie Center Vkey lang - EPG Plugins Search - EPG Suche Search Lang - Softcam Cardserver Manager Menь Lang - EPG Erweiterungen Mark - Weblinks Plugin Pip - Auswahl Pip und Pip Zap Modus TV Lang - TVCharts Radio Lang - SHOUTcast oder WebradioFS Wichtig!!! Aktueller Bootloader muss installiert sein. Der Bootloader ist von hier: http://www.et-view-support.com/Forum/sho…3625-Bootloader Bootloader im Anhang herunterladen und per USB-Stick wie ein Image installieren. Der Bootloader im Anhang ist der aktuelle Loader mit et9x00/et6x00 Unterstьtzung. [hideguest]et9x00_hdfreaks.v4.9.5_PLi2.1_13072012.zip et6x00_hdfreaks.v4.9.5_PLi2.1_13072012.zip[/hideguest]
kladovchk: openAAF 2.0 ET9X00 OpenAAF 2.0 based on the OE-Alliance build environment. We made all our sources public and created a new openAAF-git. This is the first OE 2.0 image. In the future there will be Nightly images. OpenAAF Image content: • HbbTVSkin (DMConcinnity HD Mod Skin) • HbbTVLite Skin (DMConcinnity HD Mod Skin) • OpenAAF Panel • Permanent timeshift • Media Player • OpenWebIf • keymap selection (standard, own, followed by neutrino) • HDMI CEC • DVD Player • Own Plugin Feed • Blue Panel • GUI opacity altered • Blind Scan • Swap Manager • PiconsAstra 19.2 and the German-language channels on Hotbird 13.0 (only ET9X00 and ET6X00) • fancontrol (is Boxabhдngig) • Current Settings Astra 19.2 and Hotbird 13.0, 23 and 28 degrees • CooTGuide version 6.04 Special thanks to Coolman • EMC 3.0 Beta for OE 2.0 Special thanks goes to Coolman and Betonme • WLAN driver • Auto Timer • and much more ... AAF specials: • Skin and Skin Lite normally selectable in the menu (including 2nd infobar) • Web browser on the ET feed (Only for ET9X00 and ET6X00!) • Online update package with display • Own Feed (online updates) • Change the display settings (screen icons) • Install software fully integrated (full backup, secure settings, etc.) • Setting the key assignment • and much more .. Standard color keys: Blue Key short: Blue Panel Blue Key length: Red Key short HbbTV provided on the transmitter, otherwise the panel OpenAAF Red Key long: When enabled, the panel Softcam Yellow Key short shift (default) / audio settings Yellow Key length: Green Key short option channels where available, or extensions Green Key length: aspect ratio (aspect ratio) [hideguest]openaaf-2.0-et9x00-20120729_usb.zip openaaf-2.0-et6x00-20120729_usb.zip openaaf-2.0-et5x00-20120729_usb.zip click here [/hideguest]
kladovchk: CuBiC 2.0 public Beta build010 The new DaCube Image 2.0 goes OpenPli now comes the Public Beta. CuBiC 2.0 Public Beta Build 010 Features: enigma2 Base OpenPli 3 CuBIC Core - based on openPli 3.0 Linux Kernel - Vu+ 3.1.1, Dreambox 3.2.25, Xtrend 3.4.3 DLNA Server UPNP Browser Online Update CuBiC HD Skin Share Bar with gBox Support YAMP Music Player Multi Language Support in our Panel (Ungarian, German, (Russian with Build 011) (We search for translators) Online Feed News: Here is the public release from CuBiC 2.0 build 010. The Image use Online Updates and you can if we release an new Build make an Update over our Panel. Should an update failures, which can happen from time to time, so you can use the flash image that we deposit at any online update in our ULC . With the Online Update feature will we give Long Time Support for our Images and we will make it with every Update an little bit better. Bugtracker: If you find Bugs, so can you use our Bugtracker. For Hardware: DM500 HD DM7020 HD DM800 SE DM8000 VU+ Solo VU+ DUO VU+ UNO VU+ ULTIMO Xtrend et5x00 Xtrend et6x00 Xtrend et9x00 Changelog: Build 010: From openPLI Team: All PLi Updates incl. Wed, 29 Aug 2012 21:16:30 From DaCube Team: Change: Addon Manager to seperate Call Menü Fix: epg.dat HDD Spin problem Fix: Startproblem scam, gbox, mgcamd (Install from our Feed or use our offline Cam Package) Fix: BackupSuite was not working Fix: CronManager Change: OnlineUpdate shows now installable Packages before an upgrade runs New: YAMP integrated Remove: MediaPlayer [hideguest]CuBiC-2.0-beta-et9x00-20120830140620_usb.zip[/hideguest]
kladovchk: ET9x00, ET6x00 HDF Teamimage v6.2 ET9x00/ET6x00 HDF-Teamimage v6.2 based on OpenPLi3.0 vom 03.10.2012 Clark-tech/Xtrend ET9x00 und ET6x00 HDF Teamimage v6.2 basierend dem neuen openPLi 3.0 mit OE 2.0. Das Image ist komplett PLi updatefдhig bzw. ьber das HDF PLi und Spinnerupdate. Das v6.2 Image ist sehr umfangreich und zeigt was zur Zeit mцglich ist. Den Ordner et9x00/et6x00 auf einen USB-Stick entpacken, anstecken und den Receiver neustarten. Beim ET6000 warten bis die grьne und orange LED leuchten. Dann Taste nach oben an der Front drьcken und warten bis der Flash erfolgt ist. Das ET6000 Image ist ein ET9x00 Image mit angepassten Treibern und Hostname. Ansonsten sind die beiden Images gleich. Wer Probleme beim Flashen hat sollte versuchen den Ordner auf dem USB Stick in "ET9X00" (groЯes X) umzubennen. Das Plugin "Autoinstall" sollte im alten Image deaktiviert sein und es sollten keine alten Backups auf Platte oder Stick vorhanden sein. Sonst wird automatisch wiederhergestellt. Fьr das Image wird der aktuelle Bootloader benцtigt. Der original Bootloader ist von hier: http://www.et-view-support.com/Forum/sho…3625-Bootloader Wenn beim Setup kein Sendersuchlauf gemacht wird ist eine vorbereitete Senderliste enthalten. Der Device Manager stammt zu groЯen Teilen von skaman. Der Rest wurde vom Xtrend-Home Forumteam adaptiert. Der Swap Manager stammt zu groЯen Teilen von OpenVIX Team. Der Rest wurde vom Xtrend-Home Forumteam adaptiert. Дnderungen zum Image v6.1: - PLi Update Stand 03.10.2012 (Linux mips 3.4.3 #1 SMP Sun Sep 23 04:04:51 CEST 2012) - WLan USB Treiber gefixt - aktuelle HDF-Toolbox - aktuelle Versionen der installierten Plugins Дnderungen zum Image v6: - PLi Update Stand 01.10.2012 (Linux mips 3.4.3 #1 SMP Sun Sep 23 04:04:51 CEST 2012) - alle verfьgbaren WLan USB Treiber - aktuelle HDF-Toolbox - aktuelle Versionen von WebradioFS, VFD Setup, BackupSuite, Webmedia, YTTrailer, msn Wetter, Bild Online - Fixes und Anfragen aus dem v6 Thread - bootlogo.* kann verwendet werden unter /usr/share/ oder /hdd/ (einfach ein Video names bootlogo.endung nehmen) - enthalten sind CCCam, Scam359,Scam360, Oscam-ymod, Oscam (Webinterface jeweils ьber Port 88 zu erreichen) - LCD4Linux musste vorerst weichen (kann ьber den HDF-Downloader nachinstalliert werden). Changelog OpenPLi: - Дnderungen OpenPLi http://twitter.com/#!/openpli - Enigma2: http://openpli.git.sourceforge.net/git/g…gma2;a=shortlog - openpli-oe-core: http://openpli.git.sourceforge.net/git/g…-core;a=summary - Plugins: http://openpli.git.sourceforge.net/git/g…gins;a=shortlog Hinweise zur Bedienung: Rot - HbbTV Rot Lang - Bitrate Viewer Grьn - Submenь Unterkanдle Grьn Lang - Wechsel 16:9, 4:3 Pillarbox,PanScan Gelb - Audio Einstellungen Gelb Lang - frei (Дnderung ьber MultiQuickButton) Blau - Erweiterungsmenu Blau Lang - Erweiterungen Info - Cool Single Guide Info Lang - Einfacher EPG, TV Spielfirm Events, TV Charts Guide - Merlin EPG Center Guide lang - Zap-History Ok - Infobar und Second Infobar Exit - Virtual Zap Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen 0 - Senderwechsel zwischen aktuellem und letzter Sender < > - Sender History vor und zurьck Filelist - Enhanced Movie Center Playlist - Media Player Playlist Lang - frei (Дnderung ьber MultiQuickButton) Timeshift - startet sofort Timeshift Vkey - TV Charts Vkey lang - EPG Plugins Search - frei (Дnderung ьber MultiQuickButton) Search Lang - Softcam Cardserver Manager Menь Lang - EPG Erweiterungen Mark - Weblinks Plugin Pip - Auswahl Pip und Pip Zap Modus TV Lang - TVCharts Radio Lang - Radio, SHOUTcast oder WebradioFS Wichtig!!! Aktueller Bootloader muss installiert sein. Der Bootloader ist von hier: http://www.et-view-support.com/Forum/sho…3625-Bootloader Bootloader im Anhang herunterladen und per USB-Stick wie ein Image installieren. Der Bootloader im Anhang ist der aktuelle Loader mit et9x00/et6x00 Unterstьtzung. [hideguest]et9x00_HDFreaks.v6.2_PLi3.0 et6x00_HDFreaks.v6.2_PLi3.0[/hideguest]
kladovchk: SIF TeAm Enigma2 Jackal Et9x00 17-1-2013 New Horizon skin by MMark Updated odin drivers to 03/13/2013 Updated gbquad drivers to 17/17/2012 Updated dmm drivers to 07/12/2012 Updated technomate drivers to 08/12/2012 Updated xtrend drivers to 10/11/2012 Added support for vusolo2, odinm7, tmsingle, ventonhde, ebox5000, xp1000, ixussone Fixed a867 support for xtrend decoders (thanks to unixer - sifbox) Added a867 support for dmm kernel Added autobouqetmaker New skin selector with sub-skins feature Fixed VFD on ventonhdx Added fan and lcd management for ventonhdx (thanks to a4tech/ventonsupport) Fixed now/next title for tvsat services Fixed hard disk manager Removed cloud support New default elements for blue panel Fixed package status in Software Manager Fixed network mount for samba shares Many others small fixes! Many thanks to skaman, oe-alliance , sifteam forum and betatesters for giving feedback and support. opensif-3.0-et9x00-20130117_usb opensif-3.0-et6x00-20130117_usb.zip opensif-3.0-et5x00-20130117_usb.zip opensif-3.0-et4x00-20130117_usb.zip
полная версия страницы